I have a Bosch HMB405. It no longer heats food at all. It went from full function to failed in one day. Reset power level to no avail. Reset breaker to no avail.

Hello & Welcome to FixYa This indicates a open/shorted oven temperature sensor and to solve this problem the sensor needs replacement. If you wan to be sure before replacing the sensor then you can test it with a voltmeter for around 1100ohms....if it reads more then this then it needs replacement however, if the reading is around or less then 1100ohms then it is the control board that needs replacement. Please get back to me if you have any other questions. Kevin

SOLVED: I have a Bosch HMB405. It no longer heats food at - Bosch HMB405 Oven

0helpful

1answer

I have a integrated Bosch oven and it bleeps when I open the oven door and when it has been on for over 30 mins. What does the beep mean?

Generally it tells you that the food is cooked if the 'integrated oven has a microwave function. Or of course it is a fault. You can often fix that with a Power Reset.

https://www.google.com/search?q=integrated+Bosch+oven+and+it+bleeps+when+I+open+the+oven+door+and+when+it+has+been+on+for+over+30+mins

..

Read full answer

Oct 05, 2022 • Bosch Ovens

tip

Common heating faults with Bosch HBL3420UC Electric single oven

For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Bosch fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BOSCH element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BOSCH fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BOSCH oven thermostat
4, A quite common and easily overlooked answer is if your BOSCH oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

Read full tip

on Jan 19, 2010 • Bosch HBL3420UC Electric Single Oven

tip

Common heating faults with Bosch HBL 5032 single oven

For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Bosch fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BOSCH element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BOSCH fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BOSCH oven thermostat
4, A quite common and easily overlooked answer is if your BOSCH oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

Read full tip

on Jan 19, 2010 • Bosch HBL 5032 Electric Single Oven

1helpful

1answer

Following a loud ban the eye level display went out and the ovens stopped heating but the lights in each oven remained on. Are there fuses or breakers within the oven which could have blown?

Generally there is not a fuse inside the unit. Either the transformer for the control failed or the heating element burned out.

Read full answer

Jun 30, 2018 • Bosch Ovens

0answers

Bosch single oven has clock function but when I reset it goes to military time

Read full answer

Be the first to answer Jun 18, 2017 • Bosch Ovens

tip

Common heating faults with Bosch HBN 430560B / 430520B single oven

For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Bosch fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BOSCH element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BOSCH fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BOSCH oven thermostat
4, A quite common and easily overlooked answer is if your BOSCH oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

Read full tip

on Jan 19, 2010 • Bosch HBN 430560B / 430520B Single Oven

0helpful

1answer

I have a gaggenau oven EB 295. The door lock symbol is lit up. The door is opening though and when I turn the oven on it does not heat up. It just beeps every 30 seconds. How do I fix this?

Our upper oven lock motor has failed. Gaggenau/Bosch indicates no part is available. The lower electric lock appears to be available. Will it work on the top oven? Is there a way to bypass the lock so the oven functions?

Read full answer

Jun 08, 2014 • Gaggenau EB 270/271 Electric Single Oven

0helpful

1answer

I need an instruction manual for a red centre outdoor gas oven

Instructions Things You'll Need:

Power supply

Press the "Clock" button, then the correct number buttons to set the desired time. Press "Clock" again to confirm.
Press "Timer" to set the timer function. Choose the desired countdown time by pressing the number pads, then the "Start/Stop" button. Press "Timer," then "Reset" to cancel the timer.
Press the number pads to select a cooking time. Press "Power" to use a power less than 100 percent using the number "9" for 90 percent of full power, "8" for 80 percent, "7" for 70 percent, and so forth. Press "Start" to begin cooking.
Press "Defrost by Weight" to defrost a food item by the weight of the item. Enter the weight of the item, then touch "Start" to begin. Enter the food weight by pounds and ounces, using a "0" for a decimal. For instance, if the food weighs 1 pound, 2 ounces, enter "1," "0," "2," then "Start".
Select "Speed Defrost" to defrost food quickly. Enter the desired cooking time and press "Start."

Read full answer

Dec 21, 2010 • Ovens

0helpful

1answer

My HBL452 double oven is slow to heat both upper

Hi,
If your electric

oven is not heating then you probably have a bad heating element in your oven. This is not that hard to fix yourself...
Check out this tip that I wrote about the Oven not heating problem..

Oven Problems Electric

Oven is Heating Slowly or Poorly
http://www.fixya.com/support/r4511800-oven_problems_electric_oven_heating

heatman101

Read full answer

Dec 01, 2009 • Bosch HBN 452 / HBN 456 Electric Double...

0helpful

1answer

Instruction manual

HI SIR
When you first use your Oven, the Oven will need to "settle". That is, it needs to burn off production residues and dust. The metal used in the Oven will also expand slightly when first used. You will experience some crackling and a strong smell. This is perfectly normal and we advice you anticipate this "settling" prior to use. Using an empty Oven, select Function 4 and set a temperature of 250°, allow the Oven to "settle" for hour, turn to function 3 and heat for a further 1/2 hour.
Multifunction Oven Function Selections

2. Defrost - This function activates the fan only, (no heat is used) to allow controlled and hygienic defrosting.
3. Conventional cooking - Normal or traditional cooking functions using the top and bottom elements. When using this function set the thermostat between 50 - 250°C. When the desired temperature is reached the yellow light will go out and then alternate between lit and unlit as the temperature is controlled.
4. Fan-Forced cooking - This selection is best for multilevel cooking as the heat generated by the central element is circulated around the Oven, creating an even heat environment. You will need to set the thermostat dial between 50-250°C for this function.
5. Center Griller - For best results set the thermostat to MAX. The door may remain closed or completely open.
6. Large Griller - For best results set the thermostat to MAX. The door may remain closed or completely open.
7. Fan Griller - This function combines the grill element with fan assistance and is used in conjunction with the thermostat. The Oven door must remain CLOSED during cooking. The thermostat dial should be set between 50-250°C for this function.
8. Fan-assisted Baking or Patisserie Setting - Combines the concealed bottom element with fan assistance and is used in conjunction with the thermostat. The Oven door must remain CLOSED during cooking.

top

Advanced Oven Features

Cavity Cooling
The Oven has an advanced cavity cooling system. A cylindrical fan is mounted on the rear outside frame of the Oven. This fan assists the movement of air through the Oven cavity keeping it cool. In addition to reducing the temperature in the Oven cavity, the air is blown out around the Oven door handle which keeps the door handle cool. The cooling fan is activated when the Oven light or any cooking function is selected and will switch off after all Oven functions have been turned off.

Triple Reflective Door Glazing
Some Ovens have two levels of removable door glass. The two inner layers are removable and are made of a reflective glass which, in effect, reflects heat back into the Oven and results in a significant reduction in the outside door surface temperature. To clean the door glass, use a coin or large screwdriver to remove the screws. Wipe both sides of the inner, middle and outer glass. Wipe the sealing gasket. Don't forget to replace the rubber sealing gasket around the centre glass layer before replacing the glass. Ensure the narrow air gap lies between the inner and centre glass layers and the wider gap lies between the centre and outside glass layers. Tighten each screw gradually, one then the other until firm. Do not overtighten.

Wipe Clean Enamel (Extra Optional)
Some models have easyclean blue enamel paint throughout the internal cavity walls. Other models have baking trays and grill pans finished in the soft grey super tough "wipe clean" enamel. This enamel is less porous than conventional, so that food does not adhere as easily. Simply wipe clean with a soapy cloth or creme cleanser when cooking is finished. For baked on residue, use a smooth scraper or if necessary a non-caustic Oven cleaner.

Drop Down Grill Element (Extra Optional)
The removal of a single screw at the front of the upper grill element in some models allows the element to drop down so that cleaning of the roof of the Oven is made easy. On completion of cleaning, simply replace the grill element and secure with the screw, finger-tight.

top

The Electronic Timer

Normal Baking

Function 3: Normal Oven baking using heat from both the upper element and concealed lower element.

To bake, place the Oven rack in the appropriate position according to the type of food to be cooked. Turn the Function Selector to Position 3 and the thermostat knob to the correct temperature, and allow the Oven to fully preheat for best results.

Ideal for cooking casseroles, soufflés, roast, meats, and other items which require a slow method of cooking.

top

Fan Forced Baking

Function 4: Fan-forced central element cooking requires slightly different timing techniques than normal cooking. The fan draws the air in and over the central element which is positioned around the fan and then circulates it back around the Oven cavity. The even distributor of heat allows foods to rise and cook simultaneously regardless of shelf level. Lower cooking temperatures and in some cases less cooking time is another advantage of this feature.

Turn the Function Selector to Position 4 and turn the thermostat to the desired temperature. Pre heating takes much less time than a normal bake Oven.

Note: When cooking meats, for best results always preheat the Oven to ensure the meat surface is sealed to lock-in juices for a moist and tender result.

Fan forced cooking is ideal for multilevel cooking e.g.. patty cakes. Another advantage of fan forced cooking is that different types of food may be cooked simultaneously without mixing the aromas or flavours. When using the Oven in this way, ensure that all the foods require the same cooking temperature and check the finish times of each dish for best results.

Please note that fan-forced cooking is faster than conventional methods, so take care not to burn your food when you first start using this method.

top

Grilling

Function 5 & 6: During grilling the door may remain closed or completely open.

This function offers the traditional grilling method necessary to achieve proper browning without overcooking the interior of the foods.

Position 5 activates the centre section of the upper grill element only, which is ideal for browning smaller portions or thinner cuts of meat.

Position 6 activates the entire upper element for the grilling of large quantities or thick cuts of meat.

Allow the griller to pre-heat for approx. 2 minutes before sliding the tray into position.

Place the grill tray into the roasting pan and arrange food according to the function you have selected, either in the centre of the tray or spread across the full width of the tray. Position the tray at the correct grilling level and turn the thermostat control to MAX for best results.

As the temperature is set to MAX you may need to adjust your grilling shelf height to suit the desired cooking result. If the tray is too close to the element, the food will be exposed to the full effect of the element and may burn and create smoke.

Read full answer

Sep 11, 2008 • Ovens

Related Topics:

I have a Bosch HMB405. It no longer heats food at all. It went from full function to failed in one day. Reset power level to no avail. Reset breaker to no avail.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a integrated Bosch oven and it bleeps when I open the oven door and when it has been on for over 30 mins. What does the beep mean?

Common heating faults with Bosch HBL3420UC Electric single oven

Common heating faults with Bosch HBL 5032 single oven

Following a loud ban the eye level display went out and the ovens stopped heating but the lights in each oven remained on. Are there fuses or breakers within the oven which could have blown?

Bosch single oven has clock function but when I reset it goes to military time

Common heating faults with Bosch HBN 430560B / 430520B single oven

I have a gaggenau oven EB 295. The door lock symbol is lit up. The door is opening though and when I turn the oven on it does not heat up. It just beeps every 30 seconds. How do I fix this?

I need an instruction manual for a red centre outdoor gas oven

My HBL452 double oven is slow to heat both upper

Instruction manual

Not finding what you are looking for?

HMB405 Oven

I have a integrated Bosch oven and it bleeps when I open the oven door and when it has been on for over 30 mins. What does the beep mean?

Ask a Question

Top Bosch Ovens Experts

ZJ Limited

Paul Carew

Cindy Wells

Are you a Bosch Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

I have a Bosch HMB405. It no longer heats food at all. It went from full function to failed in one day. Reset power level to no avail. Reset breaker to no avail.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a integrated Bosch oven and it bleeps when I open the oven door and when it has been on for over 30 mins. What does the beep mean?

Common heating faults with Bosch HBL3420UC Electric single oven

Common heating faults with Bosch HBL 5032 single oven

Following a loud ban the eye level display went out and the ovens stopped heating but the lights in each oven remained on. Are there fuses or breakers within the oven which could have blown?

Bosch single oven has clock function but when I reset it goes to military time

Common heating faults with Bosch HBN 430560B / 430520B single oven

I have a gaggenau oven EB 295. The door lock symbol is lit up. The door is opening though and when I turn the oven on it does not heat up. It just beeps every 30 seconds. How do I fix this?

I need an instruction manual for a red centre outdoor gas oven

My HBL452 double oven is slow to heat both upper

Instruction manual

Not finding what you are looking for?

HMB405 Oven

I have a integrated Bosch oven and it bleeps when I open the oven door and when it has been on for over 30 mins. What does the beep mean?

Related Topics

Ask a Question

Popular Questions

Bosch integrated oven has a c11 error code. What does this mean please.

Oven thinks probe is connected when it is not and

My bosch oven - HBA

Bosch HBL745A Oven door

Bosch oven cooling fan is continuously on at the same speed and is on always no matter what the temperature is. Upper heating element does not turn red hot in broil mode.

Top Bosch Ovens Experts

ZJ Limited

Paul Carew

Cindy Wells

Are you a Bosch Oven Expert? Answer questions, earn points and help others

Manuals & User Guides