Question about Celestion S10 Subwoofer

2 Answers

Pc connection Hi, can i connect the audio out from a pc to the left and right line in on the S10 using a audio splitter cable, and then connect celestion speakers to the Speaker Outputs on the S10? There are 4 speaker outputs (left,right, + and -) and I when I try and screw the speaker wires into these outputs there is no sound from the speakers but the base is coming from the S10.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

What you are proposing will not work.
You can EITHER use the Line inputs OR high level speaker inputs.

Using the line inputs, your L&R line level signals pass through the sub on their way to a stereo amp, then speakers.

Using the Speaker inputs, your L & R speaker cables connect from your amp (or PC speaker outputs) to the "Speaker input" terminals. The "Speaker output" terminals then connect to your speakers.

Posted on May 19, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,148 Answers

Yes,,,i think it will on run 2 speakers,,, get y cables

Posted on May 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can the 4x8 splitter be used as a 2x4 or 3x6?


You do not have to use all connections on a splitter.
Simple splitters don't have "inputs" vs "outputs".
This one might; One input may have two outputs.
Work from left to right or vice versa. The internal wiring will be simple, the left most input should connect to the two left most outputs. (and so on)

Jun 16, 2012 | Eagle Aspen Dtv4x8 Directvapproved 4 In X...

1 Answer

Getting distorted sound when connecting from mac pc headphone jack to 1/4" line in input


You are connecting a NOISY unbalnced line to a balanced input. Buy a DI box and then use an XLR to XLR to the mixer inout and run the MAC into the DI with "ground lifted". You will need to make a resistive mixer between the headphone jack and the DI as well. The headphone jack is STEREO. You COULD try a STEREO 1/8 inch splitter to 1/4 inch left and right cable... you MIGHT get away with that. Right now the left and right amps in the MAC are fighting eachother.

Sep 25, 2011 | Samson New Samson Mdr-1064 10 Channel...

1 Answer

We are trying to set up a dual monitor system so that we cn watch movies via the pc [not laptop] we have plugged in all the cables but still zilch


if you want to set up a dual tv monitor system using via pc as a source you will need a VGA splitter usually 2 or more output. now how are you going to connect the 2 monitor and PC to the VGA splitter. first make sure your tv monitor is supported by service input for PC unit. then prepare the accessories needed. the VGA splitter and VGA cable. vinceisaac_30.jpg vinceisaac_31.jpg sample image for VGA splitter VGA cable or connector how are you going to hook up the splitter and VGA cable to the tv monitor and PC
  • you need 3 vga connector and 1 splitter to connect a dual monitor system.
  • connect one end of the vga connector to the pc unit and the other end to the input port of splitter.
  • now the 2 remaining vga connector connect to the output of splitter either of the port, then the 2 end wire you must connect to the input port ( pc service port ) of the 2 tv monitor. make sure you set up the right input either with the remote or at the tv unit to recognized the pc source.
  • you almost done the connections now at this point plug the tv monitors, plug the dc adapter supply of the vga splitter and lastly turn on the pc unit to view movies. i hope it will help you just ask me if you have further questions thanks for choosing the fixya.

Jun 05, 2011 | Televison & Video

1 Answer

Want to connect my thinkpad to the Olevia 532-B12 CD TV. Cables I have found show 15pin conenctors for the video and signle RCA plugs for audio. The back of the TV indicates it needs an audio splitter...


what connections to you have on your computer? because it is best to match connections with tv to computer. s video? hdmi? they sell av or color stream cables with a splitter to connect to computer color stream is just for picture av (RCA input) is for both video and sound.

Jan 31, 2011 | Olevia Televison & Video

2 Answers

I HAVE TWO SMALL SPEAKERS HOOKED UP TO MY COMPUTER AND I WOULD LIKE TO CONNECT MY LCD SCREEN SPEAKERS TO MY COMPUTER INSTEAD OR IN ADDITION TO THE LITTLE ONES THAT I HAVE THAT HAVE LOW QUALITY SOUND. WHAT...


You can get a line splitter at Radio Shack,WalMart,BestBuy,Compusa etc. Just tell them you need a PC audio line splitter,they'll know what you mean.And they don't cost very much,$3-$4.Radio Shack will be the most expensive.You plug the male end into your audio board,and the male end from each set of speakers into the female end on the splitter.There's a link to a picture below.
If this helps,would you please rate my post?
Thanks
Bob
https://www.cablesforless.com/p-132-stereo-splitter-6-inch-male-35mm-plug-to-2x-female-35mm-plugs.aspx

Aug 19, 2010 | Computers & Internet

2 Answers

Dear Technician, I have 4 components that I am trying to connect together, a Panasonic HDTV model #TC-L32X1, a GO Video DVD/VCR model #DV2130, a Yamaha stereo receiver model#RX-690, and a Scientific...


Hi and welcome to FixYa,

Unfortunately, size limitation of what could be attached prevents posting a connection diagram. Still, proposed connection scheme:
  • 4250HDC's HDMI to Panasonic's HDMI 1 or 2;
  • 4250HDC's VIDEO OUT to GoVideo's LINE IN 1 VIDEO;
  • 4250HDC's AUDIO OUT to 2 pcs of RCA Splitters (shown below);
  • 1 pair from the 2 splitters to GoVideo's LINE IN 1 R-AUDIO-L;
  • the other pair to Yamaha's LD/TV L & R;
  • GoVideo's LINE OUT VIDEO to Panasonic's VIDEO IN 1 VIDEO;
  • GoVideo's LINE OUT R-AUDIO-L to 2 more RCA Splitters;
  • 1 pair from the 2 splitters to Panasonic's VIDEO IN 1 L-AUDIO-R;
  • the other pair to Yamaha's VCR 1 IN L & R;
  • to watch cable TV in HD quality, set Panasonic to HDMI 1 or 2 by pressing Panasonic remote's INPUT button, then 3 (or 4), then OK;
  • to hear cable TV programs on Yamaha's speakers, set Yamaha to LD/TV;
  • to watch DVD or VHS, set Panasonic to Video 1 by pressing Panasonic remote's INPUT button, then 6, then OK;
  • to hear DVD or VHS on Yamaha's speakers, set Yamaha to VCR 1;
  • to record cable TV programs, press GoVideo remote's TV VIEW button a couple of times to cycle through the signal sources or until Line 1 is displayed.

The use of the splitter shown below would effectively double the AUDIO OUT of the cable box and the DVD/VCR combo to feed both the TV and the stereo. Additionally, this would allow use of the cable box and/or the DVD/VCR combo with or without the Yamaha.

dd46b75.jpg or

27340be.jpg or

2231969.jpg

Good luck and thank you for asking FixYa.

Apr 27, 2010 | GoVideo Go Video DVD/VCR Combo

1 Answer

HOW CAN I HOOK UP CAVILIER 200A POWER AMP TO A sony str av 770x f


You can pull the Left and Right stereo program from either MD/Tape or Video 2 Audio OUTputs. Run a pair of RCA cables to the Active EQ's Line IN; then the EQ's Line OUT to the Cavalier's Line IN.

If the Tape output you're borrowing the program from is already connected to something, use RCA-cable splitters.

Remember to NEVER activate the monitor for that Tape function during playback of any digital audio source - it disables the digital input; or if the 901's are being used - it will remove the signal to the Cavalier.

Now if you wanted to use the 901's in your movie listening this will work with two limitations

Your receiver doesn't have preamp outputs for Front Left and Right out so you'd be extracting only the mixed-down 2-channel version of whatever the Sony is processing.

You'll have to manually control the Cavalier's volume because the pre-out you're using is BEFORE the Sony's volume control.

It might still be an improvement over what you have now.

Mar 21, 2010 | Sony STR-DE675 Receiver

1 Answer

How to hook up vcr and dvd together ?


|DVD| -> |VCR| -> |TV|

1. Connect your VCR to your TV. (Using Antena cable or RCA cables.)

2. From your DVD player, choose the AUDIO VIDEO OUT. Then, connect that to your VCR's LINE IN jacks.

(*)Your DVD player has 3 jacks coming out. Yellow-video, White- Audio Left and Red- Audio Right.
If you VCR does not have the RED jack. Go to a radio shack and tell on of the sales person taht you need to connect 2 RCA audio outs to 1 RCA audio in. (He/ She will give you a "2RCA Male to 1RCA Female" splitter)

3. Finally, play your DVD, put your VCR channel in TV and most important select the LINE channel in your VCR. (This channal may called as L1, Line,... etc)

You should be seeing the DVD in your TV now.

If you want to play the VCR, just put the casset and play.

Important- The VCR needs to be powered on in order to the DVD signals to go to the TV.

Cheers!!!!

Feb 27, 2009 | TruTech TT1620 DVD Recorder

1 Answer

Cable TV connection


Hi, A couple of possibilities: 1. Line loss, some of the cables might be too long, shorted, loose ground, not connected right; 2. Splitter - passive splitter, you might be better off using a distribution amplifies (with gain control pref); 3. RFI - TV interference from external sources. Hope this be of some help/idea. Post back how things are or should you need further information. Good luck and kind regards.

Sep 02, 2007 | Televison & Video

Not finding what you are looking for?
Celestion S10 Subwoofer Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Celestion Audio Players & Recorders Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Celestion Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...