Question about HP Officejet 6310 All-In-One InkJet Printer

1 Answer

Installing problems When I first tried to install this printer for Windows Vista, it said it was successfully installed but when I tried to print something it didn't work...I went back and uninstalled everything to see if I could start from scratch...but now when I put in the installing CD, the CD won't even load...I am stuck I need some serious help...please!!!

Posted by on

  • kleewaile Jul 13, 2008

    yeah i finally got it to load but i had to go into the computer file and right click on it to tell it to load...but i have the same problem every time i plug in the printer usb cable into my lap top it tries to re-install itself. At least i have someone who knows what i'm talking about! Thanks again for the help!!! It really means a lot!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you are working with Microsoft Vista, then take your pc or notebook back to the company you bought it that they can reload Vista. It is probably a software problem. With me it installed etc and i can print, but each time that i must plug in the printer usb cable in my notebook, it tries to install it again. Finally goes the reason, Vista software problems.

Posted on Jul 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have windows vista. epson stylus cx4200 will print but does not scan. installed windows 7 64 bit drivers but not successful. need help. thanks


Download & install the "Epson Stylus CX4200 All-in-One Printer" @ Drivers and Utilities Combo Package

Windows 7 64-bit compatible, Windows Vista 64-bit
epson13071.exe - 20.9MB
- posted on 07/07/09

This file contains everything you need to use your Epson Stylus CX4200 with Windows Vista 64-bit.
This package consists of the following items:
•Printer Driver v6.5
•Scanner Driver v3.04
•Epson Status Monitor 3
•Epson EasyPrint v3.10

Uninstall your previously installed AIO drivers before installing the downloaded installer.

Hope it helps.

Jun 02, 2011 | Epson Stylus CX4200 All-In-One InkJet...

1 Answer

How can I share my HP officejet 5610 all in one printer that is connected to my desktop that has windows XP with my windows vista laptop?


1. Unplug your USB cable from the back of the Windows XP PC and plug the USB cable directly into your Windows Vista PC.
2. The Windows Vista drivers for your printer should be automatically loaded and your printer will be installed on your Windows Vista PC. If this was successful, skip right to step 3.
If step 2 is not successful

i. Download the Windows Vista printer driver for your printer from
the manufacturers website.

1. If your printers manufacturer has not created a Vista driver
yet, retry step 2.

ii. Install the driver on your Windows Vista PC. During
installation, youll be prompted to connect the printer to your PC.
Choose the option to proceed with installation without connecting the printer.

3. After installation is complete, open the Printers icon in the Windows Vista Control Panel.
4. Right-click on your printer that was just installed and choose Properties.
5. Navigate to the Ports tab.
6. Click Add Port, then select Local Port, then click New Port.
7. For the Port Name, enter the exact network path and share name of your printer. (ex. - \\HOMEPC\Printer2) 8. Click OK and make sure that this new port is selected with a check in the checkbox.
9. Click Apply and then OK to close the printer properties.
10. You should now be able to print from your Windows Vista PC to a shared printer located on your Windows XP PC.

Jun 17, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

HP laserjet 4L will not print from Windows Vista


http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25486&taskId=115
Here is all the documentation that I could locate reguarding this issue. I don't see a driver for Vista....however you should be able to install or run in compatibility mode.

Sep 23, 2009 | HP LaserJet 4L Printer

2 Answers

When i install the printer driver on windows vista is not working


there is a problem on working with software in windows vista. .
try to install the windows XP

Jul 25, 2009 | HP LaserJet P2015 Printer

1 Answer

Cannot install my lexmark printer z640 in windows vista


go to the lexmark website and download the driver for some odd reason the disk doesnt seem to work properly with vista

Mar 24, 2009 | Lexmark Z640 InkJet Printer

1 Answer

Problems with HP deskjet f380. Will not print... scans and copies


the system for vista and xp is near to similar. so just click the following links 1 by 1 and go through the instructions as you r missing any minor step to be followed in loading your printer How to load a printer on a pc step by step instructions
http://freepctech.com/pc/xp/xp00168.shtml
How to load a printer on a pc step by step instructions
http://kb.iu.edu/data/aksl.html
Installing a printer on a Windows 95/98 network
INSTALL THE PRINTER on a PC
ENABLE PRINTER SHARING
MARK the NEW PRINTER as a "Sharable" Printer
INSTALL THE PRINTER ON THE OTHER PCs
Troubleshooting Windows 95/98 networking problems
 
http://www.mcgill.ca/ncs/products/soho/networking/printer/
 
How to install a printer driver locally for a remote printer in Windows XP/ Windows 2000-
http://support.microsoft.com/kb/282842

Jan 06, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Cannot connect my printer to my computer


This came right off of the lexmart site

Attention Windows Vista Users: Attention Windows Vista Users
If you have installed your printer on your PC using an original Lexmark Driver CD that came with your product and you are experiencing problems when printing, you may have installed the Windows XP driver.

Follow these steps to resolve:
· Disconnect your USB cable from your printer.
· Uninstall all Lexmark printer drivers on your PC.
· Download the correct Vista driver for your model.
· Install the driver on your PC.

Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.

Nov 16, 2008 | Lexmark X3470 All-In-One InkJet Printer

1 Answer

Lexmark Z735 InkJet Printer


click here to download vista version:
  • Download the above software.
  • Un-install your previous deriver.
  • Turn off your PC.
  • Remove all connection of printer from system.
  • Install new downloaded driver.
  • Don't connect the printer to PC untill setup says to connect or setup finished.

Thanks
Iqbal

Apr 29, 2008 | Lexmark Z735 InkJet Printer

6 Answers

Lexmark z11 Vista Compatible?


Looks like I've cracked it [Touches wooden desk]. Need a USB to IEEE 1284 36-pin Parallel Printer Cable, like the one I received today (ordered yesterday from www.cables2u.co.uk). First, connect it to Z11. Turn on Z11 and boot up Vista PC/laptop. (I run Vista Business on my laptop.) Connect cable to computer. Message appears "Installing device driver software". Click it for status. 'Found New Hardware' box appears. Click 'Locate and install driver software'. A message appears "Error loading LXADSUI.DLL. Specified module could not be found". Click 'OK'. Message appears saying driver software installed successfully. ["Yeah, right ..."] (Have faith, folks!) Now, click Start, then Control Panel and double-click Printers. Right click on Z11 and click on Set As Default Printer. Right click on Z11 again and click on Properties. Check on Ports tab that Port USB is ticked for Z11. On Cartridge Maintenance tab, check right cartridge is showing. If not, click 'Install/Change Cartridge' and follow instructions. Then 'Clean Print Nozzles' and 'Align Cartridges'. Check settings on the other tabs in Properties look OK and try printing a test page! It looks good to me!

Jan 15, 2008 | Lexmark JetPrinter Z11 InkJet Color...

2 Answers

Can't gt it to work


Are you by chance trying to print in "Fast Normal" mode? The pre-installed Vista driver for the HP PSC series is definitely buggy, but I've had success in many programs that wouldn't print at first by sticking to Fast, Normal, and Best print modes in the "Print Properties" window. Also, don't attempt to install the software from the disc that came with the printer if you're using Vista. The software isn't compatible with Vista and will wreak havoc on your system.

You can also go to your device manager and uninstall the driver, then go to Windows Update to try and get the most recent version through the Windows website. Good Luck.

Oct 12, 2007 | HP PSC 2175 All-In-One InkJet Printer

Not finding what you are looking for?
HP Officejet 6310 All-In-One InkJet Printer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...