Hello! i can't find my book and one day i turn my camera on and this message is there.... ugh no fix. well i read your advise on here and it worked!!! i smacked the camera the first time it didn't work so i tried it again and its gone!!!!!!! lol i can't believe it. it's only a few months old and our 4th sony camera. they have all been great but had problems. thanks so much.
I have the same problem. my camera is 1 year old and I opened it to use it and all the sudden I have this message and the focus seems locked in 1 location so it can't focus on any other distance and the shots are blurry. Help!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The manual is very simple in this case, it says:
The Camera Shake unit may be malfunctioning. If the same message appears after you turn power back on, contact your retailer or a Casio service centre.
So if you need the stabilisation (low shutter speeds, you have to go to the repair shop, to let it fix.
Try switching off the camera, remove the battery for a few minutes and then place the battery back.
Still the same error? you know what to do. Sorry.
SD Memory Cards have a write-protect switch to prevent image data from being deleted. By sliding the switch to the bottom of the card, the data will be protected. images cannot be recorded when the card is protected. If an attempt is made to record or delete an image with the camera, the card-locked message will appear on the monitor.
The ERR message is not a good thing. Read page 132 of the D80 Manual. Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689.
I checked the book, this means a camera malfunction that you cant reverse, but they say using the reset on the bottom of the camera will fix, this is a tiny hole under the lens area, you have to push in with a pin, this erases all settings, will have to reset day date ect. Hope this helps, margaret
You have whats known as the GBLOD " Green Blinking light of DEATH! BUT its curable, and usually FREE by NIKON. You must contact your nearest NIKON WARRANTY REPAIR, ( This is a reapir that is never out of warranty time ) advise them of your model number, be ready to give the serial number of your camera and in most cases they will advise when and where to repair it, usually free. It was a NIKON Manufacturing defect in a series of earlier production cameras. It seems that the card slot poins where compressed and not soldered onto the pins in the camera.. NIKON usually gives you a repair number and instructions as to where to send the camera. I had that problem and it was fixed in 3 weeks and cost me NOTHING... they even paid for the shipping back and forth.. Good luck, my email is email@example.com let me know how you made out.
Hank in Regina Canada