At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The convergence is out of alignment, the problem is caused by bad convergence ic's not working properly. The ic's must be replaced and the system calibrated, suggest a professional.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if its the lamp indicator flashing its an issue with the lamp. If the lamp is new I would double check to see if its making contact completely when its slid in often the pins can get bent slightly. If it were the ballast the power indicator would blink 5 times.
You should have a TV repairman look at your set to see if you have a bad tube in the set, It might just be a convergence ishue, if thats the case it might be worth fixing.
Hi,
Your tv requires replacement of STK393-110 as it creates convergence problem and its availableParts Store here. If you want to do the job at your own, you need to know good soldering skills or get service of nearest TV repair shop.
Hi you have bad convergence ic stk modules ,Cost for repair center to fix is 250.00. call your local repair center ask there prices on convergence ic repair. It is a very common problem every 3 to 5 years .Our service center does a lot of these.
Could be a problem with the convergence IC's or a resistor(s) / capacitor(s) around the IC's. I suggest calling a service guy and getting the TV fixed.
your tv is having convergence problems if you can't adjust it out with the customercontrols you probably will have to have the convergence circuit repaired witch should cost about $300
×