How do I get the language back to English on my Canon Power Shot sd3500. I mistakingly chose a language that I have no knowledge I can't understand the instructions on the camera. I followed the instructions in the book supplied with the camera but I can't get to the language page. I hope I explained myself clearly. Thank you Margaret

Press the playback button (right-pointing triangle). Touch and hold MENU (the button at the bottom right of the screen). Touch "English" and then the curving arrow in the top right of the screen.

If you need a manual, you can download one at
http://gdlp01.c-wss.com/gds/7/0300003267/01/PSSD3500IS_IXUS210IS_CUG_EN.pdf
The language instructions are on page 21.

try uninstalling and install again making sure "english" is checked off (on) i would say open up their help task bar but if it is in another language that wont help..unless you run google language alongside and translate thru that to get started

The IXUS 210 is called the SD3500 in some parts of the world. You can download the English manual for the SD3500 (and more) from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/
powershot_sd_series/powershot_sd3500_is#BrochuresAndManuals

The IXY 10S is called the SD3500 IS in some parts of the world. You can download the SD3500 IS manual (and more) from the manufacturer's web site at
http://www.usa.canon.com/cusa/consumer/products/cameras/digital_cameras/powershot_sd3500_is#BrochuresAndManuals

reinstall the drivers, go to canon.com and download driver in english and install it.

Press the power button. Set the mode switch to playback (the right-pointing triangle). Hold down the FUNC/SET button and press the MENU button. Use the arrows to select a language. Press the FUNC/SET button.

Press the power button. Set the mode switch to playback (the right-pointing triangle). Hold down the FUNC/SET button and press the MENU button. Use the cursor keys to select a language. Press the FUNC/SET button.

follow the menu numbers in upper right part in english, upper left in arabic. to go to language settings to english go to Settings#7, then Phone#11, then laguage setting #1, then Phone Laguage#1, then choose the language pack #1 is usually automatic that why maybe it chose arabic depending on your region. English is usually #2.

Is the program you are printing from in english.
Do a test page from Vista and see what language appears.

You go to the settings menu. It's inbetween the picture of the camera and the microphone on the start menu. When you open that, the language option is the fifth one.

I hope that helps!