Question about Printers & Copiers

Open Question

Hp photosmart 8200 series displays ERROR OXc 18a 030a Fault on ink

Posted by on

  • gjbaren Aug 04, 2008

    I have the same problem

×

4 Suggested Answers

nitinbabbar
  • 55 Answers

SOURCE: HP printer hp D7163 error:OXC 18a 0205

this is beacuse of 2 reasons
1)printer internal firmware corrupt
2)ink system failure

try this

  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer

Posted on Jan 28, 2008

  • 1 Answer

SOURCE: Error HP Photosmart 3310. No strart print, no scanning...

I have a Photosmart C6180 all in one and get an error message 0xc18a0101 Ink System has failed. Unable to copy, receive faxes or print. Refer to printer documentation. Error: 0xc18a101.

I put new cartridges in and tried to recalibrate as mentioned by someone on the board. Can anyone help, please?

Posted on Feb 20, 2008

  • 1 Answer

SOURCE: 3110 is displaying message that

Contacted supplier. Warranty provides replacement proudt

Posted on Aug 08, 2008

  • 1382 Answers

SOURCE: error code Oxc 18a 0007 appears and can not print

Hi,

The "Ox18" series errors can be removed by resetting the printer. Unplug the USB cable from the printer, remove the ink cartridges. When the "Insert ink cartridges" message appears unplug the power cord from the printer. Wait 1 minute (at least), then reconnect the power cord and turn on the printer if it didn't come on by itself. Reinsert the ink, close the unit and print a calibration page if prompted to do so. Finally reconnect the USB cable to the printer. If this doesn't work, the unit needs service (or replacement if the service call will cost more than a new printer).

Thank you!!

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Oxc 18a 0207


Hi
Please click on the following link to resolve the issue
This is a particular issue when the printing system of the printer goes bad

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&cc=us&lc=en&dlc=en&product=1153754&tmp_track_link=ot_search

Hope it works for you..
All the best

Oct 28, 2010 | HP Photosmart C7180 All-In-One InkJet...

1 Answer

My HP Photosmart C5180 all in one is displaying this error Ink system has failed refer to printer documentation OXC 19a 0035 cannot find out what it means?


Hello,

The "Ink System Failure" is caused by air in the ink feed tubes. This problem can happen if you allow your ink to run all the way out or if you use poorly refilled ink cartridges that have air bubbles in them. To clear the error you will need to perform a purge on the printer. We have a step by step guide to this procedure posted on our web site at: http://www.ccl-la.com/blog/index.php/category/printer-repair/hp-printer-repair/ This should get you back printing in about 10 minutes.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Jun 19, 2010 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Error code Oxc 18a 0007 appears and can not print


Hi,

The "Ox18" series errors can be removed by resetting the printer. Unplug the USB cable from the printer, remove the ink cartridges. When the "Insert ink cartridges" message appears unplug the power cord from the printer. Wait 1 minute (at least), then reconnect the power cord and turn on the printer if it didn't come on by itself. Reinsert the ink, close the unit and print a calibration page if prompted to do so. Finally reconnect the USB cable to the printer. If this doesn't work, the unit needs service (or replacement if the service call will cost more than a new printer).

Thank you!!

May 19, 2010 | HP Photosmart 3210 Printer

1 Answer

Hp printer error oxc a8a0201


Hello,

The 'ink system failure' error is caused by air in the ink feed tubes. This happens if you use poorly filled refilled cartridges or you let the cartridge run all the way to empty and the printer sucks air into the system. You will need to purge the air lines to correct the error. We have a step by step guide to do this in an article posted on our services page at: http://www.ccl-la.com/blog/index.php/category/printer-repair/hp-printer-repair/ You should be back up and printing in about 10 minutes.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Apr 15, 2010 | HP Photosmart C7180 All-In-One InkJet...

6 Answers

Error HP Photosmart 3310. No strart print, no scanning...


I have a Photosmart C6180 all in one and get an error message 0xc18a0101 Ink System has failed. Unable to copy, receive faxes or print. Refer to printer documentation. Error: 0xc18a101.

I put new cartridges in and tried to recalibrate as mentioned by someone on the board. Can anyone help, please?

Nov 16, 2007 | HP Photosmart 3310 Printer

1 Answer

HP printer hp D7163 error:OXC 18a 0205


this is beacuse of 2 reasons
1)printer internal firmware corrupt
2)ink system failure

try this
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer

Oct 25, 2007 | HP Photosmart C7180 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...