Question about Video Game Consoles

Open Question

Need to get hold of Nora Riad from xbox support in swindon

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My xbox turns but the image docent pop out


To reset Xbox 360 console display settings
  1. If there is a disc in the console, remove it.
  2. Turn off the console.
  3. Turn on the console by using your controller. To do this, press and hold the controller's Xbox Guide button until your console turns on.

    Note If multiple controllers are connected to your console, make sure that you use the player one controller.

  4. While the console is starting, press and hold the Y button and pull the right trigger at the same time. Continue holding the buttons when you see the Xbox 360 logo.
  5. The console will restart and you will see the Xbox 360 logo again.
    The console's display settings are now reset to the defaults.

May 21, 2011 | Microsoft Xbox 360 Console

1 Answer

No video have sound when using component connection on my xbox 360 hdmi ok. help


Your resolution settings on the xbox are too high for your currently used cables or tv. To reset your console's resolution follow these steps: To reset Xbox 360 console display settings
  1. If there is a disc in the console, remove it.
  2. Turn off the console.
  3. Turn on the console by using your controller (its best to have the controller plugged into the console rather than just using the wireless). To do this, press and hold the controller's Xbox Guide button until your console turns on.
  4. While the console is starting, press and hold the Y button and pull the right trigger at the same time. Continue holding the buttons when you see the Xbox 360 logo.
  5. The console will restart and you will see the Xbox 360 logo again.
    The console's display settings are now reset to the defaults.

Mar 12, 2011 | Microsoft Xbox 360 Console

1 Answer

WHAT IS AN XBOX 360 HARD DRIVE?


it is the thing that holds all your accounts and info and achevments and every thing saved to the xbox it is attached to the top of the exbbox 360 and you need one to have a account of the xbox 360

Jan 23, 2011 | Microsoft Xbox 360 Console

1 Answer

The second wireless controller for my XBOX 360 isn't getting picked up by the machine. What do I need to do?


I assume this is the one you bought separate. Well the problem is that you need to sync it. To sync it First you must Press and hold the tiny button in the front of the xbox next to the sd card slots for about 2 seconds. Then look at your controller and on the top of the controller next to the battery pack there is a tiny button similar to the one on the xbox. Press and hold until it flashes. then your controller should work.

please rate.

Dec 31, 2010 | Microsoft Xbox 360 Wireless Controller

1 Answer

Cant play with controller on an other xbox


THERES A LITTLE SYNCRONISING BUTTON ON CONTROLLER YOU NEED TO PRESS THAT IN AND THE SYNC BUTTON IN THE MIDDLE OF CONTROLLER HOLD DOWN A GREEN RING WILL FLASH TILL IT HAS SYNCRONISED IF YOU LOOK IN A MANUAL IT SHOULD SHOW YOU WHERE SYNC BUTTON IS . IF WIRED CONTROLLER JUST HOLD MIDDLE SYNC

Jun 20, 2010 | Microsoft Xbox 360 Console

1 Answer

When i put my hard drive in it stays at the xbox 360 start up screen (xbox globe) and it stays there for a wile then wen it loads up it says that my hard drive is connected i thought it was the xbox and...


Try this when you have the xbox off hold the white sync button on the controller itself while holding the sync button press the center x box button to power on the xbox do not let go of the sync button until the xbox boots up it should take care of the bad install which it sounds like you have

Mar 30, 2010 | Microsoft Xbox 360 Hard Drive (20GB)

2 Answers

Just updated xbox 360 and now all i get is the xbox 360 screen


try unpluging the power cable from the xbox and the wall then take off your harddrive for 30 secs reattach everything hold down the sync button on the xbox2_bing.gif and while holding that down press the power button, release the sync button after 30secs or until you boot up to the avatar, if this dont work check what colour light is on your power brick when you press the power button on? hope this helps?

Jan 27, 2010 | Microsoft Xbox 360 Console

1 Answer

Update failed xbox 360


Simply hold down the sync button before turning on the console. Continue to hold the sync button until the console boots to dashboard completely. This will clear any failed updates. If you still have this issue after performing this you will more than likely need to send your console in for repair.

Dec 23, 2009 | Microsoft Xbox 360 Console

1 Answer

My xbox wont show a picture but it has sound


ur xbox is in hd mode.to get it out of it turn ur xbox 360 on with remote than hold ( Y ) and the R trigger together and wait and see if it turns on and if it doesnt ull need a new connection for ur tv

Jul 08, 2009 | Microsoft Xbox 360 Console

2 Answers

Help with xbox 360


try pressing and holding the bluetooth button on your 360 while doing this turn your xbox on and keep holding until it boots completely even if it does not make it to the boot screen just keep holding it until you think the time would have passed for it to boot up. power off your xbox. wait about 5 minutes and then reboot believe me this little method fixes alot of the xbox problems so it makes me wonder if some of the error codes are really correct. one more thing i strongly recommend the use of a cooling device for the 360 which ever one you choose

May 07, 2007 | Microsoft Xbox 360 Console

Not finding what you are looking for?
Video Game Consoles Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Video Game Consoles Experts

Iron
Iron

Level 3 Expert

3018 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...