Pages are skipping plz solve

Depends on the code needed, I configure CMX boards in-house and ship them out all the time. Just need a config from your printer in order to match it up. [email protected]

in same way as well as generic printer installed on pc

1. copy file name lpt1 (parallel) 2. copy file name com1 (serial)

If I'm not mistaken, the manual can be found at this link

http://www.printronix.com/products/productmanuals.aspx?id=4108

Please rate if you find this helpful, thanks

Open the printers window from the control panel and right click on the printer icon and select properties..
ON the properties window , click on advancd tab, select the option as print directly to printer and click on apply and the n click on ok ...
Try to print and see the speed ... .

If someone taps the advance button instead of holding it down it resets. The solution was to reboot the printer..

If you are using a printer that has IGP enabled, you can set the printer to automatically go to the next TOF at the end of the print job. Only if you are using the Graphics portion (printing bar codes and graphics). The option is "Auto FF at ^PN" and you would Enable it.

u need to chek pritner data cable also chek pritner setting as well as systemsetting

Purchase and install a wireless print server.

Lazertek

Purchase and install a wireless print server - available from many manufacturers.

Steve W
LazerTek LLC