- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think this is a Windows 98 forum. If so, I may have a solution.
Download and install this free (Generic Storage USB Device) driver named "wtgenusb-zip" from DriverGuide.com. Register with DriverGuide.com for free membership. Use their search tools using keywords like "Window 98", "USB", "Storage" and look for "wtgenusb-zip".
It's a rediculously small file to download, only 11Kb. The "zip" file must be extracted which can be done on any computer running Windows XP, then copy the files over on a floppy disk. However extracting it on a computer running Windows 98 will require a seperate program like "Winzip" or "Pkunzip" (for DOS).
Copy the extracted files to any folder of your choice on your Win98 machine. Use the "Install Hardware Wizard" to navigate to that folder to install the driver to enable your USB storage device.
WTGENUSB worked great for me, permitting my Win98 to access my USB Flash drives, 250Gb Portable hard drive, and Digital Camera card reader. Good luck.
Follow these steps to resolve: · Disconnect your USB cable from your printer. · Uninstall all Lexmark printer drivers on your PC. · Download the correct Vista driver for your model. · Install the driver on your PC.
Important - Do not reconnect the USB cable until the install software prompts the question of how the printer is connected.
you will need the usb port drivers for windows 98 and the usb drivers for the printer as the earlier windows 98 had'nt the usb drivers included with operating system an as the new motherboards came about with usb ports then a new in 98 was needed to catter for this that's why you have win 98 first edition and win 98 se edition please chech that you have the driuvers installed for both parts to work.
Just follow the following steps:
1) Locate the USB port of your Nokia N72 phone. See Manual if needed.
2) If your mobile phone has a USB Data Cable supplied, connect the end that matches the hub while connect the USB end to your USB port of your PC.
3) If your mobile phone has a CD supplied, this contain the PCSuite software bundled with drivers for your PC operating system.
4) Insert the CD to your CDRom drive.
5) After step 4, you will see a window saying install PCSuite then choose Yes.
6) Choose which operating system. If you use Windows 98, then choose the driver for Windows 98.
7) After installation, reboot/restart tour PC to complete the setup process but never disconnect yet your USB Cables from your mobile phone to PC.
8) Once restarted click on the icon of the PCSuite on your PC, then check if your PC can communicate with your mobile phone and vice versa. To do this click connect via USB if the datas in your mobile phone is seen then connection is correct.
If your problem is USB Driver for Windows 98, i suggest you upgrade your PC operating system to Windows 2000 or Windows XP. Old operating platforms have driver problems when new devices are attached to. But if you choose Windows 98, you will have to browse the internet in search of drivers. Just let me know if you have not found a driver. I'll assist you with this.