Question about Microsoft Xbox 360 Console

2 Answers

Disc Tray Problem

Okay, my disc tray only stays open for 8 seconds, then closes, regardless if your still putting in a disc. and it also does it if it is nudged even a tiny bit. and while its open, the power light continuously flashes, whereas my brother's and friends's xbox(s) stays open until pressed again, and does not flash.... is there a problem with my xbox? how can i solve this?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Infact CA92793 That is Not Correct...

Dont say it is. Because its NOT.

The Disc tray on xbox360's Stay Open for unlimited time UNtill the User Press the button again. I have a Xbox360 elite and I pressed my disc tray to put in my Battlefield : Bad company.
and i went to the toilet before i put it in. came back and it was still open and i was gone for more than two minutes.

So explain that? and no its not broken. because my mates is the same when i go round his house.

Got a solution for that *****? Nope. I didnt think so.

Posted on Jul 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

That is how the X-Box works. It doesn't stay open, because if it stood open and it accidently dropped or anything, the drawer would break, and that would cause alot of problems with Microsoft. Thanks for using Fixya!

Posted on Jul 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tray won't close


Use the following steps to close the disc tray on an original Xbox 360 console.
Step 1: Remove the disc from the tray Step 2: Make sure the faceplate is on correctly
The faceplate is the plastic piece on the front of your console.
  • Press firmly around the edges of your faceplate to snap it into place (make sure it is flush with the rest of the console). If the faceplate is not on correctly, the disc tray won't close.
  • If you find that the faceplate is the problem, please contact Xbox Support to order a replacement faceplate.
If this does not resolve your issue, please try step 3. Step 3: Press the eject buttonTry closing the disc tray by pressing the eject button. If the disc tray successfully closes, open the tray and insert a disc. Now try opening and closing the tray with a disc in the tray.
Note Make sure that the disc isn't sticky and doesn't have any labels that could prevent the tray from closing.
If your disc drive still will not close, please try step 4. Step 4: Move the disc drive tray
  1. Gently move the tray up and down, and then from side to side.
  2. Press the eject button on your Xbox 360 console.If your disc drive still will not close, you need to have your console repaired.
  3. Step 5: Request a repair If the disc tray still won't close properly, your Xbox 360 console needs to be repaired.


Xbox 360 S consoleUse the following steps to close the disc tray on an Xbox 360 S console. Step 1: Remove disc from the trayIf there is a disc in the disc tray, remove the disc. Step 2: Press the eject buttonTry closing the disc tray by pressing the eject button. If the disc tray closes successfully, open the tray and insert a disc. Now, try opening and closing the tray with a disc in the tray.

Note Make sure that the disc isn't sticky and doesn't have any labels that could prevent the tray from closing.

stickerdisc.jpg

If the disc tray still will not close, please try step 3. Step 3: Move the disc drive tray
  1. Gently move the tray up and down, and then from side to side.
  2. Press the eject button on your Xbox S 360 console.

If the disc tray still will not close, you need to have your console repaired. Step 4: Request a repairIf the disc tray will not close, you need to have your console repaired.

Dec 16, 2010 | Microsoft Xbox 360 Console

1 Answer

Hi, the dvd on my recorder stayes ejected? It will close but then will eject straight away? What can I do? Cheers.


Hello,

The fault is not from the disc, it is from the player.

The disc tray is actually malfunctioning. Which is as a result of a fault on the mechanism that is controlling the opening and closing of the disc tray.

Another fault might be that the button that controls the disc tray might be stuck.

test if it is the button.
  1. Unplug the player from the power source,
  2. plug it back,
  3. turn it on,
if it opens without you pressing the open button, then the fault is from the button.

check it for any irregularity.

  1. get the appropriate screwdriver,
  2. open the cover of the player,
  3. carefully force the front control panel open from the sides,
  4. then check for any damages,
  5. change the open button and it will be okay again.
test if it is the disc tray
press the open button, if it opens closes continuously.
then there is a problem with the mechanism that controls the open and close of the disc tray.

to fix this,

  1. Get the appropriate screwdriver,
  2. open the back cover of the player,
  3. look to the left side of the player and you will see a mechanism that controls the tray,
  4. change the mechanism with a new one.
after doing that, the player will be in good condition again.

take care



Jun 18, 2010 | LG RH1777 DVD Recorder

3 Answers

How do I enable this player to become multi-region? I believe it's based on a Pioneer rather than one of Teac's own designs.



Hi

Thanks for using FixYa. To make it multiregional please follow these step by step instructions using your remote control:


1. Switch power on

2. Open the DVD tray (leave it open with no DVD in it)
3. Press "stop"
4. Press "734466"
5. Use cursor to scroll up or down until it says "Region 0"
6. Press "OK/Enter"
7. Switch power off
8. Switch power on



It show now play all region DVD’s. Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Jan 30, 2010 | Teac DV-H500 DVD Player

1 Answer

Xbox 360 disk tray wont stay shut


My 360 is/was having a similar problem...my 360 would say "reading disc" then "open tray". Well since my system is only about 8 months old...I opted to send it in for repair. Its under warranty. My system is in route to be fixed as we speak. I would advise you to get yours registered too.

May 28, 2009 | Microsoft Xbox 360 Console

1 Answer

READING DISC OPEN TRAY!!!!


I took a small coffee straw and put some liquid silicone in it and stuck it through the front disc tray carefully to the small engine in the back. Hold your finger over the back of the straw so that the liquid stays in until you are over the engine top.Then I put in a disc cleaning disc for about 10 sec and then put in saints row 2 and it hasn't said "open tray" for about two weeks and counting.....

Mar 28, 2009 | Microsoft Xbox 360 Console

11 Answers

I would like to change regions on my portable Durabrand DVD player model PDV-722


Alright, just follow these steps and let me know if you have any problems or questions

  1. Power and switch on the Durabrand DVD player.
  2. Open the DVD disc tray tray or lid.
  3. Press Stop.
  4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
  5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control
  6. Press OK.
  7. Close the disc tray and press Standby on the DVD player front

Dec 19, 2008 | Televison & Video

1 Answer

Disk tray won't stay closed


i have same problem with mine, if i close the tray quickly by hand after it re-opens,it usually starts reading the disc

Jun 14, 2008 | Microsoft Xbox 360 Console

1 Answer

Disc tray problems


Redeem your warranty, this issue happens with the tray is going bad, first this small problem next reading problems

May 19, 2008 | Microsoft Xbox 360 Console

2 Answers

Disc tray won't close!


i know this sounds carzy but mine just did that and i pushed it in hard but not too hard and then tried opened it and when i hit the close button it worked

Oct 27, 2007 | Microsoft Xbox 360 Console

2 Answers

Sanyo 6100 dvd player-disc tray automatically opens whenever power is on.


you should try inspecting & servicing the tray transport mech first and then the tray sense swt.

Dec 08, 2006 | Sanyo DVW-6100 DVD Player/VCR

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Mike Neath
Mike Neath

Level 3 Expert

315 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...