Question about Vacuums

1 Answer

I have a hover f5913-900 steamvac that will not start & run ?

Posted by on

1 Answer

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=768773
Generic problem for all Vacuums
I have a Hoover F5913-900
Posted by rea1953 on Jul 11, 2008
I have a Hoover F5913-900 SteamVac that will not start & amp; run?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. It sounds to me that you may have a bad switch and it should be replaced and the cost is not that expensive, or the worst scenario would be that the motor is gone and needs replacement or both. Please feel free to contact your local vacuum cleaner dealer in your area or to go the Hoover website or contact the Hoover factory cust serv listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jul 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hover F5915100 the spinScub will not turn


this video will show you the problem and how to fix

Oct 17, 2012 | Hoover Vacuum. SteamVac Spin Scrub...

1 Answer

We need a user manual/directions for a f5905-900 hover steam vac clean surge.


Hi There,

Unfortunately the Hoover F5905-900 is a little outdated, and Hoover doesn't have that model on their site. They do however have the Hoover F5906-900 instruction manual which I linked below. This model is identical to yours, and will explain all that you need to know.

If it's parts that you are looking for, here's a link to the parts for the Hoover SteamVac on our website:
Hoover SteamVac Parts & Accessories

If it's something else that you need help with, please don't hesitate to add a comment on this page with your question/concern and I'd be more then happy to help you out.

Here's the link to the owners manual:
Hoover SteamVac F5900 Series Owners Manual

If this answered your question, please be sure to rate the repair helpful, or leave feedback for me, this is greatly appreciated by the Fixya community. Thanks again!

Chris Jones
GoVacuum.com

Jun 09, 2010 | Hoover F5906-900 Upright Steam Vacuum

1 Answer

Where is the STEAM in the Hover SteamVac F5914-900??


There is none kind of false advertising it does not even heat the water. You just put hot water and shampoo and go.

Dec 15, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

The scrub brushes dont spin anymore


The brushes are turning by an air driven turbine. The turbine has a pivot bushing made of steel inside of it that gets rusty because of the water that is running through it. The turbine gear will have to be replaced. You can access the turbine gear by removing the hood. You can find a genuine hoover replacement part by following the link below. Just find the model number of your Steamvac.

http://www.usavacuum.com/Hoover-SteamVac-Parts-s/105.htm

Oct 23, 2009 | Hoover F7425-900 SteamVac V2 Widepath...

2 Answers

Hover steam vac Model #F5897-900


When I use my Hover Steam Vac, it smells like rubber is burning. How do I fix this?

Jun 16, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Need to know how to use hand tool...need manual.


Manuals at www.hover.com. You'll need the model number which is located on the back of your machine.

May 01, 2009 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

Need a instructions manual


you can download your manual --->here<---

please take the time to give this solution a fix ya rating

clarkco

Feb 16, 2009 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Need manual for hover spinscrub steamvac dual V F7222-900


Most Hoovwer manuals are available to download at www.Hoover.com You just need your model number.

Aug 22, 2008 | Hoover SteamVac Carpet/Upholstery Deep...

1 Answer

Hover steam vacume F5864


Is it running out of the bottom of the tank, or at the bottom of the machine. If at the bottom, you have a water line off. If at the bottom of the tank, there is a water seal that the tank sits on, may have to replace that.

Oct 03, 2007 | Hoover SteamVac F5914-900 SpinScrub...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...