Question about Sakar Crayola EZ Grip Digital Camera

1 Answer

Xp Installation disk Have Vista...

I have Vista and the installation disk for my sons Crayola digital camera came with a xp installation disk. How do I get the get it to work? Are there drivers installations for vista, do I have to request a Vista copy?

Posted by on

  • applenext4me Jul 11, 2008

    My son received the same Crayola camera as a gift about a year ago. I have never been able to get the software to work on my Windows Vista computer, despite many attempts and emails with technical support. Some of the technical support people have told me that it not supported on Vista, while others have attempted to direct me to drivers that they said would work, but didn't. It sits gathering dust...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I did some more searching, and discovered that apparently Sakar produced a Vista driver for this camera shortly after I gave up on it last year. (Their support staff said they would notify me if a Vista driver became available, but oh well.)

In any case, there is now a Vista driver for the Crayola camera available on the Sakar website:
http://www.sakar.com/p-203.aspx

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have bought a samsung ES25 from a sechondhand store and it doesnt have a installation disk with it i have a personal computor so im unable to use the SD card how do i get a installation disk?


Hi Renae,
First,you need to know your computers Operating System[Windows 7,Windows Vista,Windows XP etc].Since the camera's drivers are notyet available on the Samsung Support sites for downloads,you may have to purchase the installation disks from their outlets.Just remember your Operating System so they can provide you with the corresponding drivers.Here's the camera's user guide for detailed instructions on operations.

Hope this helps.
Thanks alot for the purchase!

Dec 09, 2011 | Digital Cameras

1 Answer

LOST CAMERA DESK


You don't need any installation disks with xp spk3, just plug usb cable to a usb port on pc, xp will detect mass storage device and will assign drive letter. Go to my computer and open camera drive letter and copy pictures to local folders. Or you can remove SD card and read with SD card reader. Specs and support Link: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=145&modelid=14117

Nov 22, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

GOT A NEW LAPTOP WITH VISTA. OLD XP INSTALLATION DISK DOES NOT WORK. ARE THERE ANY DRIVERS FOR VISTA AVAILABLE?


Most cameras will work with Vista with built in drivers, just plug the camera usb cable into the computer. You should be able to see the camera under "Computer".

Aug 26, 2009 | Digital Cameras

1 Answer

The soft ware up date


I don't have enough information on your problem, to give you an intelligent answer, but if you are like me, and had purchased the camera with the original CD1 and CD2 disks, like I did back in 2001, the year when Agfa discontinued supporting their digital cameras and flatbed scanners, my CL18 was just about 1/2 off the normal price, and I figure that's why it was on sale, no support for it anymore, so the driver for WIN95/98/OSR2/WIN-XP was the last driver available, and I "suspect" that you're talking about the installation process, and if that's so, maybe I can help out.
I used the CL18 on a computer that came with WIN-XP Media Center Edition 2002, but this computer, which I bought after the other computer died on me, had WIN-Vista on it, so in order to use the CL18 digital camera to import pictures to the computer, I needed to remove WIN-Vista, which I kept on a set of Recovery disks, in case I ever want to put that back unto the computer, and I had purchased WIN-XP with Service Pack 1 on it back in 2002 I think it was, so I put WIN-XP on this computer, but I needed to download WIN-XP drivers for my computer hardware first, otherwise I may not have been able to access the Internet after installing WIN-XP to download drivers afterwards...at least the modem or DSL Cable/Modem drivers, and motherboard drivers, maybe the sound drivers and video drivers, etc. Get copies of them first for the computer that you're removing WIN-Vista from before installing WIN-XP...Maybe placing the drivers onto a CD or DVD maybe, or another hard drive, like I did with my external hard drive, which WIN-XP will "see," but WIN95 couldn't see.

When I ran the installation process with the CD that came with the CL18 camera, I saw the message where it stated that it was updating DCOM95, and/or that it couldn't update DCOM95, it also stated that the installation failed, or something like that, and if that's what you are talking about, then I'll let you know that all I did was to click on "Allow change," or whatever the message shows, but that was in the Spybot software, so if you run or use Spybot, and have the Spybot-SD Resident icon in the system tray, then go ahead and click on "Allow change," or whatever the choice is, then click on the message you see from the CL18 installation disk and let the computer reboot with the CL18 installation disk still in the CD/DVD ROM drive. 
The installation should finish ok after the reboot if you kept the CD in the CD-ROM drive.
If you can't import pictures, like using the Corel Photo House 5 software that came with my CL18 camera, then you need to make sure that the Corel Photo House 5 software isn't using your webcam driver for example and you need to choose the Twain Driver in Corel Photo House 5 software before importing pictures. 
In a couple of other posts I say how to get the Corel Photo House software to import pictures. The process of doing it the first time, after the first time, Corel Photo House 5 will use the same driver each time you start the software up, unless you choose another driver to import from another source, like a webcam for example, but basically, do the following for importing pictures:
Start Corel Photo House 5; Click on "Load photos from a digital camera;" Click on "Select source;" Click on "ePhoto CL18 TWAIN Driver [UI];" Click on "Select;" Click on "Proceed"
If the CL18 camera is plugged into the computer and turned on you should be all set to import pictures.
Anyway, the main thing is that "if" you're talking about the setup process in WIN-XP, you'll get the error message that says that it can't update DCOM95, or something like that, and it will say that the installation failed, but just click the choice there and the computer will reboot and the installation should complete, at least it did for me anyway.
One time I did need to reinstall using the Add Hardware way of doing that, and in that process it showed the CL18 driver as an available driver, and choosing that driver on the list of available drivers allowed the re-installation to work, and I needed to do that one time when I couldn't access the pictures in the camera even though the camera had previously been installed.
Hope that helps, Bernie

Nov 09, 2008 | Agfa ePhoto CL18 Digital Camera

1 Answer

I have a R607 Digital Camera that I have been using on my windows XP computer. That computer is not running well anymore, it is getting old. I would like to install the R607 Digital Camera on my Vista...


My father in law had a computer with XP and this exact camera. He had a nice little system. His son bought him a laptop that uses Vista. I found this link so that you will be able to use the R607 camera with the Vista software.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00876298&lc=en&dlc=en&cc=us&lang=en&product=371598

Nov 03, 2008 | HP Digital Cameras

1 Answer

Crayola Digital Camera Installation Disk


Go here, http://www.sakar.com/thumbnails.aspx?categoryid=2, select the camera type you have, and then on the resultant page will be a link to download the drivers.

There is another program on the disc called Color Genie which does not appear to be available for download. It's not required to download pictures off the camera.

Call tech support at 1-877-397-8200 to get a new disc mailed to you.

Sep 01, 2008 | Sakar Crayola EZ Grip Digital Camera

1 Answer

I lost my installation disk in Hurricane Rita and need drivers can you help?


This is a link to the Concord Camera support site. The 642 driver is on the top of the list. Not sure if this is for XP since the release notes are not viewable until you install it. Hopefully this is a fit.

http://www.concord-camera.com/support_drivers.aspx

May 02, 2008 | Concord Camera Eye-Q 642 Digital Camera

2 Answers

Crayola digital camera


I had the same problem. I downloaded the driver from sakar.com and now it works like a dream! Hope this helps.

Jan 18, 2008 | Sakar Crayola EZ Grip Digital Camera

3 Answers

FREE driver installation download



There are to Chameleon XP links on the page the first appears to be the driver (no Vista Driver) and the second are for programmers,

There is a user guide and a setup guide on the far right.

http://www.largan.com.tw/digital/download_en.htm#chameleonXP

Dec 18, 2007 | Largan Chameleon XP Digital Camera

Not finding what you are looking for?
Sakar Crayola EZ Grip Digital Camera Logo

Related Topics:

542 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sakar Digital Cameras Experts

Sanath Kumar V

Level 3 Expert

684 Answers

robertswww

Level 2 Expert

55 Answers

Justice McPherson

Level 1 Expert

6 Answers

Are you a Sakar Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...