Question about Sansui Audio Players & Recorders

Open Question

How do I connect the stereo integrated hi-fi system DA T500 to stereo graphic equalizer SE 510 whilst wanting to utilise a CD player input?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: how do i reset a

push the funtion button till dab bomes up on the screen then push in the info button and it will start to retune dab. for a total reset just push the select button 1 second after you hold the info button for 5 seconds

Posted on Mar 10, 2008

  • 297 Answers

SOURCE: Connect Equalizer to Yamaha receiver

You do this the output cord or RCA cord of your yamaha reciever is to input in your graphic equalizer ,the output of your equalizer is in to the speaker that all .. feel free for asking assistance for further question arises rate as fixya...

Posted on Jun 19, 2008

tech48
  • 624 Answers

SOURCE: i have a 1987 model

First connect all sources like tuner, cassette player, Cd player into the proper RCA inputs of the control amp, then connect the output of the control amp into the input of the equalizer. Then connect the output of the equalizer into the input of the amplifier. This is how to get the best performance and proper outputs to all the right equipment. The speaker outputs of the amplifier would then go to the speakers.

Let me know if you need more help from me by addressing your post to me, or if you wish to communicate with another expert you can address your post to them I.E. @tech48 or @whoever

Thanks and good luck,

Dave

Posted on Sep 27, 2008

dunnbiker
  • 8546 Answers

SOURCE: Graphic equalizer

In general all equalizers, being designed to be in a Tape Monitor loop, have the option to Equalize either the Source or the Tape or nothing. Check for that control and toggle it. My old ADC SS-525X has pushbuttons whose settings (Tape/Source) are not easily determined. I always have to play around with it to know which is selected.

I'm betting your EQ is processing the program that would head out to an attached tape deck.

Posted on May 18, 2009

  • 19 Answers

SOURCE: Can you help me connect my Yamaha hi-fi system? I

Your EQ will be connected to the amp via one of the Tape loops. Connect rec out from the EQ to play in on the A1 Tape input,and rec out from the A1 to play in on the EQ. Then select Tape Monitor on the A1 to hear sound with the EQ settings applied. It won't affect the surround channels,only the main ones. You can also connect the EQ across the pre out and main in sockets for the front channel on the A1

Posted on Jan 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to hook up a 7 band pioneer equalizer great 470 to a Kenwood kr-v6030 receiver


Connecting an Equalizer to a Receiver Before beginning, purchase RCA cables. In order to run the signal from a stereo receiver to the graphic equalizer and then on to the amplifier, two sets of RCA cables are needed. These are basic cables used to connect auxiliary components like record players and CD players. The length of the RCA cables should be about the same length as the distance between the receiver and equalizer.

1. Connect Graphic the Equalizer to the Receiver

The first step in this setup is to connect the graphic equalizer (EQ) to the receiver. Most receivers will have preamp-in and preamp-out connections. Some have tape monitor connections. It's preferable to connect the EQ to the preamp-in or preamp-out because the tape monitor won't allow for connection to the amplifier as well.

2. Connect the RCA Cables

The first set of RCA cables should connect the receiver and equalizer. Connect one pair to the preamp output channels and the other end to the left and right input channels on the EQ. These are on the back side of the equalizer. Usually, the colors will correspond to the RCA plugs. That means connect the red plug to the red jack and the white plug to the white jack. Then connect the second pair of RCA cables between the receiver and the amp. Match the colors in the same way.

3. Connect the Amp to the Receiver

Now the amp can be connected to the receiver via RCA cables in the amp inputs on the receiver. This will create a loop from the receiver through the EQ and amp and back to the receiver so that all three units are connected.

4. Test Graphic Equalizer

Turn on the receiver, amp and equalizer. Once they are powered up, try controlling the sound with the equalizer knobs. They should fine tune the music according to your preferences. It's easy to change the frequency response or tone of the music with the equalizer knobs.

May 09, 2016 | Pioneer Audio Players & Recorders

1 Answer

I have a 1987 model kenwood home stereo system ihave a graphic equalizer ge 76 control amplifier kc206 synthesizer tuner kt76 power amp km206 how does the RCA connections hook up which ones go to...


First connect all sources like tuner, cassette player, Cd player into the proper RCA inputs of the control amp, then connect the output of the control amp into the input of the equalizer. Then connect the output of the equalizer into the input of the amplifier. This is how to get the best performance and proper outputs to all the right equipment. The speaker outputs of the amplifier would then go to the speakers.

Let me know if you need more help from me by addressing your post to me, or if you wish to communicate with another expert you can address your post to them I.E. @tech48 or @whoever

Thanks and good luck,

Dave

Sep 27, 2008 | Kenwood Audio Players & Recorders

1 Answer

How do I convert so that I hear the audio so that I may transfer the audio da 8 tape. I have an motu 2480 audio


Hi, This, beleive it or not, is pretty straightforward. The first thing to do is plug in to your stereo what you want to record from. example plug in your da 8 tape player/recorders "OUTPUT " into the stereos "TAPE IN " then plug in what you'll be recording with into the stereos " TAPE OUT " does not matter if using cd recorder will work just the same. I hope this helps, feel free to write back with more details if more help is needed. I hope i was of some assistance. Good luck and thanks for asking FixYa, Prodzilla.

Apr 13, 2011 | Audio Players & Recorders

1 Answer

How do I link my technics ge 70 graphic equaliser to my technics cd player sl-pd7a and my technics md player sj-md100 with phono rca leads . Thank you Simon


It would help to know what other electronics (receiver, maybe?) is involved.

If neither of those devices is a recorder, why do you need to connect them to the EQ when your receiver/preamp may have the facilities to connect the two playback devices directly; and the EQ in a Tape Loop?

Scenario A)

Assuming you REALLY want to have the CD and MD input through the EQ because you can't attach them any other way...

CD audio OUT to Line In; MD audio OUT to Playback;

EQ LINE OUT to whatever analog electronic inout you have in mind.

To hear and Equalize the CD set the Input Selector to Source, EQ REC button OFF; to hear the MD equalized set the Input Selector to Tape, EQ REC button OFF.

====

Scenario B:

You have a receiver with only ONE Line Level Aux input and a Tape Loop.

Insert the EQ in the Tape Loop. Attach one of the disc players to AUX and the other to the TAPE conenctions on the EQ.

====

Scenario C

You have a Home Theater System or Audio Vido Reciever.

The following is some boilerplate I made up that should explain some usage limitations.


Be advised that the engagement of any device in a Tape Monitor loop on a late-model Audio/Video Receiver will effectively tie the receiver down to stereo-only analog sound reproduction. I'll explain.


The connections themselves are fairly simple but it pays to understand what happens in the loop.


In general, any Line-Level external processor (EQ, dynamic range expander, etc) will go into a Tape Monitor loop on a receiver. A Tape Monitor, when engaged, sends the stereo analog signal Out to the Processor, massages it and returns it to the receiver via the Tape Monitor IN connectors to be passed on to the receiver's internal processes (volume, tone, whatever).


Old school analog stereo-only receivers consistently work this way. Newer digital and audio/video receivers introduce a couple of problems: 1) digital sound processing to simulate a variety of soundfields; 2) multiple output channels, either discrete or digitally-generated.


The latter requires that whatever signal is being processed experiences a maximum of one analog-digital-analog conversion.


EVERYTHING analog coming into the modern digital receiver is automatically converted to a digital signal for internal processing unless you choose a STEREO-only or STEREO-Direct setting. Consequently, no further external analog-digital conversions would be allowed if, say, a Tape Monitor circuit was activated, and a possible feedback loop could otherwise be created in a digital-sourced selection (output to its own input), so the unit is wired to treat the Tape Monitor as the first analog step in the process and defeats any pure digital sources.


In a multichannel unit, what would happen to the other channels if you sent ONLY the Front Left & Right out for processing? They would NOT be processed. That logical problem also plays into the decision to defeat digital sources if the Tape Monitor is activated. I don't totally agree with the engineers but that's the way it is. Nature of the digital beast.


Okay, back to the hook-up:


Receiver Tape Out (Rec) - to the External Processor (EQ, whatever) Preamp-, Rec, Line-In;


Receiver Tape In (Play) - from the External Processor (EQ, whatever) Preamp-, Play , Line-Out.


So, to sum up, you can only use the EQ or any outboard processor for analog stereo sources. If you actually want to use an analog recording deck you could place it within the typical Equalizer

Feb 01, 2011 | Technics Audio Players & Recorders

1 Answer

Some DVD's sound fine whilst others have background sounds but no voices. I do have an old model TV that has mono sound.Would that cause it?


" Some DVD\'s sound fine whilst others have background sounds but no voices. I do have an old model TV that has mono sound.Would that cause it? "
Hi,
I wrote a short article for someone who had a similar problem a few days ago.
I will edit it for you so that it fits. Here it is.
Your DVD player should have output connectors in the back of it to plug your amplifier or receiver into. If you have a Stereo system (no surround sound speakers, or front center speaker) connect the DVD Audio Cables on the back of the DVD player to the STEREO (or MIXED ) Output Jacks. If it is connected to the Left Front and Right Front jacks of the "Surround Sound" output jacks instead of Stereo(or MIXED) then the dialog will be sent to the CENTER channel output. If you have no center channel speaker you will not hear it. Thus no dialog.
NOTE: In your case for the TV that is mono, here is the solution.
1 Connect a stereo pair of RCA cables (red and white "male" connectors at each end) to the Mixed or Stereo Output of the DVD player (NOT ANY SURROUND OUTPUTS).
2 Purchase an RCA type "Y" connector that has 2 female to a single male connectors on it. Walmart about 3 dollars.
3 Plug the single male plug of the Y connector into the back of the TV set's single mono audio input.
4 Connect the stereo RCA pair from the MIXED output of the DVD player into the Y connector that is now on the back of yourTV.
5 Run your yellow Video output from the DVD into the Back of the Set's yellow input.
That should do it. The sound should be clear and correct with dialog, effects and music.
Hope this helps,
Best,
Mark

Jan 27, 2011 | Audio Players & Recorders

1 Answer

How do I connect my samsung mm-c330 micro hi-fi system to my computer


If you want to amplify the sound you will probably need an adapter. You will use the audio output jack on your computer to an input jack on your receiver. There are usually several different inputs on a receiver but most use RCA phono plugs. The best choice input jack one the receiver is the one that says "AUX". You can buy the adapter cord at any Radio Shack. You will need to be sure to ask for a 1/8 inch stereo phone plug to two RCA phono plugs. This will split the stereo signal into left and right channels for your receiver.

Oct 30, 2010 | Samsung Audio Players & Recorders

2 Answers

NAD 7140


Hi okapi6

Use a 3.5mm stereo jack to RCA connector lead.
370a7a3.jpg Connect this to the AUX input on the back of the 7140, and away you go. Get the lead as an accessory from just about any electronics hobby store.

Dec 07, 2008 | NAD 712

1 Answer

I have a Pioneer SG-540 stereo Graphic Equalizer that only works in the right channel, but more importantly puts out a large amount of excess humming moise and other unwanted sounds when the controls are...


I use the sg 540 equalizer for cd and tuner. (I have two of them) I also use the sa 940 to power my sound. On the tuner input of the amp, i used standerd rca cables and connected it to the output of the equalizer. then i connected rca cables from the input of the equalizer to the output of the tuner. this only works when the top equalizer button is pushed on. hope it works for you.

Jul 18, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Audio Players & Recorders Experts

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sansui Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...