Question about Microsoft LifeCam VX-3000 Web Camera

1 Answer

Sound no sound on either end both webcams were set up said the were working

Posted by on

  • Anonymous Jul 13, 2008

    No sound from either camera during call.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Webcam's mic not working


Unplug it and plug it again.... A calibration screen will come out. Adjust the mics sensitivity accordingly.

Mar 12, 2014 | Agama V-315 Plug & Play VGA Webcam

1 Answer

Cant get the mic to work


Have you set the mic you wish to use with your webcam as Default ?

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the 'Volume' tab - make sure the speakers are not muted, open 'Speaker volume' and set the sliders toward the upper end.
Open 'Audio' tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

Dec 21, 2010 | Gear Head WC330I Webcam

1 Answer

I can't seem to get my microphone to work. Every other sound is working.


You do not say what sort of mic you have - if its a built in laptop mic, a standalone mic or one built into the webcam.
It would also be useful to know what your OS is and what chat program you want to use the mic in
However we can generalise and hopefully put you on the right track

Have you set the mic you wish to use with your webcam as Default ?

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the 'Volume' tab - make sure the speakers are not muted, open 'Speaker volume' and set the sliders toward the upper end.
Open 'Audio' tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure your webcam and mic to the Chat program

Aug 31, 2010 | Logitech Webcam

1 Answer

I recieve audio and my program tells me my mike is working but the person on the other end cannot hear my conversation


sounds like a setting in the program/instant msngr you are using.. Try looking under options-audio options.. I know on many different programs you can just turn the mic off without the sound off all together.

Oct 23, 2009 | Logitech Webcam

2 Answers

Mikomi dc-7120 webcam on Skype


Problem solved:
by shutting down all other programs including the webcam itself, this enabled the webcam to be accessed by Skype and all worked fine!

Jun 17, 2009 | Webcams

1 Answer

Can't see contact's new webcam, but they can see mine. Windows Live.


They may have to set up the camera on there end to work with the program your using.Drivers,settings,etc...

Jun 01, 2009 | Logitech Webcam

1 Answer

Sound issue, but not same as the one posted end of Dec


Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Jan 11, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Audio not working in Windows Live Messenger


un cheak must plug it in or unplug it from mic input and plug back in tight cheak again might be bad mic then u could get a 10 doler one plug back in mic hole use cam for video only

Jan 24, 2008 | Logitech Webcam

1 Answer

No sound


Have you set up your camera in MSN's settings and preferences or downloaded the latest version called windows live.

Feb 23, 2007 | GE EasyCam Pro Webcam

Not finding what you are looking for?
Microsoft LifeCam VX-3000 Web Camera Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Webcams Experts

David Payne
David Payne

Level 3 Expert

13437 Answers

Brian Friend

Level 2 Expert

132 Answers

johncassells

Level 1 Expert

10 Answers

Are you a Microsoft Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...