Question about Chrysler Scosche Factory Radio Interface (Chrysler)

3 Answers

No CD player

If you could please help me out with this, I would greatly appreciate it!! I have a 1998 Chrysler Town & Country with an AM/FM/Tape player. At the dealer, there was a promotion where they would put in a DIRECT ACCESS brand CD player, and hook it up to the radio. It is connected with an 8-pin DIN cable. To get to the CD player, I hit "MODE" to get to the CD player. However, all of the sudden, the radio does not have a CD mode. I checked the connections and all is ok. I was told there is a code to be put in the radio......but i can't find it anywhere!!!!!! If you could please help me, I would truly appreciate it. Thank you so much, Mike.

Posted by on

  • yekim Jul 10, 2008

    It was ok.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

You should get the code from your dealer they will provide for you..

Good luck.......

Posted on Jul 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Without it been connected to the player does it give you the option for CD mode?

Posted on Jul 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 555 Answers

It sounds like the code is a dealer-proprietary thing. Have you checked with them for it?

Posted on Jul 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 delco Toyota radio schematic


Anonymous,
Go to
http://www.the12volt.com/
Look at the top under "Vehicle Wiring" and search for your car.
Press the tab that says "Car Stereo" and Presto, lots of good information. I hope this helps, Ray

Mar 01, 2015 | Ac Delco AM-FM Radio Cassette

1 Answer

How do i connect the 70-5700 to a 2000 lincoln town car?


Not all wires from the CD Player need to be connected to the town car, but you should know what the wires in the town car do. A wiring diagram or stereo adapter from any place that sells after-market radios should be a lot of help.

Sep 11, 2014 | Car Audio & Video

1 Answer

My tensioner belt keeps coming off my 97 chrysler town and country 3.8 what could this be


Hi I am no expert on cars but my husband is. maybe u need to tighten the belt so it stops slipping off. hope this helps

Nov 09, 2013 | Delphi Fuel Pump Chrysler Town & Country...

1 Answer

Upgrade from tape to 6 disc car audio


either a ford cd changer or there is a company called usa spec. contact them. they can help

Feb 11, 2010 | Car Audio & Video

1 Answer

HOW TO INSTALL FM MODULATOR ON HONDA ODYSSEY 2003 EXL


You simply need power, ground, and remote turn on (switched) - these can be obtained 9tapped into) from the back of the radio.

RADIO 12V white/blue
RADIO GROUND black
RADIO SWITCHED white/red


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Dec 02, 2009 | Pyle FM Modulator For Mobile DVD's - PLMD2

1 Answer

When i use a cassette adapter to try and play a portable cd it switches back and forth from side i to side 2 and then ejects the tape. On the adapter it says to keep the player set on side 1 but it doesn't...


You can't do anything about that. If you want to play cd on your car stereo, the best thing to do is use an FM transmiter. They can be bought for about 20 bucks. They plug into the cd player headphones, and you tune your radio to its frequency.

Nov 25, 2009 | Car Audio & Video

1 Answer

Please help me, I have a 4 Runner 2003 that has a JBL CD Player and a Cassett player in one built in the dash. Both are not working: The CD Player keeps flashing (Error 3) when ever I put a CD in...


did the error code start with the tape getting stuck? i have heard that if you disconnect the battery for 5-10 minutes it will reset the radio but make sure you have a code for it to unlock it it the radio has security. they say it starts working again if you do this. again this is just what i have heard a toyota tech say when i worked there. it may be that it knows it has a problem with the tape and keeps it inop, as far as getting the tape out, it either breaks the tape or the tape player or both. i worked at a car stereo shop for 10 years and very rare for both to survive.

Oct 28, 2009 | JBL Car Audio & Video

1 Answer

How do you install this thing


Hello cmiller23606,

It installs in a Toyota Yaris or any other vehicle exactly the same way. The device is an FM modulator and has no vehicle specific wiring. You do need a 12V source from the vehicle and a ground connection as well as access to the radio antenna jack.

Connect power and ground to the 40" wire with the inline switch. Be sure to observe polarity. Piggyback the modulator directly onto your in dash receiver by removing the antenna lead from the receiver and plugging it into the FMMOD01. Then run the 21" cable from the modulator to the now vacant receiver antenna jack. Mount it with screws, double sided tape, plastic wire ties, velcro, or permanent glue. Using the side-mounted slide switch, select an FM frequency of either 87.9 or 88.3, plug a source (CD player, minidisc, videocassette or DVD player, iPod, MP3 player, or any other source with a minijack or headphone output).

Tune your in dash receiver to the selected FM frequency and you're ready to go.

Hope this helps.

Aug 08, 2009 | Scosche Industries Scosche Audio...

1 Answer

CD will not play in 2000 Toyota Echo AM/FM/CD/Cassette stereo


just replace the CD unit it with a new one...many of the new ones also play mp3 cd,s.....thats a plus

Jun 27, 2009 | Car Audio & Video

1 Answer

Delco Cd player not working


look for a small hole normally on the facia,put a small screwdriver inside and press the reset button.hope this helps.

Mar 05, 2009 | Car Audio & Video

Not finding what you are looking for?
Chrysler Scosche Factory Radio Interface (Chrysler) Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63328 Answers

Are you a Chrysler Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...