Question about Proscan PS61670 61" Rear Projection Television

1 Answer

The T.V. works fine, but when we plug in playstation it goes to black/white.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had this issue. If the tv is an HD, you will need to get new cables for HD. This solved my problem.

Posted on Jan 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a sony dvp210p...projects fine but cannot get color..b/w is ok but not color, what am i doing wrong?


If a DLP set you need to check or replace the color wheel. When it goes you lose color and all you get is a nice black and white picture.

Sep 06, 2015 | Sony Projection Televisions

1 Answer

Samsung HL-P5063W audio is fine, no picture. Initially made a loud buzzing sound, so we replaced the color wheel. No more buzzing sound, audio is fine, but screen is various shades of white. Left TV on for...


Hi,Yes your problem sounds like the DMD board.This is how it works: http://electronics.howstuffworks.com/dlp1.htm Basically the light of the lamp goes through a tunnel that carries a color wheel(rotating disc with a gamma of colors that creates the colors on your tv)then the light of the lamp goes through the DMD board which is a chip composed of around 2 million pixels that creates the images and colors.When it starts to fail it will create black bars,pixelation,color distortion or white dots on screens. Here's a video that will help you find where the DMd chip is located : http://www.youtube.com/watch?v=0jr_9A5Xd2Q Have a blessed one!

Apr 02, 2010 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

TV screen goes black, sometimes for hours


This model series had a odd problem that caused this. It was the Hoizonal wire connctors for the yoke. If my memory serves me right, the Yoke wire harness went from Yoke to Yoke and plugged in at the casing of each yoke. What I found is the solder connection on the small board of each Yoke was intermitent. Please be careful if you choose to tackle this. It is in a HV Area.
Hope this helps,
Skyassoc

Jun 19, 2009 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

My sd-582hd5 picture goes black


Like most problems with this model, check and re-solder the connections on the power supply board on the right rear of the tv, just behind where the main power cord goes in. Most problems are around the upper left corner where the white connectors E-12 and others. Check all of them from loose and cold solder solder connections on the board. Hope this helps.

May 08, 2008 | Pioneer SD-582HD5 58" Rear Projection...

2 Answers

Screen goes to black with a ghosting of the last moving image.


This is bad real bad, when this happens it means a board known as the DMD board is failing and must be replaced, the board can run about $650.00 to get it and have it instaled

Feb 07, 2008 | Samsung HLN467W 46" Rear Projection HDTV

2 Answers

Mitsubishi rear projection


On every input?? RF (coax),yellow(composite),S-Video and
component (red,green,blue)??
Verify model # please......T.

Oct 21, 2007 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Mitsubishi VS-4506R No color on S-Vid input


There is a bad S-video cable or there is a broken connection on the s-video jack. In rare cases, there have been a processor IC that goes bad but likre i said, that is very rare. Good Luck

Sep 12, 2007 | Projection Televisions

1 Answer

Flickering of screen (comes and goes) and weird DVD/reception problems


Depending on how old this set is, there might be a bad Hyper board bad. good Luck

Jun 29, 2007 | Toshiba 43H70 43" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

John Miller

Level 2 Expert

253 Answers

Are you a Proscan Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...