Question about ASUS Computers & Internet

1 Answer

I have an asus stiker extreme mother board. i baught it last june. in march it stoped working and the lcd screan in the back shows the code cpu int. i was wandering how i can get the board replaced. i payed $450.00 cnd for this board and was expecting to be blown away with this board but it has had issues since day one. it would only run with 3 of my gig sticks of ram if i put in the 4th it locks up and now it wont even turn on. i would like to send it to asus for replacement asap. please send me all inf needed for me to do this so i can get my pc back in use

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Asus Service Center Canada
+1-888-678-3688 (07:30~18:00 Mon.~Fri.)

Posted on Jul 10, 2008

  • Bob Duker Jul 28, 2008

    The information I provided will get you in touch with their RMA team and allow you to get the board replaced.



    Please do not use the "Inappropriate" rating unless you are either offended by the nature or tone of a solution or the solution is completely useless to you and off topic.



    The only way you can get your board replaced is by going through the manufacturers RMA process, which in this case, means calling the number provided on their website for your area, which, since you list Canadian currency in your purchase price, would be the canadian help desk.



    In addition, experts are not allowed to email you outside of this forum.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cpu failure Light Stays On Cant Boot To Post Start up Asus P7p55


Check your power supply. Sounds like a bad or insuffecient power supply.

Mar 22, 2010 | ASUS P7P55D PRO Motherboard

1 Answer

Mother Board problem


use bios CD update bios on the mother board.ok
after that cpu fan...refix the cpu fan after cline,
apply the paste on the Proccessor.it working fine

Mar 16, 2010 | ASUS P5GC-MX/1333 Motherboard

1 Answer

I have a asus striker extreme motherboard, quad core Q6600 processor, 8800 gtx graphics card, my pc was running fine suddenly it just hanged ,this has happened a few time before but after a while it starts...


Sounds like you need to go into the Bios if you know how and adjust the thermal values in there. I suggest checking heatsink on cpu is seated correctly and add a fan to increase airflow in side the case. Seems like a heat problem from what you describe.

Dec 14, 2009 | ASUS Striker Extreme Motherboard

1 Answer

I want to disable chasis intrusion switch. Beacuse mother board perfectily well out side cabinet ,but does not boot after fitting inside cabinet


ok do it only if u r a professional..'

refer to the extreme right-hand-bottom [as ur back panel to the left n cpu to the top] of u r mother/main board..in here there is a 3-pin jumper named 'CHASSIS'..place a jumper or set it to pin-2-3 [the middle n right pins respectively]..
hope it'll work..for reference :
http://www.filefront.com/4169747/P4GE-MX-Users-manual-for-English-Version-E1862/

always better to seek professional advice of ur system admin/vendor....

Nov 16, 2009 | ASUS P4GE-MX Motherboard

1 Answer

Asus striker extreme motherboard comes up with cpu init code on lcd screen


You will probably have to go into the BIOS and set defaults. You can also Goolge the computer to find the jumper that can be used to default the BIOS back to factory spec's.
you can also call Asus and have them send you another BIOS chip, it plugs right in.
(found this 1 on the Internet, Goolge "cpu init code + Asus")

Jul 07, 2009 | ASUS Computers & Internet

1 Answer

Need to change mother board


WRONG ON THAT I HAVE ALL THE BOIS INFO YOU NEED.

WWW.lemig.umontreal.ca/bois/bois_sg.htm
www.ping.be/bois/numbers.shtml
www.allelec.com
email: mike@ttitech.com
www.unicore.com

go on line type in

update bois or upgrade bois
enter

typing in the bois name and date will tell you about any update or chacges and how to get the updates for free'

bois download drives my work also

rod

ps if you want mother information buy the new cpu magizine [ computer powers issue march 2009}

give you mother boards cpu cooling options cpu venders and option and more info check it out

rod

Feb 04, 2009 | AMD Asus A7V-ML Socket A MicroATX...

1 Answer

Asus P4B 1.7 mhz P4 motherboard restarts every 10-15 minutes...


Check the CPU temprature from the BIOS. Sometimes if the CPU overheats the system will automatically reboot. High CPU tempratures goes form (60-70). You can also monitor the fan speed and cpu temprature using this utility
http://www.almico.com/speedfan.php

Oct 27, 2008 | ASUS P4B-M (P4BM1400WOLTINY) Motherboard

2 Answers

ASUS STRIKER FORMULA


Hi,
This Is A Processor error Message, CPU ( Central-Processing-Unit ) INT ( Intermittent Fault ) wrong Type Installed. ( Faulty Processor ) Disconnected Fan-Wire To Motherboard ?
Or if It,s INIT Then It Fails To Initialise The CPU.
Is The Board Auto-detect Settings ? Or Jumpered ?
Mike @ Compurepair.

** Please don,t Rate This Post until Your Problem/Issue Has Been Resolved**

Feb 27, 2008 | ASUS Striker Extreme Motherboard

10 Answers

Processor for P5VDC-MX


Hey there alcouto, your motherboard supports Intel Celeron, Intel Pentium 4, and Intel Pentium D processors. The socket set is LGA775. The FSB should be no higher than 800Mhz. It appears you have purchased the wrong CPU for your board. I hope the rest of the info helps you on your next purchase. Good Luck!

Jan 29, 2008 | ASUS P5VDC-MX Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

David
David

Level 3 Expert

778 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...