Question about Intel Genica 56K V.92 PCI Data/Fax Modem - RETAIL (DSEVTGEN82537)

Open Question

MY wifi dosent work

When i try to connect to a wireless network connection it keeps on saying (Identifying Public network) it used to connect directly but i think it was when i used tune up 2008 that it some how messed up my settings. I tried using the diagnose and repair but it dose not work I NEED HELP. I called the company guy on the phone and he says that its because of the mother board and that i should change it but i don't believe a person who didn't even physically check my laptop . oh by the way my laptops a Vectron

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Wireless connects, but no activity received

Hi, Turn off any firewall (incl Windows firewall). In the connection window click on the right tab and see if an IP address has been asigned to your wireless interface. If it has click Start->Programs->Assessories->

Posted on May 02, 2007

Cryptonteki
  • 97 Answers

SOURCE: windows xp modem broken and cant use wireless belkin

Have you installed the wireless router....

Posted on Feb 25, 2008

  • 121 Answers

SOURCE: My laptop cant find the card

is your card connected proper if so l would say its faulty now

Posted on Mar 03, 2008

dhruv765
  • 53 Answers

SOURCE: Laptop cannot connect to router with WPA-PSK security

What I believe here is you are not typing in the pass-phrase(wireless password) correctly.

Go to 192.168.1.1 log on to the router ,in wireless section you will find the pass phrase,, create a new one and then try to connect.

Posted on Jun 09, 2008

latinmcgyver
  • 208 Answers

SOURCE: Unidentified Network

download latest drivers from downloadfinder.intel.com

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set up netgear ex6100 wifi range extender


Overview:
This article describes how to set up a NETGEAR EX6100 in Extender Mode
The extender connects wirelessly to your existing WiFi network, and then it creates a new WiFi extended network and links the two WiFi networks.
Symptoms:
Cannot connect to extender
Extender broadcasting EX6100_NETGEAR_2GEXT
Extender broadcasting EX6100_NETGEAR_5GEXT
Extender cannot access Internet or network
Process:
1. Place your extender in the same room as your WiFi router.
2. Plug the extender into an electric outlet and wait one minute.The PowerLED lights green.
If the Power LED does not light, press the Power button on the side.
3. Make sure that the mode switch on the extender is set to Extender.
4. Use a WiFi network utility on a computer or mobile device to find and connect to the EX6100_NETGEAR_2GEXT or EX6100_NETGEAR_5GEXT (SSID) WiFi network.
Note: EX6100_NETGEAR_2GEXT and EX6100_NETGEAR_5GEXT are the default name of your extender's wireless networks, and by default it is unsecured. If you changed the wireless name or security in the past, connect to the new name or enter the passphrase when prompted. EX6100_NETGEAR_5GEXT is only visible if your wireless adapter is 5 GHz capable.
After the wireless connection with the computer or mobile device is established, the Client Link LED lights solid green.
5. Open a web browser window from the same computer or mobile device.The browser takes you directly to NETGEAR genie Smart Setup.
Note: If you are not automatically directed to NETGEAR genie, launch an Internet browser and type www.mywifiext.net in the address field of the browser. Enter admin for the user name and password for the password.
6. Select a 2.4GHz WiFi network to extend and click the Continue button.
7. Type the network passphrase (also called password or security key) in the Passphrase field and click the Continue button.
8. Repeat steps 6 and 7 to select a 5GHz WiFi network.
Note: If your router does not support the 5GHz band, click the Skip button.
9. Select Private Network(home network) or Public Network radio button, and click Continue.
Note: Selecting Public Network will enable NAT and DHCP on the EX6100. For more info on NAT refer to: What is NAT (Network Address Translation)?
10. Type the name (SSID) for your WiFi extended network in the 2.4GHz and 5GHz Network Name (SSID) field and click the Continue button.
Note: You can use the same security settings as your existing network by selecting the Use the same security mode check box.
The WiFi extended network settings are applied.
11. Use a WiFi network manager on a mobile device or computer to connect to the extenders newly created WiFi network.
12. Click on the check box and click on Continue to finalize the installation.
13. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
Note: The location you choose must be within the range of your existing WiFi router network.
14. Plug the extender into an electrical outlet and wait one minute. The Power LED lights green. Connect to the extender network and enjoy the extended Wifi network.

May 02, 2014 | Computers & Internet

1 Answer

Laptop will not connect to internet via router. Will work when connected direct through a cable. Getting message 'validating identity'.


This happens when windows can't complete identifying whether you are connected to a public, private or home network. This is often the case when the router doesn't support IP6 (which virtually all home routers don't).

In most cases you can safely disable IP6. To disable see the following microsoft knowledge base article (which also has 'FixIT' scripts to make the changes for you)

http://support.microsoft.com/kb/929852

Once IP6 is disabled re-join the wireless network and complete the identifying process, i.e. select home, work or public network depending on what you are connecting to.

Please take the time to rate this answer.

Many Thanks Don.

Sep 05, 2011 | Computers & Internet

1 Answer

I have acer laptop 5580. 3 year old. Recently i have installed Windows 7. Wireless was working nice. Now, system is identifying the wireless, but not connecting. After troubleshooting it is giving...


If your device can detect other acces point then, your wifi device is correctly installed. If not, os will tell your wifi have problem. If you try connect, and have problem with connection, it came from your acces point(wifi router expample). Maybe it have password that have not match with your pc. If that access point is yours, then you can try check the password for wifi using cable connection.

If that acces point(wifi router) is not yours(public), then you cant get the password unless you try hack using air-ng, backtrend using wifi device that can capture and monitor the network(wifi *** support a/b/g exmple) if it only support b/g, you cant get wep encryption password.


If it does not have password, and you try to connect, but it still problem, that mean, it have restrictly to MAC address in wifi router.

May 09, 2011 | Acer (BCM94318MPG) Wireless Adapter

1 Answer

Can't connect to public wireless "the settings saved on this computer for the network do not match the requirements of the network"


It sounds like you have a different wifi network with the same name as the public wireless network you are trying to access. I would open your wireless control panel (if you are using a 3rd party's product to manage your wifi, else use Windows' wifi manager) and delete any existing profiles with the same name as the public wireless network you are trying to connect to. Then try again. You may have to delete them in both the windows interface and a 3rd party interface before it will work.

Jun 18, 2010 | Toshiba Satellite A215-S4747 Notebook

1 Answer

I can't access the internet via my Optus Netgear


I am having exactly the same problem. It occurred on Sunday 17th. I have phoned Optus who seem unable to work out what has happened. It will work wirelessly but not recognise it when set up via ethernet cable.

Jan 17, 2010 | NetGear CG814M Wireless Cable Modem...

1 Answer

HP Pavilion dv9700 laptop, Wireless stops working at random.


HP's normally use the Atheros wifi card which recently has had many problems such as what you describe here. Try a different wifi card to see if this solves the problem. If you don't have a wifi card take it to a local repair shop to see if they have one they can try for you.

Sep 23, 2009 | HP Computers & Internet

2 Answers

I am having troube getting my emachine laptop 5310 to connect to the internet it says it has WIFI do I need an adapter or something else to connect to it?


Your laptop has lan access go here for directions on how to use it.
http://downloads.emachines.com/userguides/Wireless_Supplement_AACR53700002K1_Online_en.pdf

Jul 13, 2009 | E-Machines M5105 Notebook

1 Answer

Excellent Wireless Network Connection, cannot access internet


The unsecure public network nay be using mac address filtering. In this case, the network will show as being unsecured, and will even allow you to connect in some cases, but then will not allow you to surf once connected.

May 28, 2009 | D-Link Air DWL 650 802.11b Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...