Question about Vacuums

1 Answer

Rainbow E Series Vacuum - Vacuums

Posted by on

1 Answer

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=767132
Generic problem for all Vacuums
Rainbow E Series Vacuum
Posted by bekahness08 on Jul 10, 2008
Rainbow E Series Vacuum

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Please state your problem… all you have is just the description of the vacuum but not the actual problem and I can’t answer the question if you don’t state the problem you are having. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

The Rainbow / RexAir Factory phone number is listed below:
http://rainbowvacuum.com Customer Service
1-248-643-7222 Monday thru Friday from 9:00 am to 5:00 pm EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jul 10, 2008

5 Suggested Answers

  • 883 Answers

SOURCE: Rainbow E Series Vacuum

the motor is actually spinning backwards? try to confirm this.

Posted on Jun 02, 2007

reddevil6
  • 1673 Answers

SOURCE: Rainbow E Series Suction Problem

Being an E series some have a corrgated filter in the top, there is also a filter on the back. Could be a motor problem, not turning as fast as it should, in which case you will have to replace the motor. You might check, some had a 10 year warranty on the motor. If you are the original owner and only have had it 5 years, then it may be covered.

Posted on Jan 19, 2008

  • 3 Answers

SOURCE: Rainbow aqua mate II instructions

You have the vacuum and the basin, you put them together just like when you vacuum but don't put water in the basin. There is a large white container that comes with the shampooer. you fill that up with water and then you place the vacuum cleaner and the basin on top of that. Now you will need the water hose (not the one that has the gas pump hadle). Hook that in the same spot that you do for vacuuming. Then you take the shampooing handle( it will have a trigger and a little white bottle and some tubes hooked to it) the one end of it hooks to the water hose and the other end hooks to the wands. There are 2 wands that come with your shampooer. At the end of those the shampooer head will be attached. There are two separate tubes there is a thick tube ( there two tubes fused together) and a thin tube, they hook to the large white container that you fill with water. Just look and you will see where they go. Then there is a tube that hooks to the shampooer head at the bottom. The you take the little bottle and fill it with your shampoo. You should have gotten some clips to hool onto your hose so that you can keep the tubes attached to it so they aren't in the way. You should be set. I hope I helped.

Posted on Feb 13, 2008

  • 11 Answers

SOURCE: Rainbow Model e Series will not start. Where is the reset button on this vaccum?

There is no reset button on the canister. It may be a bad power switch, a power cord, or the button that presses in when you put the water basin in place may be bad - or the prong on the water basin that pushes that button in when you place the canister on the basin may be broken off.

Posted on Jul 03, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a step-by-step procedure for rewiring?


[PDF]Rainbow Vacuum Schematic - WordPress.com

https://carniomosdirt.files.wordpress.com/.../rainbow-vacuum-schematic....
We carry the Rainbow Vacuum e2 (Black) Main unit parts. to our schematics page and download the schematic that ... Question about Rainbow E series Canister Wet/Dry.Vacuum ... We carry everything from the OEM electrical cord,. Upright .

[PDF]rainbow vacuum manual repair.pdf - WordPress.com

https://arahentau.files.wordpress.com/.../rainbow-vacuum-manual-repair....
Recent Rainbow E series Canister Wet/Dry. Vacuum ... Rainbow Vacuum E SeriesFilter Queen Vacuum Wiring Diagram Oreck rainbow vacuum cleaner.

Nov 04, 2015 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

How to fix rainbow vacuum e series on/off switch


You can find a walkthrough on disassembling your E series one speed Rainbow here.Rainbow E Series Motor Unit if you go to step 9 that gets you to the switch and how to unwire it.

GoodVac.com
800-775-6586

May 28, 2014 | Rainbow 75th Anniversary Canister Vacuum

1 Answer

Reset button on Rainbow vacuum


There is not a reset button on this model

Apr 01, 2014 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

Why would the motor of a Rainbow E series vacuum cleaner be made


The bearing for the single speed eSERIES is available on our website. Click here

RainVac
www.rainvac.com
800-523-0510

Mar 18, 2012 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

Im looking for a service manual for Rainbow E Series Vacuum - where can I purchase one?


You can get the schematic for the E series here, http://www.elkypro.com/hoops2005/vacuum_parts/rexair/E-2.html There are actually two different models of E series model E-2 vacuums.

If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph

May 23, 2010 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

E series Canister Wet/Dry Vacuum: My tank foamed up into the motor and now the rainb...


Hi, there is no reset button on a Rainbow vacuum. There is a safety switch on all E series and E2 series Rainbow vacuums, that keep it from running without the water basin on it.
If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph

May 17, 2010 | Rainbow E series Canister Wet/Dry Vacuum

2 Answers

Have a rainbow e-2 that was running and quit.


Hi, there is no reset button on a Rainbow vacuum. There is a safety switch on all E series and E2 series Rainbow vacuums, that keep it from running without the water basin on it.

If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph

Apr 25, 2010 | Rainbow E series Canister Wet/Dry Vacuum

6 Answers

RAINBOW E SERIES REPAIR MANUAL


Hi. I found it on amazon, here: Amazon com rainbow vacuum manual. I hope I have helped. cheers

Mar 31, 2010 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

RE: Installing rainbow E series water pan latch


http://geeksquad.fixya.com/ThreadView.aspx?prdid=19674&thid=652000
RE: Installing rainbow E series water pan latch
Posted by bettyannsoto on Jun 06, 2008
Need to know how to install rainbow water pan latch and spring latch

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Rainbow E Series Canister Wet/Dry Vacuum. The Rainbow latch can be replaced but I believe it is a pop rivet that holds and replaces the old latch and to replace the new latch, I have seen it done but if you don’t have the right tools you may want to contact your local vacuum cleaner dealer in your area, it can be done. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

The Rainbow / RexAir Factory phone number is listed below:
http://rainbowvacuum.com Customer Service
1-248-643-7222 Monday thru Friday from 9:00 am to 5:00 pm EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 06, 2008 | Rainbow E series Canister Wet/Dry Vacuum

1 Answer

Rainbow E series


http://geeksquad.fixya.com/ThreadView.aspx?prdid=19674&thid=651990
Rainbow E series
Posted by bettyannsoto on Jun 06, 2008
Need to install rainbow side water pan latch and spring. How to do it?

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Rainbow E Series Canister Wet/Dry Vacuum. The Rainbow latch can be replaced but I believe it is a pop rivet that holds and replaces the old latch and to replace the new latch, I have seen it done but if you don’t have the right tools you may want to contact your local vacuum cleaner dealer in your area, it can be done. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

The Rainbow / RexAir Factory phone number is listed below:
http://rainbowvacuum.com Customer Service
1-248-643-7222 Monday thru Friday from 9:00 am to 5:00 pm EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 06, 2008 | Rainbow E series Canister Wet/Dry Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

D. Floyd Kolb
D. Floyd Kolb

Level 3 Expert

43501 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...