Question about Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Bosch dishwasher My Bosch dishwasher is not draining and a tap symbol has lit up, any suggestions please

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

I had this same problem and in addition as it ran water dripped out the bottom while the dishwasher was running just before the tap light came out. Check the outlet hose is not blocked. Ours was blocked at the T junction where it met the sink outlet. Once the blockage was cleared we hit another problem - the pump kept trying to drain - even when the door was open. Found an excellent solution to that on this site. It had occured as the previous problem had casued the flood switch to be triggered. We had to tile the sihwasher back 45 degrees to fix it. Now its workig fine again.

Posted on Oct 19, 2008

  • Linda White
    Linda White Feb 16, 2014

    I just had this problem. I pulled the machine out to check inlet and outlet hoses. I then manually lifted the pump which is inside the dishwasher (small round grey dome). It then emptied properly and I restarted the machine. Works fine now.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Dishwasher won't drain.


Is there a hi-loop in the drain line, is water siphoning back in after a drain cycle?

Jul 08, 2016 | Bosch Dishwashers

1 Answer

SHE/43M bosch dishwasher fault code C3, P0, not washing, but draining


I have the exact same thing. While P0 is on the display, Regular Wash is lit and Quick Wash is flashing

Nov 07, 2011 | Bosch 24 in. SHU43 Built-in Dishwasher

1 Answer

Hi I have a Bosch dishwasher . The red tap symbol is showing . The little filter pump is spinning but not pumping . It continues to run when door is opened . Can you help please


sounds like you have a water leak. The machine is fitted with a leak detection device that runs the drain pump constantly as a safety mechanism. If you want to look your self you will need to pull the machine out and tilt it back and if possible remove the bottom panel, should be 4 screws, this gives you access to the components. If it doesn't come off then you will need to remove either 1 or both of the side panel, its just a number of screws holding them. Then see if you can see where the leak is coming from, you may need to order a new part. Hope this helps.

Mar 07, 2011 | Bosch 24 in. SHV55M03GB Built-In...

1 Answer

Hi I have a Bosch dishwasher . The red tap symbol is showing . The little filter pump is spinning but not pumping . It continues to run when door is opened . Can you help please


sounds like you have a water leak. The machine is fitted with a leak detection device that runs the drain pump constantly as a safety mechanism. If you want to look your self you will need to pull the machine out and tilt it back and if possible remove the bottom panel, should be 4 screws, this gives you access to the components. If it doesn't come off then you will need to remove either 1 or both of the side panel, its just a number of screws holding them. Then see if you can see where the leak is coming from, you may need to order a new part. Hope this helps.

Mar 07, 2011 | Bosch Dishwashers

1 Answer

My dishwasher dont drain, the tap light is on



Hi,

Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out

heatman101

Sep 06, 2010 | Bosch Dishwashers

1 Answer

Red tap symbol lights up but no water comes in to dishwasher


I hate to point out obvious things, but did you crank your line tap all the way out clockwise? And if you are using a line tap, are you sure the piercing needle conpletely punched through the hose?
Try removing the water line from your dishwasher and opening the valve to verify water flow.

Mar 11, 2010 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

2 Answers

There is a symbol of a tap when i switch the dishwasher on..and it wont wash anything? It sounds like its draining? Ive tried resetting it and switching on and off but nothing. Does it need filling up with...


need to check your water supply from the house to the dishwasher, it won't operate properly if the water level in the washer is low. Check the water valve at the sink ands the water valve at the dishwasher.

Good Luck on your repairs

Dave

Dec 03, 2009 | Dishwashers

1 Answer

Bosch dishwasher wont drain


You can check the drain or the filter. You will have to pull it out of the space it is now to access it. Items will get stuck in the drain clogging it.

Feb 22, 2009 | Bosch 24 in. SGI43E05GB Built-in...

1 Answer

Bosch classicxx dishwasher not working check water light on


he there,

sounds like there may be something caught in the drain pump itself.

can you provide me with the complete model # on your dishwasher please?

thanks

Sep 25, 2008 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...

Not finding what you are looking for?
Bosch 24 in. SHU43 Built-in Dishwasher Logo

2,196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...