Question about Fuji FinePix A350 Digital Camera

1 Answer

Missing cd-rom I've had my A350 for some time now, but never installed the cd-rom onto my computer (Windows X`P). I now seem to have lost the cd. Any suggestions as to whether I can download the relevant software? Thanks, Veronica

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Fuji Master
  • 102,366 Answers

You don't need any special software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

Posted on Dec 31, 2012

6 Suggested Answers

  • 1 Answer

SOURCE: Lost My Software For My Fugifilm A350 - 5.2 megapixels

I have a Fugifilm F460 Digi camera 5.1 m/pixels Finepix. Unfortunatly the disc that came with the camera has cracked so cant be used. can you help

Posted on Apr 30, 2008

  • 1 Answer

SOURCE: I want to download the software for the Fine Pix S304

i have not got my cd which enables me to download from my camera

Posted on Jan 25, 2009

  • 11967 Answers

SOURCE: Finepix J12 cannot upload photos onto computer.

Here's the best solution. Get a card reader for your card (available at Walmart, Kmart, Best Buy, etc.) and use it to download your pics to a folder you create on your desktop. Once there, you can do anything you like with them.

Posted on Sep 22, 2009

  • 1705 Answers

SOURCE: i lost my CD ROM software to install finpix viewer F45FD

Try here :-

http://www.fujifilm.com/support/

Posted on May 01, 2010

  • 34 Answers

SOURCE: i lost my software cd

Yes. You can download the software from this link - http://www.fujifilm.com/support/digital_cameras/software/

Click on 'See All' link, to view all available softwares in a single page.

Posted on Aug 15, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows xp not start following file missing corrupt system32 confi


Restart the computer, and force it to boot from the Windows XP CD-ROM. Choose "Repair Existing Installation", and see if that fixes the problem.

It might be better to remove the disk-drive, attach it as a "slave" disk-drive in some other computer, and copy all your files onto an external disk-drive.

Feb 27, 2014 | Toshiba Portege Tablets & eReaders

Tip

NTLDR is missing?


A missing NTLDR is a common start up error that can appear on the screen while booting a computer running a Windows operating system. This error may occur due to number of reasons.

NTLDR is short for Windows 'NT LoaDeR'. It's entirely involved in the loading of the operating system.

Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk/hard drive that contains no operating system or CD-ROM drive. Firstly what you've got to to is press the Delete key multiple times as your computer boots up until it displays the BIOS screen. Then you will need to find the boot disk priority setting. Make sure this is set to your drive that has Windows on it (as priority 1) and not the CD-ROM drive/stiffy drive or empty hard drive. You can set the CD-ROM/DVD-Rom drive to priority 2 if you like.

Once you have checked that and have set it to your master/primary hard drive (the one that you've installed Windows onto), save and exit the BIOS and on reboot your system should boot into Windows normally.

If you only have one hard drive and the boot disk priority 1 is set to it and you still get this message, then it means that your NTLDR is either corrupted or missing. In the BIOS you will need to change boot disk priority 1 to your CD/DVD drive. Once this is done save and exit the BIOS.
As the PC reboots insert your Windows install disk and let it load.

Hit [R] when prompted if you need to repair system files and then [C] at the 'Welcome to Setup' screen to start the Recovery Console. This will let you copy NTLDR from the CD to C:\

If this fails then you will need to install a fresh copy of Windows on your system. All is not lost though as you can still save your data that is trapped on the NTLDR missing hard drive. If you are not quite seasoned with computers and electronics then this is the job for a PC technition. Simply take your PC down to your local Computer store and explain your situation (Don't forget to take your original Microsoft Windows with you). They will back up your data, re-install Windows and the put all your data back on for you.

on Nov 15, 2010 | Computers & Internet

1 Answer

Bootmgr is missing


Take one bootable windows cd rom , insert the cd rom in cd rom drive, restart your Laptop , go to bios setup and select boot from cd rom after then save and exit . your Laptop will boot from cd rom . it will take some time , when you will see action prompt , select R ( if your bootable windows cd rom is SP2 ) , select D ( if your bootable windows cd rom is SP3) . if you select R you will be prompt repair consoul , format C:\ then instal windows SP2 . if you select D , you will be prompt delite partition , delite partition C:\ after then select C to creat partition and install windows SP3. either of one windows install like that and problem will be solved. n.b. if you don,t have cd rom drive pls collect USB cd rom drive.

Jul 30, 2012 | Dell Latitude D620 Laptop (Latitude-C620)...

1 Answer

After installing windows 7, the LG DVD drive doesn't work and windows says it cant install the driver


Hi,

Many older ICH7 chipset drivers as well as generic derivers has been removed from the winodws Latest Built, for you it it seems the cd/dvd rom drivers are missing.

I here give the link uploaded by me, which contains the driver for CD/DVD ROM fro windows 7, Please open device manager and manually locate the CD/DVD rom and select the .inf file to install the driver

http://rapidshare.com/files/297330669/CD_ROM_Drive.rar.html

Please leave me comment, if you need further assistance
Rnj VINODKUMAR


Rename CD-ROM Drive.txt to CD-ROM Drive.rar!

@ADDeveloper

Try the Intel package(link posted before), that's an Intel mobo.

Oct 24, 2009 | Computers & Internet

3 Answers

How can i get in to my windows xp i lost/forgot my password. cd-rom is not working


Install a working CD-ROM drive.
Put your Windows XP disk into the CD-ROM drive.
Boot the computer from the CD-drive.
If you are very careful, and read the installation questions carefully,
and respond accurately, you can install another copy of Windows
onto the 'C:' drive, AND CHOOSE A FOLDER NAME THAT IS *NOT* 'C:\WINDOWS'.
Eventually, you can copy all your files from your "old" MY DOCUMENTS folder to your "new" MY DOCUMENTS folder.

Sep 11, 2009 | Microsoft Windows XP Home Edition

2 Answers

How i install window in MM10-PC sharp laptop


Installing windows in Personal Computer are needed Bootable at CD/DVD Drive. Your problem is you don't have any CD/DVD Drive.

Use a Portable External CD/DVD Drive.

It's available in the market.
Good luck!

Aug 23, 2009 | Sharp Actius MM10 Notebook

3 Answers

Acer aspire 3680


You need to boot with your windows vista cd and select repair install. This will reinstall the windows files, including the ntldr file, leaving your data intact. Make sure you only do the repair install, if you do the full install, it may wipe your data.

Thanks and please take a moment to rate as fixya.

Nov 07, 2008 | Acer Aspire 3680 Laptop

3 Answers

Lost installation disk for canon pixma iP 1500 inkjet printer


how do i install my printer onto my new computer if i lost the installation disk or cd rom?
I've lost the installation disk for mu Canon PIXMA iP4000. How can I download for free to reinstall? Thanks.....George

Jun 03, 2008 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

CD-ROM Driver Problem


CD-ROM error codes cdr101, cdr102, cdr103 Test the CD-ROM drive.

Device Manager information and help Later versions of Microsoft Windows renamed this category to DVD/CD-ROM

Installing a IDE/EIDE CD drive Ensure you have a working bootable floppy diskette with CD-ROM drivers.

Click on the above links, Follow instructions.


Should get ya back in/ Please dont for get to Vote.Thank you.

Dec 14, 2007 | Compaq Presario R3000 Notebook

Not finding what you are looking for?
Fuji FinePix A350 Digital Camera Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...