Question about Mustek ScanExpress 1200 Flatbed Scanner

4 Answers

Scanner I have recently bought the Mustek scanner, and the plug to go into the electric socket is a two prong plug. I need an adapter or another attachment to the scanner and electric socket. Please help

Posted by on

  • 4 more comments 
  • pathos Jul 10, 2008

    Thank you for your suggestion to get a 3-way pin adapter or plug. Also will this scanner work alright on my computer which is Windows XP Home Edition Version 2002?

  • pathos Jul 10, 2008

    I just wanted to find out if the Musek scanner I have recently bought will work OK on Windows XP Home Edition Version 2002?

  • pathos Jul 10, 2008

    Yes, thank you.

  • pathos Jul 10, 2008

    Yes, thank you.

  • pathos Jul 10, 2008

    Thank you, and I will follow through with your advice.

  • pathos Jul 10, 2008

    Thanks for the advice which I will follow through.

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 689 Answers

Hi

Its very simple, All you need to get a low cost AC plug adaptor which can be found most of the DIY shops, Also you can easy cut the unfitting ground pin of the cord if you dont wish to buy the converter.
Converter looks like this
Scanner - dc7e8b6.jpg
Please let me know if you need further assistance. Dont forget to rate the solution after resolve the issue.

Good Luck

Posted on Jul 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

Greetings,

Yes it is XP compatible. Use the Installation CD or visit the manufacturers website to download the driver.

Keep us posted and thank you for using our service.
FixYa for all your troubleshooting needs.

Posted on Jul 10, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

Go your near electronic sotre bue the convertor to prong to normal connaction

Posted on Jul 10, 2008

  • sandip panchal
    sandip panchal Jul 10, 2008

    ya its work

  • sandip panchal
    sandip panchal Jul 10, 2008

    u shoud to do install driver for xp

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 382 Answers

Hi,
Yeah you need an 3 pin adapter in order connect the socket to the plug point..you can connect the two pron plug to that adapter,you can get that "3 way pin adapter or plug" in a electrical store near you place!..hope it helps you..please dont forget to rate the solution..thank you..!

Posted on Jul 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My MX922 printer worked well this morning. All cartridges have ink but ALL lights under the cartridges are on and print comes out blank. There are no error codes or anything abnormal displayed


This problem is mainly happens to all inkjet printers. If your printer print blank pages then please at least once go to official site of Canon and check whether there is any printer/scanner drivers update is available or not. If yes then download it. Also check your ink cartridges. Because if there is no print on paper that means your ink might be dry.Sometimes it clog the print head. If your ink cartridges get dry change it. Or you should clean your printer's print nozzle by using printer's control panel. I hope all these suggestions helps you. If doesn't then watch Canon MX922 Manual English

Jan 12, 2017 | Canon Pixma MX922

1 Answer

Scanner computer cant comunicate


What do you want Darrell?

Code reader or Professional scan tool?

I think your going to need a shop to work on it

Without wiring diagrams your done

You have to chase every wire from the under dash
connect to their ends, until you fix the issue & can
connect to the Bus & Data stream,we can't help with that

Jul 17, 2014 | Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

1 Answer

Canon pixma mx 922 will not scan


This happen due to poor version of drivers.Make sure that you install latest drivers. If you don't have then download it from PIXMA MX922 Canon Software Driver
For more help or guidance check Canon MX922 Manual English

Jul 28, 2013 | Office Equipment & Supplies

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

2 Answers

LSU error SAMSUNG SCX 4725FN


Laser Scanner Unit or LSU is what writes to the surface of the drum. The glass above the cartridge in the machine may be dirty. The mirror motor in the LSU could be bad or needs to be cleaned to spin better. The Laser diode may be faulty.

This is not a user-serviceable issue. You will need to contact Samsung for a service. You can do it online via Samsung website or contact the vendor to see who will they appoint to service the printer to, especially if it is still under warranty.

Jan 27, 2011 | Samsung SCX-4725 Laser Printer

1 Answer

Why does canon MP258 printer with scanner can't scan japanese yen paper bill amount 10,000. I tried it over 10 times but it stops,. And when i tried US paper bill, it works well. I need some explanation...


When you scan with any scanner it utilised the software with "Optical Character Recognition functions, usually abbreviated to OCR -> OCR is a field of research in pattern recognition, artificial intelligence and computer vision." to scan and record the scanned object, sometimes it does not or cannot recognise certain symbols or characters because of man made software & hardware have its limitations too.

Hope it helps.

Nov 12, 2010 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Mustek ScanExpress 1200 Flatbed Scanner Logo

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mustek Office Equipment & Supplies Experts

Tony

Level 3 Expert

2598 Answers

kakima

Level 3 Expert

100140 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Mustek Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...