You might be connecting the Camcorder using USB interface. The drivers for USB streaming is not available for Vista and Windows 7..
Operating System also matters..
If you're using XP OS, you can install the driver from supplied CD and use Windows Movie Maker to transfer the recordings using USB interface.
Vista, Windows 7 - You need to use i.LINK or A/V interface to transfer the recording. When using i.LINK with Vista, you can use the Picture Motion Browser software.
I think this will definitely help you to connect the Camcorder..
SOURCE: panasonic nv-gs27 driver
Drivers are not available any where but you can try this option:-
windows XP version to Profesional SP2, and all the devices were identified, properly installed and fully operative, including the Panasonic GS27 camera, connected to the PC through the firewire port, without need any driver/controller.
or visit this site:-
http://www.reluctant-diyer.co.uk/
SOURCE: driver of panasonic NV-GS35
Did you try going to the Panasonic website? Go to the camcorder page in the support area and then go to drivers! Good luck.
SOURCE: nv-gs27 panasoinc drivers for widows vista
sal unde gasesc un draivar de camera video panasonic nv-gs27
SOURCE: PANASONIC NV-GS27
Click on this link to get the driver you need.
If you don't see it in the support section, contact Global Support on this link to find out how to get the driver sent to you.
2,257 views
Usually answered in minutes!
×