Question about Remote Controls

Open Question

Remote codes I have a universal remote control # 6711R1P072J and I need the codes to program it. I have a Goldstar DVD/VCR combo and a Phillips TV

Posted by on

5 Suggested Answers

  • 5 Answers

SOURCE: I cant program a phillips universal remote to my tv/dvd/vcr combo

Call Philips help line (919) 573-7854 they have the remote numbers you need

Posted on Jan 05, 2008

bubba10560
  • 1 Answer

SOURCE: programing rca remote for dvd/vcr combo

all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go

Posted on Mar 07, 2008

SOURCE: Phillips magnavox tv/vcr combo need codes to program remote

most universal remote controls will not operate the combo type units. Contact www.remotes.com for a repoacement remote.

Posted on Nov 26, 2008

SOURCE: I need the codes for a Phillips TV/VCR combo and

  • Collect together the manuals or model numbers of all the items you want the universal remote to control. You will need to know manufacturer's name and the model number of the product. You will also need the owner's manual for the Universal Remote

  • Find the codes for the devices that you want to operate. The codes are located in the Owner's manual for your remote. Be sure to match the codes up with the exact model number of the item that you are trying to operate. Each item must be set up and programmed into the remote individually.

  • Program the devices by this guideline for the process. These will be different with each model of remote chosen but this is the general procedure, so you know what to expect. To program a TV into the remote perform the following: Press and hold the code button on the remote until it stops flashing. Press and release the Code button and select the device this is for, and enter the three digit code for the manufacturer and model number of your device. With the device on, press the Channel UP key and see if the channel changes. You are done with that device if the channel changes. Repeat the process for each of the other devices.

  • Posted on Nov 07, 2010

    • 1 Answer

    SOURCE: I cant program a phillips universal remote to my tv/dvd/vcr combo

    Shoot both philips remote and emerson tv.... then light cig and calm down.

    Posted on Apr 11, 2012

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    3 Answers

    I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


    Remote Control Support - RCA ' Made for Moments

    www.rca.com/support-remotes

    RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

    RCA Universal Remote Control- Target Programming ...

    www.thompsontv.com/rcarc.html
    RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

    Program an RCA Universal Remote Without a "Code Search ...

    www.wikihow.com > ... > TV and Home Audio > Television

    wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

    Jan 23, 2016 | RCA Remote Controls

    2 Answers

    I need code for philip s remote for a sayno ty


    Philips rca universal remote codes sayno vcr dvd combo ...

    www.fixya.com > ... > Remote Controls
    Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

    How to Reprogram a Philips Universal Remote Controller ...

    science.opposingviews.com > Computers

    Dec 21, 2015 | Philips Remote Controls

    2 Answers

    Need code for magnavox tv urc-4021boo


    Hi, the codes you have requested;

    Magnavox - 0054, 0706, 0030, 1454, 1254

    Instructions to program code:

    1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

    2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
    NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

    3. Press and hold SET until the LED (red light) blinks twice,then release SET.

    4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
    the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
    the same code again.

    5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

    Feb 12, 2011 | One For All URC-4021 Remote Control

    2 Answers

    I need code for URC-3220 Universal remote control for toshiba tv/vcr in one.


    I can help you reprogram your URC-3220 Universal Remote for your Toshiba TV/VCR Combo.

    The Toshiba TV/VCR Combo codes are 1145 & 0845.

    Please review my Fixya Tip posts for:

    TV/VCR/DVD Combo Codes
    Searching for the proper codes, or
    Downloading the URC-3220 users manual / owners guide.

    I hope that helps.

    Apr 07, 2010 | Universal Remote Control Remote Control

    1 Answer

    Can't get my Phillips universal remote to program my tv controls on my sv2000 t.v/dvd combo.


    If you already tried the tv codes for your make of tv, the manufacturer suggests using the dvd codes for your same tv make sometimes they use the dvd codes to activate or control the tv on some of those tv/dvd combos. If all this fails you can always use the code search procedure described in your remote's manual, but you need to be patient because this procedure will scan thru all the programmed codes(vcr,dvd,sat,cabl etc.) one at the time.

    Jan 16, 2010 | Philips Universal PH301S Remote Control

    1 Answer

    Programming a remote


    The first site is Phillips support you need the model number...enter it at this site the other (later) is a code page I found but no model number makes it harder...let me know the model number if none of these help....thanks for rating my effort...The Fang


    http://www.urc.philips.com/


    htttp://www.universal-remote.net/philipsmagnavox.html

    May 08, 2009 | Philips 5-Device Universal Learning Remote...

    1 Answer

    Phillips magnavox tv/vcr combo need codes to program remote


    most universal remote controls will not operate the combo type units. Contact www.remotes.com for a repoacement remote.

    Nov 24, 2008 | RCA Universal Remote Control

    2 Answers

    Programing rca remote for dvd/vcr combo


    all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go

    Feb 04, 2008 | RCA Universal Remote 3 Device Remote...

    2 Answers

    I cant program a phillips universal remote to my tv/dvd/vcr combo


    Shoot both philips remote and emerson tv.... then light cig and calm down.

    Dec 05, 2007 | Philips Magnavox Learning Universal Remote

    6 Answers

    Remote control code for magnavox dvd/vcr combo


    I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

    Sep 07, 2007 | Philips Magnavox Learning Universal Remote

    Not finding what you are looking for?
    Remote Controls Logo

    Related Topics:

    290 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Remote Controls Experts

    The Knight
    The Knight

    Level 3 Expert

    68352 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Cindy Wells

    Level 3 Expert

    4759 Answers

    Are you a Remote Control Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...