In SAMSUNG CHAT3222, I CANNOT SET UP E-MAIL WIZARD. THE APP SAYS DNS NOT AVAILABLE. INTERNET IS OK. What should i do?

DNS is a wetting in your phone that allows you to send mail and to browse the internet

You need to set a DNS address in the phone settings. Set it to google DNS as 8.8.8.8 or search for open DNS.

Try the following:
1) Settings
SMTP (outgoing mail) Server for MTN: mail.mtn.co.za
NNTP (usenet) Server: unknown
Proxy/Cache Server: NONE
DNS Servers: Automatic

2)
You have a incoming which should be for example gmail.mtn.co.za and outgoing as mail.mtn.co.za and user name and password need to be the same as your gmail account

Good luck

just type in your e mail id and when an option shows up saying automatic wizard , click ok. then your e mail will be set up automatically.
and do vote my answer below with the thumbs symbol

Hi

Which internet service provider service you are using make a call to customer care and ask the DNS address, its like 212.72.... put the DNS manually in your network >Advance setting. and try again, your problem will fix.


Cheer

This step-by-step article describes how to install and configure DNS on your Windows Server 2003 computer.

Before You Start loadTOCNode(2, 'summary'); Before you start to configure your DNS, you must gather some basic information. Internic must approve some of this information for use on the Internet, but if you are configuring this server for internal use only, you can decide what names and IP addresses to use.

You must have the following information:

• Your domain name (approved by Internic).
• The IP address and host name of each server that you want to provide name resolution for.

Note: The servers may be your mail servers, public access servers, FTP servers, WWW servers, and others.

Before you configure your computer as a DNS, verify that the following conditions are true:

• Your operating system is configured correctly. In the Windows Server 2003 family, the DNS service depends on the correct configuration of the operating system and its services, such as TCP/IP. If you have a new installation of a Windows Server 2003 operating system, then you can use the default service settings. You do not have to take additional action.
• You have allocated all the available disk space.
• All the existing disk volumes use the NTFS file system. FAT32 volumes are not secure, and they do not support file and folder compression, disk quotas, file encryption, or individual file permissions

Install DNS loadTOCNode(2, 'summary');

1. Open Windows Components Wizard. To do so, use the following steps:
   1. Click Start, click Control Panel, and then click Add or Remove Programs.
   2. Click Add/Remove Windows Components.
2. In Components, select the Networking Services check box, and then click Details.
3. InSubcomponents of Networking Services, select the Domain Name System (DNS) check box, click OK, and then click Next.
4. If you are prompted, in Copy files from, type the full path of the distribution files, and then click OK.

Configure DNS loadTOCNode(2, 'summary');

1. Start the Configure Your Server Wizard. To do so, click Start, point to All Programs, point to Administrative Tools, and then click Configure Your Server Wizard.
2. On the Server Role page, click DNS server, and then click Next.
3. On the Summary of Selections page, view and confirm the options that you have selected. The following items should appear on this page:
   • Install DNS
   • Run the Configure a DNS Wizard to configure DNS
   If the Summary of Selections page lists these two items, click Next. If the Summary of Selections page does not list these two items, click Back to return to the Server Role page, click DNS, and then click Next.
4. When the Configure Your Server Wizard installs the DNS service, it first determines whether the IP address for this server is static or is configured automatically. If your server is currently configured to obtain its IP address automatically, the Configuring Components page of the Windows Components Wizard prompts you to configure this server with a static IP address. To do so:
   1. In the Local Area Connection Properties dialog box, click Internet Protocol (TCP/IP), and then click Properties.
   2. In the Internet Protocols (TCP/IP) Properties dialog box, click Use the following IP address, and then type the static IP address, subnet mask, and default gateway for this server.
   3. In Preferred DNS, type the IP address of this server.
   4. In Alternate DNS, type the IP address of another internal DNS server, or leave this box blank.
   5. When you finish setting up the static addresses for your DNS, click OK, and then click Close.
5. After you click Close, the Configure a DNS Server Wizard starts. In the wizard, follow these steps:
   1. On the Select Configuration Action page, select the Create a forward lookup zone check box, and then click Next.
   2. To specify that this DNS hosts a DNS zone that contains DNS resource records for your network resources, on the Primary Server Location page, click This server maintains the zone, and then click Next.
   3. On the Zone Name page, in Zone name, specify the name of the DNS zone for your network, and then click Next. The name of the zone is the same as the name of the DNS domain for your small organization or branch office.
   4. On the Dynamic Update page, click Allow both nonsecure and secure dynamic updates, and then click Next. This makes sure that the DNS resource records for the resources in your network update automatically.
   5. On the Forwarders page, click Yes, it should forward queries to DNS servers with the following IP addresses, and then click Next. When you select this configuration, you forward all DNS queries for DNS names outside your network to a DNS at either your ISP or central office. Type one or more IP addresses that either your ISP or central office DNS servers use.
   6. On the Completing the Configure a DNS Wizard page of the Configure a DNS Wizard, you can click Back to change any of the settings. To apply your selections, click Finish.

After you finish the Configure a DNS Wizard, the Configure Your Server Wizard displays the This Server is Now a DNS Server page. To review all the changes that you made to your server in the Configure Your Server Wizard or to make sure that a new role was installed successfully, click Configure Your Server log. The Configure Your Server Wizard log is located at %systemroot%\Debug\Configure Your Server.log. To close the Configure Your Server Wizard, click Finish.

-----------please let me know if this guideline helps-------------

do not change the settings of your mobile, the service provider will be the one manage all sent and receive messages be sure GPRS is activated better reset your phone and start, configuring your setting on facebook you just need to enter your mobile number in facebook start sending and receiving messages.

Hi, there a usual cause for a DNS error is either a faulty connection/bad internet connection from your ISP/settings on your router.
First of all you need to determine which one is which? You may try this simple troubleshooting first:
Can your other computers or equipment connect to your router? If so, check the connections if they are on the right place and are connected finger tight.
Does your ISP have a stable connection? A good and stable connection is what you need to connect online. You may want to check your ISP regarding your current internet connection status. They may also have available settings for your game console.
This is most often a network issue and a not a hardware failure issue. Remember to check your network and rerun the set up wizard to make sure everything is set up properly.
Have a nice day!

Please make sure that you have data enabled on your phone!

For Set-Up Procedure follow these steps:-
1)Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports.
2)Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Ente
The Login window will prompt for the router configuration username and password.
The default username is “admin” and
the default password is “password”
3)Click Setup Wizard on the top left corner, Select Yes for the Setup Wizard to detect the type of internet connection and click Next.
4)The Setup Wizard will detect the type of Internet connection. For Cable Internet connections, Setup Wizard will detect Dynamic IP. Click Next
5)You do not have to change the default settings unless your ISP has given you specific DNS information which must be configured so smiply without changing anything click apply.
6)The router will now save these settings. When complete, you can verify whether you are connected to the internet from the Router Status > Maintenance menu.
7)Under Router Status you will have Internet Port , If you have the Ip Address Under Internet port you will have the wired connectivity then.

Link:-http://kb.netgear.com/app/answers/detail/a_id/119

Wireless Connectivity Steps:-
On the left hand side you will have the blue/purple column in their under the category you set-up you will see a sub-title wireless setting's, left click on that option and then do the setting's.This link will guide you how to do that:-
http://kb.netgear.com/app/answers/detail/a_id/112/related/1

Steps for Wireless Connectivity on MAC:-
1)Click on the apple icon on the left hand side of the start screen and go to system preferences.
2)Under system preferences a category name internet and network select the title network from there.
3)Under Network you will have an option for airport to turn it ON so do that and then below you will see list of networks available , from that list select the network you created , enter the password if it's secure one and you will be good to go from ther on and will have an internet access.

Your phone cannot establish a connection with your ISP.

OR

Your phone has no internet activated. Call your phone provider and make sure it is working properly.

Hi.

This problem usually occurs if DNS addresses are not set-up correctly.
DNS addresses are IP addresses of DNS servers which translates your queries to IP addresses. Like, when you enter www.google.com in your browser, computer sends this to DNS server, then DNS server gives back information of the address of the site you're trying to visit. Since your computer does not know where DNS server is, it cannot display your web page. Some programs like Messenger and Skype work by quering exact addresses (since they are made to connect to single database on Internet), and that's the reason they are connected to Internet.

1. Ask your Internet provider for DNS addresses.
2. Open Start menu and then Control Panel.
3. Open Network Connections.
4. Right-click the connection you are using to connect to Internet, and click Properties.
5. From the item list, choose Internet Protocol (TCP/IP).
6. Click Properties.
7. Click Use the following DNS server addresses.
8. Enter given addresses.
9. Click OK and then Close.

---
Your responses are intended to improve the level of service provided. Please rate your experience.