Question about Tasco Science & Laboratory

1 Answer

User's guide or instruction manual

Where can I find information on how to use and care for a microscope that I found

Posted by on

  • 1 more comment 
  • kjjagg Jul 31, 2008

    need instructions for tasco big screen mirco(30x,40x,60x,80x). my email is kjjagg@yahoo.com, Thanks, kjjagg

  • luckyfrog95 Feb 01, 2009

    can you also send me the instructions for the microscope?

    Thanks..my e-mail is semona_basin@hotmail.com

  • Cyndi Knobloch Sep 11, 2013

    I need the instructions or manual for the tasco 1200 zoom microscope if possible. cyndik@fumcbowie.org

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Hi,

I have a users manual for zeiss, but the principles are the same. The only way I can get it to you is via email. You need to post your email address here, and I will happily send you the file. (you will need adobe reader to read it) Hope this helps.

Kind regards.......Dave

Posted on Jul 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need dowland drivers to intel play model APB 24221 99A


Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions.

Note, DO NOT use the software from the CD that came with the microscope.
DO NOT plug in the QX3 microscope until Step 4.

Step 1. Download and install the QX3PLUS.EXE software from Intel:
http://tinyurl.com/QX3-Win7-Files

Step 2. Download and install the QCODINSTL.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 3. Download and extract the QX3 Drivers from:
http://tinyurl.com/QX3-Win7-Files

Step 4. Now, plug in the microscope.
When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps:
a. Click START - Select Devices & Printers
b. Right-click on the Intel QX3 Icon and select Properties
c. Click the Hardware tab - click Properties
d. Click Update Driver - select "Browse my computer for driver software"
e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully.

Before you run the QX3Plus program right click the icon, click on "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose in the drop-down box "Windows 98 / Windows ME". You should also check "Run as Administrator" if your account is a "Standard user".

Step 5. Now double-click on the QX3+ icon on the desktop and the program should run.
------------

Aug 13, 2014 | Intel Play QX3 Monocular Microscope

1 Answer

Windows 7 driver


Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions.

Note, DO NOT use the software from the CD that came with the microscope.
DO NOT plug in the QX3 microscope until Step 4.

Step 1. Download and install the QX3PLUS.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 2. Download and install the QCODINSTL.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 3. Download and extract the QX3 Drivers from:
http://tinyurl.com/QX3-Win7-Files

Step 4. Now, plug in the microscope.
When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps:
a. Click START - Select Devices & Printers
b. Right-click on the Intel QX3 Icon and select Properties
c. Click the Hardware tab - click Properties
d. Click Update Driver - select "Browse my computer for driver software"
e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully.
IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok".
Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run.
If you get a message that the microscope is not plugged in, quit and restart the program.
If the program hangs or crashes, reboot the computer, then restart the program.
------------
Comments and suggestions to mmehall [at] yahoo.com

------------

Jan 19, 2014 | Intel Play QX3 Monocular Microscope

1 Answer

Digital blue qx3 drivers


Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions.

Note, DO NOT use the software from the CD that came with the microscope.
DO NOT plug in the QX3 microscope until Step 4.

Step 1. Download and install the QX3PLUS.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 2. Download and install the QCODINSTL.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 3. Download and extract the QX3 Drivers from:
http://tinyurl.com/QX3-Win7-Files

Step 4. Now, plug in the microscope.
When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps:
a. Click START - Select Devices & Printers
b. Right-click on the Intel QX3 Icon and select Properties
c. Click the Hardware tab - click Properties
d. Click Update Driver - select "Browse my computer for driver software"
e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully.
IMPORTANT: Before you run the QX3Plus program for the first time, right click the "Intel Play QX3 Microscope" icon on the desktop, click "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose "Windows 98 / Windows ME" in the drop-down box. You should also check "Run as Administrator" if your account is a "Standard user". Click "Apply" then "Ok".
Step 5. Finally, double-click the "Intel Play QX3 Microscope" icon on the desktop and the program should run.
If you get a message that the microscope is not plugged in, quit and restart the program.
If the program hangs or crashes, reboot the computer, then restart the program.
------------
Comments and suggestions to mmehall [at] yahoo.com

------------

May 02, 2013 | Intel Play QX3 Monocular Microscope

1 Answer

I was given QX3, not QX5 software with instructions in German. My computer is windows 7. should I still install the two intel play disks which came with the computer microscope. Can I install it as...


Here are the instruction for installing the QX3 (or QX3+) Microscope with Vista and Windows 7. You must be using a 32-BIT VERSION. The QX3 is not compatible with 64-bit versions.

Note, DO NOT use the software from the CD that came with the microscope.
DO NOT plug in the QX3 microscope until Step 4.

Step 1. Download and install the QX3PLUS.EXE software from Intel:
http://tinyurl.com/QX3-Win7-Files

Step 2. Download and install the QCODINSTL.EXE software from:
http://tinyurl.com/QX3-Win7-Files

Step 3. Download and extract the QX3 Drivers from:
http://tinyurl.com/QX3-Win7-Files

Step 4. Now, plug in the microscope.
When the "Found New Hardware" wizard appears you will see a message saying that the driver installation was not successful. Click the Close box. You need to install the driver manually by following these steps:
a. Click START - Select Devices & Printers
b. Right-click on the Intel QX3 Icon and select Properties
c. Click the Hardware tab - click Properties
d. Click Update Driver - select "Browse my computer for driver software"
e. Browse to the folder with the extracted QX3 drivers from Step 3. above. The driver software should install successfully.

Before you run the QX3Plus program right click the icon, click on "Properties", click the "Compatibility" tab, check the box next to "Run this program in compatibility mode for:", then choose in the drop-down box "Windows 98 / Windows ME". You should also check "Run as Administrator" if your account is a "Standard user".
Step 5. Now double-click on the QX3+ icon on the desktop and the program should run.
------------

Mar 26, 2013 | Intel Play QX3 Monocular Microscope

1 Answer

Have bought a second hand qx5 with no instructions. Can you tell me where I can get the instructions from please?


The Quick Start Guide can be downloaded here:

QX5 Computer Microscope



Here are the links to the available downloads from Digital Blue:


QX5/Smithsonian Computer Microscope Drivers for WIN ME, 2000, XP, Vista 32-Bit

Download Drivers


QX5 V2 Computer Microscope Drivers for Windows Vista 64-Bit

Download for Windows Vista 64-Bit


QX5 V2 Computer Microscope Drivers for Windows 7

Download Windows 7 32-Bit

Download Windows 7 64-Bit


QX3, QX5 V1, QX5 V2 Computer Microscope for Mac OSX 10.4-10.6

Visit Webpage for Download


Aug 07, 2010 | Digital Blue QX5 Microscope

1 Answer

Radical Microscope for Christmas...no user manual


You don't need a specific microscope manual for that microscope, any old microscopy guide will do as at that level, all microscopes work pretty much the same way. Enjoy.

Dec 27, 2009 | Science & Laboratory

2 Answers

Need a reference manual for swift nine fifty microscope


Swift microscopes, as far as i know, don't readily come with a users manual like one would find for a standard home device. Nine fifties are of the simplest microscopes around, any guide to microscopy will do as a user's manual. As for repairs, anyone that is mechanically inclined and with the right tools (allen hex keys, screwdrivers, pliers, lubricant) will be able to fix one after a few minutes of tinkering with it. Don't panic.

Dec 15, 2008 | Swift Science & Laboratory

3 Answers

Need User's Manual of National Microscope #138


Hello--have you tried Ebay? and is there a Nat Op website where you might be able to get a free d'load? martin r

Aug 05, 2008 | National Optical 138-MS Monocular...

4 Answers

Microscope manual not complete (Imported by Innovage)


Unfortunatelt Blue Hat toys does not have an online presence at all. Here is a generic microscope manual:
THE MICROSCOPE

Aug 02, 2008 | Science & Laboratory

2 Answers

QX5 Problem with Windows Vista


Do not plug the QX5 in until the software is installed.

I got mine to work on Vista 32bit. Insert the cd, cancel autorun, view files on the cd. locate setup.exe, right-click on the setup and go to properties; then compatibility; then put a check in "run this program in compatibility mode for windows xp" AND put a check mark in "run this program as an administrator; the click Apply and click OK.

Right-click on the setup.exe again, this time choose, Run as Administrator.

Install away from the default. My recommendation is c:\users\(your user name\digitalblue.

Plug in the QX5, then go to Start, Programs, Digital Blue, click on QX5

Jun 10, 2008 | Digital Blue QX5 Microscope

Not finding what you are looking for?
Science & Laboratory Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tasco Science & Laboratory Experts

Ed Mac

Level 3 Expert

717 Answers

 Mikey
Mikey

Level 3 Expert

5000 Answers

William McMath

Level 2 Expert

168 Answers

Are you a Tasco Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...