Question about Computers & Internet

3 Answers

I have an emachines e3010,recently put my recovery disc in only to find that i have no drives to connect to the internet..ive looked on websites but i cant seem to find anything,tho im not really sure what im looking for. thank you .

Posted by on

  • milanpost Sep 01, 2008

    I have the same problem, i rebooted the computer and there are no drivers to conect to the internet (or any conection). The emachine support on the web is very bad and i can not find a place from where to download these drivers. I also can not find the CD as the computer came from the office from UK to Spain and the CD is lost somewhere. Cheers, good luck. Milan


×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Here is the customer care site they have all the drivers.

http://www.emachines.co.uk/em/customercare.do?ctx1w.att21k=2&LanguageISOCtxParam=en&sp=page11l&CountryISOCtxParam=UK&ctx1l.c2att1=17&rcond3l.attN2B2F2EEF=3624&rcond4l.attN2B2F2EEF=3912&CRC=99015199

Posted on Aug 10, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I am astounded by how poor the eMachines support is. I contacted their support via their support chat. After explaining that I had performed a system recovery and now the drivers for the intel integrated devices were missing I was informed that this could be resolved by performing a system recovery..... That's what caused the problem in the first place. I was also informed that, No, there are indeed no drivers available for their older systems. And that's it... I am currently searching for drivers by the device id. I'll report back if I find any links.

Posted on Feb 23, 2010

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Is it just your CD/DVD ROM drives that are missing or the Hard Drive/s too? If it's just the CD/DVD drives that are not showing up there is a fairly simple solution for forcing windows to recognize them again but I need more specifics concerning your problem to provide you a solution. await yoyur reply.

Posted on Jul 10, 2008

  • Scog Apr 02, 2014

    I think the OP meant drivers, not drives ;)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Restore my emachines w3507 back to factory settings how do i do it


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
If done properly the user should get to a screen similar to the below screen. Select the option for Safe mode command prompt only Windows Advanced Options Menu
Please select an option: Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode Start Windows Normally
Reboot
Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice. To perform a system restore, follow these steps: 1.Click Start, click Run, type msconfig, and then click OK. 2.On the General tab, click Launch System Restore. 3.Select Restore my computer to an earlier time, and then click Next. 4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information. 5.Select a system checkpoint or an installation restore point, and then click Next. 6.Close all other programs. 7.To start the system restore, click Next. 8.Your computer restarts. Repeat steps 1 through 8 until you fix your configuration issue.
or

It is possible for the Windows operating system on your eMachines computer to have a critical failure. If the operating system on your eMachines computer is failing, you can use your recovery discs to restore your computer. Recovery discs come with your purchase of an eMachine, and contain your operating system and all your basic drivers. You can recover your eMachines W series in about an hour.

Turn off your computer and press "F8" to enter the BIOS menu. Tab over to the "Boot Sequence" or "Boot Order" menu. Move your optical drive to the top of the list. Press "F11" to exit and save changes. Insert your recovery disc into your optical drive, then restart your computer. Press any key to boot from disc. Select the "Full Recovery" option from your recovery disc menu. Allow the recovery procedure to complete. Hope this helps.

Dec 28, 2012 | eMachines W3507 PC Desktop

2 Answers

Factory restore


If your particular eMachines model didn't come with recovery media or you just misplaced the disc, you don't want to be caught without a means to restore the operating system.


It's all too easy to accidentally download a virus or experience any number of problems that make your computer unstable.


However, there is an option for restoring your computer without the original recovery disc by using the pre-installed recovery software.


Use an external memory device such as a DVD, flash drive or external hard drive to back up the data you need to save from your eMachines computer.



Any data that isn't saved to an external source will be erased when the computer is restored to factory settings.



Remove any discs that are in the optical drive and unplug the computer's peripheral devices, such as an Ethernet cable or scanner.



Do not disconnect the keyboard, mouse or monitor.

Click the Windows "Start" menu and choose "All Programs."



Navigate to "eMachines" and choose "eMachines Recovery Management." Click the "Restore" tab.



Click "Password Settings" if you have not already set a recovery password. Type a new password in the text box and click "OK." Click "Restore System to Factory Default."



Type the recovery password and click "OK." Click "Next" to wipe the eMachines computer's hard drive and begin the recovery process.



Select "Finish" and wait for the eMachines computer to restart.



Use the series of installation prompts that appear on the screen to create a new user account for your operating system, set the system date and time, and set up your internet settings.



hope this helps

Sep 21, 2012 | eMachines T2862 Desktop PC 2.66 GHz...

1 Answer

My son put a fujitsu siemens recovery disc into his emachines d620 laptop now when i log on it asks for a fujitsu siemens activation key which i dont have or want so i have to use laptop with reduced...


Do you have the eMachines recovery disc? If so, then you need to enter the bios of the laptop by pressing a speciffic key at the start of the boot process. It should tell you what key to press in the POST. Most likely across the bottom of the screen somewhere. The F2 and F10 keys are popular as well as the Delete key. Once you get into the BIOS, Locate the menu containing the boot sequence. Make sure to set the CD/DVD drive as the first boot device. Save the changes and exit the BIOS. Put the Recovery or Windows CD/DVD in the drive and follow the on-screen instructions.

Mar 17, 2011 | Computers & Internet

1 Answer

Hello, my son has a emachines c6207. His hard drive died, I cant find the recovery discs. I was going to buy the same 160gb/hard drive from Western Digital. Looks like 3 screws and some plug ins. I was...


I have seen on ebay XP for sale as a brand new disk and un used for half that price as with the Hard Drives.
Don't commit to something that may not even work or even be illegal!

Feb 18, 2011 | E-Machines eMachines Desktop PC

1 Answer

I have a emachine t5254, had a virus, went black screen, had a friend take a look and got it back it will work, but it now has windows 7 instead of vista, which I didn't ask for, Now the internet is either...


you can order a recovery disc by contacting a emachines it will cost you 20 $ , seems like the recovery partition is wiped off along with the virus .

Jan 26, 2011 | Computers & Internet

1 Answer

I was trying to create the Recovery Management disk but everytime I try to burn the CD it keeps ejecting. I would really like it if you could provide some help. I recently bought this E-Machine computer...


Welcome to Fixya

Please see procedure below on how to create recovery disk. Let me know if smae thing will happen.

  • 1

    Click the "Start" icon on the Windows Vista home screen. Select "eMachines," then click "eMachines Recovery Management." The eMachines Recovery Management program opens.

  • 2

    Click "Create Factory Default Disc." The program will tell you how many discs you will need. Make sure the correct optical drive is selected, then insert a blank disc into that drive. Click "Start" to begin the burning process.

  • 3

    Remove the disc when it is finished burning and label it "Recovery CD 1." Insert the next the next blank disc if one is required. Click "OK" to begin burning the next disc. Repeat this step until all of the discs have been created and labeled. Close the eMachines Recovery Management program, insert the system CD that came with the laptop and restart the laptop.

  • 4

    Press "F12" repeatedly when the eMachines logo is displayed on the screen to be redirected to the Boot menu. Select the optical drive, then press "Enter."

  • 5

    Insert Recovery CD 1 when you are prompted to insert the recovery disc. The eMachines Recovery Management program will open.

  • 6

    Click the "Restore" tab in the list on the left side of the eMachines Recovery Management program window, then select "Completely Restore System to Factory Defaults." The computer automatically restarts and the recovery process begins. Insert any additional recovery discs as requested. The computer will reboot automatically when the laptop has been recovered to its original factory default settings, and you will be taken to the Windows Setup screen.

  • 7

    Set up Windows Vista with your own personal settings.


  • Thank you for using Fixya!

    Dec 04, 2010 | E-Machines emachines (emachinees) CD-ROM...

    1 Answer

    Accessing EMachines W3107 Recovery Partion


    You can fix this virus without recovering.

    Log in normally. Go to run, type in msconfig and go to the startup tab. Uncheck everything and reboot your pc. Once there try your internet. If it's not working go to Internet Options, Connections, Lan Settings, and uncheck anything in your proxy settings. Close IE and reopen. You should be able to connect. Then download and run Malwarebytes, and then run Bitdefender Online scanner.

    The only other thing that may be trouble is that there may be a rootkit that neither scanner will detect. You can run Combofix, but this program isn't for the average user. Follow instructions carefully when using Combofix.

    Mar 23, 2009 | E-Machines eMachines Desktop PC

    1 Answer

    Cant connect to internet


    ok what kind of internet connection are you trying to use.Is it DSL Cable if yes then contact your hardware manufacturer of the computer and then call the Internet service provider.Try another disc as well.

    May 28, 2008 | E-Machines eMachines Desktop PC

    1 Answer

    Cant get internet


    ok call your computer manufacturer let them no ,then call your internet service provider and also try to use any other disc.

    May 28, 2008 | E-Machines eMachines Desktop PC

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    979 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...