Question about Panasonic PT-47WX49 47" Rear Projection Television

1 Answer

Hewhen lp when i press the power button on my panasonic pt47wx53g tv,nothing comes up, the red light blinks 3 times pause then blinks 3 times and so on. any ideas? thanx

Posted by on

  • Sue Yan Jul 18, 2008

    I have no picture on my Panasonic 53 in projection TV. I get 3 blinking lights, a pause, then 3 blinking light

  • locbk Jul 18, 2008

    red button flashes 3 times. Unplug the unit and it works for about ten minutes and goes out again/ Panasonic 47 inch pt4i7wx47

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,617 Answers

The convergence ICs need to be replaced. # blinks is the error code for the convergence. You will need two STK392-110 Convergence ICs you can get replacement ICs at the following link with free shipping and free instalation instructions with pictures.
http://servicemanuals.vstore.ca/

Posted on Jul 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code 13 on mitsubishi wd52628


wait for the light to go out then press power. Then if it doesnt power up hold the menu and the Device/input buttons on the set both in together for 5 seconds the light will blink a series of blinks pause briefly then blink another number of blinks then pause then it will repeat the same two digit blink sequence a few times . Let me know the two digit blink sequence.

Aug 29, 2012 | Mitsubishi WD-52628 52" Projection HDTV

2 Answers

Red light flashing, tv wont turn on


need the model number of the panasonic and also how many times it is blinking. The blinking is an error code.

Aug 03, 2012 | Panasonic Projection Televisions

1 Answer

Tv will not turn on. red light on front of tv next to on/off button blinks


COUNT THE BLINKS.

3 BLINKS AND A PAUSE AND 3 BLINKS IS MOST COMMON.

5 BLINKS AND A PAUSE AND 5 BLINKS IS ALSO COMMON.

let me know the error code (blinks) and I will tell you what it means.

SD TECH

Jun 10, 2010 | Panasonic PT-53WX42 53" Rear Projection...

2 Answers

What are the error codes for a Panasonic PT-47WX 42 TV


Hi,
3 times LED blinks in Panasonic PT-47WX42 shows problem with convergence out chips failure as this tv has two big black ICs STK392-110 as convergence output, replace them to fix tv problem.
Click Part Store to see an image of required chip and price info.
Local tv tech is recommended if you have no experience of working in tv circuit boards.
Thanks.


Apr 18, 2010 | Panasonic PT-47WX53 47" Rear Projection...

2 Answers

I try to turn on the tv and the green light just blinks, nothing happens. After a few minutes it shuts off and the red light blinks two times and pauses. The red light blinks until I disconect from the...


If the front power light is blinking three times then your TV has a problem with the convergence. You can get the correct replacement parts and full step by step photo instructions from www.TvRepairKits.com

Dec 06, 2009 | Panasonic PT-56LCZ70 56" HDTV

1 Answer

Tv will not turn on and there is a red light that keeps blinking in the front of the tv. buy the power button. It was working great when we went to bed and the next morning the tv would not come on.


COUNT THE BLINKS---the SET will usually have a blink or error code----3 blinks and a pause is most common on this PT-47WX49 model.

Confirm model number to me and how many blinks and I will try to tell you what is wrong.

I hope you find 3 blinks, pause 3 blinks as that is the most easy for repair--it is short protection and usually means a problem in the set's CONVERGENCE circuit.

If this information helped you, rate this solution as I do this here for free.

SD TECH

Nov 08, 2009 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Panasonic PT-56WX33/red light blinks 3 times ovr-n-ovr


It's one of two things, a bad chipset, or bad lamp. 200-250 repair. Hope this helps

Jul 07, 2009 | Panasonic PT-56WX53 53" Rear Projection...

1 Answer

Panasonic PT-53TW53G


If the front power light is blinking three times then your TV has a problem with the convergence. You can get the correct replacement parts and full step by step photo instructions from www.TvRepairKits.com

Aug 17, 2008 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

TV not staying on


I called a tech and it was a convergence issue. It cost $375 to fix.

Jul 05, 2008 | Panasonic PT-51HX42 51" Rear Projection...

1 Answer

My Panasonic PT- 50LC13 doesn't turn on


Your service manual on page 82 steps you through decoding the blinking
1) there are two lights on the front near the reciever of the remote signals (Temp indicator and Lamp Indicator)
2) If the Temp indicator is on then they recommend you contact a service center
3) If the Lamp indicator is on and the power light stays on (no blinking) then you need to replace the lamp. Otherwise it says to contact the service center.
4) Counting blinks with the lamp indicator (1 every 5sec - lamp will not light or is abnormal, 2 every 5sec - lamp voltage is abnormal, 3 every 5sec - lamp temp is too high, 4 every 5sec - other error)

Apr 26, 2008 | Panasonic PT-50LC13 50" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...