My kemore 80 series gas dryer does spin but it heats up whats the problem

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

could be the igniter or thermal fuse if you hear the gas valve click open and there is no glow inspect the igniter for a hot spot or white spot where the brek occured,some dryer will spin but not heat up if the thermal fuse is blown

The belt around the drum has come off or broke. The front of your dryer will have to come off to inspect

that is ur glow bar or igniotror that is common,, check ur ignitor, thermal fuse, or secondary gas coils, those are what are usually wrong with no heat on gas dryers

Kenmore Dryers are all almost the same therefore am sending this;

http://www.youtube.com/watch?v=lHkIK8oy1K4

How to Clean a Dryer Vent Video

http://www.youtube.com/watch?v=5Dj4im31lRY&feature=related

Why is so inportant to clean the lint?

http://www.youtube.com/watch?v=9kxbF31Oh4s&NR=1

It was helpful?

if you ran this unit awhile without timer advancing,,now you blew the thermal fuse,,,re place thermal fuse and timer..

suspect coils bad on burner valve after heating up first time will sometimes fail on following fire ups

ck the thermo fuse then ck the gas valve for power and the igniter to see if its broken probley igniter if you dont see a glow comeing from it