Question about Dryers

1 Answer

Replacing dryer belt on Maytag

My belt broke on my maytag dryer model number dg410 and I need to replace it. I need step by step instructions on how to open the machine up, replace the belt and then close the machine back up. Can you help

Posted by on

  • Anonymous Mar 29, 2014

    How to replace engine belts on mj triton 4x4 2.6 94 model

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 160 Answers

I would take off the cover, it might be reg or star type screws and look at this page
http://www.partselect.com/ModelFrames.aspx?ModelID=64957&ModelNum=DG410&mfgModelNum=&ManufactureID=1&Selected=36056&Position=6&mfg=Maytag&Type=&Mark=6

Posted on Jul 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace belt in Maytag dryer DE512


Hello

Watch this youtube video it will show you step by step how to replace the belt

http://youtu.be/6ufArteqWXk

Jul 23, 2011 | Dryers

1 Answer

Belt installation is too loose on Maytag dryer model # pye2300ayw? Trying to fix it need a diagram??


Hi and welcome to FixYa, I am Kelly.
If the belt is loose it is most likely stretched / worn and should be replaced:

The idler (item5) of this drawing:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=46651&diagram_id=630165#d630165

See routing here: http://www.repair-help.com/kb/index.php?article=105

The drive belt is item 5 this link:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=46651&diagram_id=695560#d695560

The top must be opened and the front panel removed to install the belt.
Here is a link to step by step "how to" instructions.
http://www.ehow.co.uk/how_7277908_do-belt-maytag-pye2300ayw-dryer_.html

Make sure to inspect the rear drum rollers while you have the dryer open. Item 7 this link:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=46651&diagram_id=695560#d695560
Flat drum rollers or hard to turn rollers will cause the new belt to fail prematurely.

Additionally if the front or rear drum seals are worn it can cause the belt to be loose. These are glued on with high temp adhesive.
The front seal is item 10 this link:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=46651&diagram_id=28505910#d28505910

The rear seal is item 2 this link:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=46651&diagram_id=28505913#d28505913

High temp adhesive: http://www.appliancepartspros.com/part_details.aspx?part_id=4284239

By replacing the items above your dryer will operate like new again and extend the life of your dryer by many years.

Thanks for choosing FixYa,
Kelly

Apr 07, 2011 | Maytag Dryers

1 Answer

1991 Maytag dryer Model #LD 68424AAL Serial # A0190126HY


Are you sure that you hooked the belt up correctly, as it sounds like you may have missed the tensioner pulley. As this will tighten the belt around the middle of the drum

Jul 20, 2010 | Maytag Dryers

1 Answer

The belt broke on my maytag dryer. how do i replace/repair it?


Try this link. I am assuming your model number is MED6300TQ though it is not mentioned in your text (but it's on the image on the side).

Aug 23, 2009 | Maytag MED6300TQ Electric Dryer

1 Answer

Replacing the belt for Maytag Atlantis Dryer Model MDE7600AYW. What steps do I follow ??


The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Jun 10, 2009 | Maytag Atlantis MDE7400AY Electric Dryer

1 Answer

I think belt broke need to replace


Go to maytag.com then service and parts then use and care manuals then model no. hopefully you can find info. there if not call customer care 800 number. Most times you have to remove the top of dryer then the front to get to the belt. You will have to locate what type fasteners it uses some use a snap lock type fastener others use screws.

Apr 07, 2009 | Maytag Dryers

3 Answers

I need instructions to install belt on my clothes dryer Model no.lde9304ace


HI,

Please CLIcK HERE all the steps are given including pics to install a belt on your dryer.

Jul 23, 2008 | Maytag Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...