Question about Linksys Wireless-G WRT54G Router

1 Answer

How to remember my wep

I have forgot to save my pass i am tring to set up xbox live and i have connection but it will not let me in with out password is there a wayw to find this WEP KEY after it is lost???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 143 Answers

Yes, there is a way. just follow the steps below.

- open a web browser and enter http://192.168.1.1 on the address bar. it'll prompt you for a username and password, just leave the username blank and the default password is "admin"
- it'll prompt you with a linksys screen, go to the "wireless" tab near the "setup" tab. then look for "wireless security" subtab just under the "wireless" tab. it'll give you now your wep keys. copy key 1 and enter it on your xbox live

hope this'll help you and just ask me if you'll have other concern


ciao!

Posted on Jul 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Setup 64bit pass phrase on Belkin router. All wireless devices say,


Do your other devices support 64bit wep, and are you selecting that as your encryption type on each device. For example I know on my cellphone I have to specify the type of encryption that is used. You might also log into the router, just to double check the encryption type and the pass phrase (even if you are spelling it right).

Jan 31, 2012 | Belkin Routers

1 Answer

I dnt know my WPA passphrase for my xbox live and now i cnt connect.


Theencryption key secures your data from unauthorized access. The router's password is a Passphrase or the WEP or WPA orWPA2 encryption key. The Passphrase generates the WEP or WPA or WPA2 encryptionkey and this is in the router's wireless settings. To connect to your wireless router, configure the router'swireless settings ie SSID, plus the WPAor WPA2 encryption key and then configure wireless cards in the Xbox, laptops and orcomputers with these router's wireless settings. Then the Xbox, laptops and desktopcomputers can communicate with your wireless router.

May 28, 2011 | Zhone (6218-I2-200) Router

1 Answer

My xbox 360 says im connected to xbox live checked network setings and it says xb ox live is up and running...however when i try to play need for speed online..it says xbox live not working functionally?...


Turn on the console and navigate to the wireless settings screen. On the Xbox, the menu path is "Settings -> Network Settings -> Advanced -> Wireless -> Settings" On the Xbox 360, the menu path is "System -> Network Settings -> Edit Settings." Set the SSID (network name) on the Xbox to match that of the wireless router. If your wireless router has enabled SSID broadcast, the SSID name should appear pre-selected on the Xbox display. Otherwise, select the "Specify Unlisted Network" option and enter the SSID there. Specify "Infrastructure" as the Network Mode. (Infrastructure is the mode used by wireless routers.) Set the Security Type to match that of the wireless router. If your router uses WPA encryption and the type of adapter connected to the Xbox does not support WPA, you will need to change your router settings to use WEP encryption instead. Note that the standard Microsoft Xbox 360 Wireless Network Adapter supports WPA while the standard Microsoft Xbox Wireless Adapter (MN-740) only supports WEP. Save your settings and verify the network is functional. On the Xbox, the Wireless Status screen displays whether a connection has successfully been made with the wireless router, and the Connect Status screen displays whether a connection has successfully been made through the Internet to Xbox Live. On the Xbox 360, use the "Test Xbox Live Connection" option instead.
If you need more help post back! Thumbs and testimonial are welcome!

Jan 15, 2011 | Routers

1 Answer

Cant connect Xbox 360 to this wireless router


Turn on the console and navigate to the wireless settings screen. On the Xbox, the menu path is "Settings -> Network Settings -> Advanced -> Wireless -> Settings" On the Xbox 360, the menu path is "System -> Network Settings -> Edit Settings." Set the SSID (network name) on the Xbox to match that of the wireless router. If your wireless router has enabled SSID broadcast, the SSID name should appear pre-selected on the Xbox display. Otherwise, select the "Specify Unlisted Network" option and enter the SSID there. Specify "Infrastructure" as the Network Mode. (Infrastructure is the mode used by wireless routers.) Set the Security Type to match that of the wireless router. If your router uses WPA encryption and the type of adapter connected to the Xbox does not support WPA, you will need to change your router settings to use WEP encryption instead. Note that the standard Microsoft Xbox 360 Wireless Network Adapter supports WPA while the standard Microsoft Xbox Wireless Adapter (MN-740) only supports WEP. Save your settings and verify the network is functional. On the Xbox, the Wireless Status screen displays whether a connection has successfully been made with the wireless router, and the Connect Status screen displays whether a connection has successfully been made through the Internet to Xbox Live. On the Xbox 360, use the "Test Xbox Live Connection" option instead.
If you need more help post back! Thumbs and testimonial are welcome!

Jan 15, 2011 | Linksys WRT160N Wireless Router

1 Answer

Unable to connect xbox as I dont remember my wep key. thanks


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Oct 08, 2010 | Belkin Routers

1 Answer

I can not get my ipod to connect to wifi what do i


1. access your router's GUI:
click on internet explorer, type in the address bar: 192.168.1.254, then click on GO or ENTER
it will bring up NETWORK AT A GLANCE PAGE OR THE GUI
now at the top page click on HOME NETWORK, then click on WIRELESS SETTINGS or EDIT STTINGS (it'll asked you to enter a system password. if you cant remember it just click on 'I forgot my password and it'll give you a clue. and f you still cant remember you can click on 'I still cant remember my password and this this time it'll allows you to change it but first you have to enter the sytsem key that can be found at the bottom part of the modem under the bar code the one inside the parenthesis its a total of 10 numbers)
Now, just click on home network and wireless settings again then it'll bring up IDENTIFY NETWORK PAGE.
change the network name to your last name or any name, then for the wireless channel, change it to 10, make sure its WEP-OPEN, then select use custom pass phrase then enter 10 numbers that would serve as your wireless pw. then at the bottom part find power setting then change it to 10, then clicked on SAVE.
now on your ipod try to find the network name the you created then if it asked you for the wep key or pw...that's gonna be the 10numbers that you're about to create on the GUI.

Feb 02, 2010 | 2wire 2700HG-B Router (2700HGB)

1 Answer

I forgot the passwpord for my wireless network.


Using your web browser, go to the address "192.168.1.1", and login to your router setup. Typically (with Netgear), the login is "admin", and so is the password (or it is left blank). Under setup, go to "Wireless Settings", and at the bottom you will see "Security Options" (WEP, etc). This is where you set your passphrase, so set it to something you can remember (it should also show you the current one, too). That is the WEP password you'll need for your Mac and Ipod. Save your settings and exit.

Cheers
Nick

Dec 04, 2008 | NetGear WGR614 Wireless Router

2 Answers

XBOX Live problems with Belkin N1 router


I suggest setting this up with a WPA encryption rather than WEP encryption. This should get ya setup without a problem. Also, I've noticed live to be a bit buggy since Christmas. If you continue to have troubles after trying this call 800-4my-xbox. The recording will tell you if they are having network issues.

I bet this helps!

Dec 31, 2007 | Routers

Not finding what you are looking for?
Linksys Wireless-G WRT54G Router Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...