Question about Televison & Video

1 Answer

I have an RCA rear projection TC (55 inch wide screen). A few nights ago, I fell asleep with the TV on and I awoke to a bang. I noticed the tv was on with sound but no picture. I shut the TV off and went to bed. The next morning I turned the tv on and the sensor buttons (blue in color) for the power, channel, volume, were blinking but the tv did not come on although the power was on. The buttons blinked for several seconds and then stopped and the power went off. We unpluged the tv for a day hoping it would reset itself. After a couple of days, it is the same thing. The power goes on, all the buttons blink, then it shuts down. My husband thinks that the tv is struck on dvd or video and not tv (although noone put it on dvd or video as it was on tv when it stopped working in the first place). My son thinks that we need a new bulb. Does anyone know what the problem is and how we can fix it. Thank you in advance/

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

I will need the model number of your set in order to help you out with your problem. Please respond to this same post when replying

Posted on Jul 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I fell asleep with the tv on and when I awoke, the on/off red light just blinks and there is a "burning" odor


How many times does the light blink as thats an error code indicating which circuit has the problem. Let me know how many blinks and I will assist you with the problem.

Jun 13, 2011 | Sony KP-57WS500 57" Rear Projection...

1 Answer

Fell asleep with my rca projection tv on woke up to no picture But sound. I turned the tv off and unplugged and now when I turn it on I can here it powered up but no picture or sound. The power button...


Look for bad capaciotrs on the deflection board cp150 2200uf 16v use 25v(,cp114,cp120) bothe 220uf 35v,cp110 220uf 200v. Deflection board is the bottom lefthand side board that has FBT flyback Transfomer on it also resolder all the Pinns on the FBT.

Dec 04, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA D52W19 rear projection tv wont turn on


Try this. Change the channel of your TV to 3, do you see a picture, if not. Unplug your system for the TV. Turn off and unplug the TV. Leave it off for about 10 minutes so it can discharge. Turn back on the TV and see if it re-sets. If this does not work let me know. Give me a detailed report including any brand or models you are asking about. Hope this helps.
JimmyC

Oct 04, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

55 inch mitsubishi rear projection tv red lamp out of adjustment


Have convergence IC's replaced. I believe this unit uses STK-392-570 convergence IC's Only one has gone bad but replace them both, because if one has failed then the other is not far behind, for Blue and Green. One handles Red, One handles BLUE and Grn. There are only two of them in the set, They are the two largest IC's in the entire set.

Oct 01, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Swirling colors unwatchable screen RCA rear projection 52"


I will assume it does this no matter what the input is, It sounds like the board that controls the projection lamps is causing them to misfire? Or light up out of order in rapid succesion? you will probably need to have the TV serviced, or at least an estimate, so you canfigure out exactly what part has gone bad,( hard to tell sometimes when were not there), but be carefull if you decide to service it yourself.

Apr 12, 2009 | RCA P52926 52" Rear Projection Television

1 Answer

RCA P60921 Rear Projection TV


converge power supply small pcb about 3 inch by 7 inch with stk-730-xxx chip on it ..replace the chip

Oct 29, 2008 | RCA P60921 60" Rear Projection Television

3 Answers

RCA 52-inch (rear projection) big screen television


tv worked great, turned it off one day and back on the next and the on light would not come on nor would the tv work, rear projection 52 inch rca

Jun 18, 2008 | RCA P52926 52" Rear Projection Television

1 Answer

RCA 52" projection Model no. D52W19 produced 9/04


make sure you do not have the automatic screen mode set to wide screen on tv menu .Also if you have cable box set to wide mode only then the tv will only display wide mode.

Dec 05, 2007 | RCA P52937 52" Rear Projection Television

1 Answer

Won't turn on


tv chassis ctc 195 , hvt transformer, digital conv, power supply,

Dec 04, 2007 | RCA P46921 46" Rear Projection Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6355 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...