Question about NEC Replacment Lamp Projector Lamp for VT470&VT670 - 3000Hrs Eco/2000Hrs Std 180W [ VT75LP

1 Answer

NEC VT770 i replaced the lame and it still says lamp has has no life

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Go to MENU and clear Lamp Hours meter.

Posted on Apr 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it means of 6 seconds red light interval of my NEC MT1050 projector,and how will I fix it to come back to life?


Holding down the "OFF" key on the remote control for 30 seconds
to reset the lamp timer
Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Jun 13, 2014 | NEC MT850, MT1050, MT1055, MT1056...

1 Answer

How to reset lamp life nec u250x projector


menu -setting -reset lamp timer -enter -ok

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Oct 11, 2013 | NEC Lamp for U250X Projector

1 Answer

Cant clear lamp usage hours warning after replacing bulb on model NEC LT 157


Try holding the off button down for 20 seconds, it may be the on button. I had an NEC MT830 which had a standby function once it had reached and exceeded the lamp life safe limit. Once this had happened it wouldn't come out of stanby uinless the lamplife was reset. Your user manual should have the correct method of reset

Good luck, hope I was of assistance

Jul 14, 2011 | NEC LT157 Projector Lamp Module (50021668)...

1 Answer

My nec projecter lamp status is just red on and not working any idea


Usually the unit will go into permanant standby if the lamp life exceedes its safe limit. I had the MT830/1030. To reset it I had to press the off button down for upto 20seconds which resets the lamplife. If not the off button it was the on button.

Good luck

Jun 12, 2011 | NEC (MTLAMP820/1020) Projector Lamp for...

1 Answer

My NEC VT650 runs for about 15 mins then intensity of picture starts to reduce then comes back to full brilliance and does so for a few seconds and then the lamp switches off. Fan stays running. If I...


It could be the wrong lamp. Make sure that the lamp is original factory made. It may also be the lamp ballast which starts the lamp & keeps it burning steady.
Good luck,
Jim

Apr 15, 2011 | NEC VT650 OWIZ136606624901

1 Answer

What are the problems with the LT51LP? I have to replace ours about twice a year (costly). Otherwise no problem...


clean out your projector with canned air. the dust keeping in the heat and restricted air flow will shorten the life of the lamps.

Nov 12, 2009 | NEC LT51LP Projector Lamp for LT75Z, LT150

2 Answers

I have a NEC mt1055 and the unit just had new bulb put in here and it has the power and standby light come on and the fan doesn't turn on here and the standby light is yellow and status is red


The NEC’s work on a reducing time basis, they count the hours that they have been operational and refer to this as the life of the bulb – 1600 hours. When the 1600 hours has been reached the projector shuts itself down into standby mode never to be restarted even after changing the bulb / filters. This is because the unit needs to be reset, which needs to be done as follows (not included in any of the bulb replacement instructions):-
  • Plug Projector in so it is in standby mode – Orange light lit, Red status light lit (not flashing)
  • Using the remote control, hold down the power off button for 30-45 seconds
  • This will reset the status button, removing the red light
  • Power up the projector and select Menu
  • Select Projector Options
  • Select Set-up – a number of tabs will appear called pages
  • Arrow across the pages (MT850 is Page 5) until an option called “RESET LAMP HOURS” is shown
  • Move onto this option and press enter on the projector itself, confirm that you want to reset the counter
  • Projector is now back to life

This works for all NEC projectors, the page number may be different though where the “RESET LAMP HOURS” option resides.

Oct 07, 2009 | NEC MT850, MT1050, MT1055, MT1056...

1 Answer

VT440 NEC PROJECTOR


let it cool down then remove the lamp and see if it looks shattered or burnt- if it is you have solved your problem-change lamp!

May 27, 2009 | NEC (50019497) Projector Lamp for VT440,...

1 Answer

Lamp and user's manual for a NEC Multisynch MT Projector


The manual can be downloaded here: http://safemanuals.com/user-guide-instructions-owner-manual/NEC/MT600
The part number for the replacement lamp is MTLAMP600/800 and it may be ordered from www.partstore.com

Mar 02, 2009 | NEC (SPPL1063) Projector Lamp for MT600,...

Not finding what you are looking for?
Projector Accessories Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Projector Accessories Experts

M.R.C

Level 1 Expert

35 Answers

richie46

Level 3 Expert

6034 Answers

Lampdeng.com
Lampdeng.com

Level 2 Expert

729 Answers

Are you a NEC Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...