Question about Casio Parts Cash Register PC Desktop
Register has locked and cannot open.
It depends what is causing the lockup.
If you don't have anything on the display, then it is probably a printer jam. If you have anything at all on the display, then you can try a flag clear:
Turn the power off at the wall.
Turn the key to Program mode.
Hold down RECEIPT FEED button while turning on at the wall.
Wait 5 seconds
Let go of RECEIPT FEED
You should see 'FFFFFFFFF' on the display.
Turn the key back to Reg mode, and try it. You might have to log on to the machine if you normally use logon codes.
Posted on Jul 12, 2008
Tips for a great answer:
Nov 02, 2015 | Casio Parts Cash Register PC Desktop
Remove upper casework:
WARNING! - RISK OF ELECTRIC SHOCK.
Ensure power to the ECR is off and the power cord is disconnected before connecting the interface.
a. Locate the power switch and switch off the ECR. Also disconnect the ECR from the mains supply.
b. Unlock and remove the printer cover (by tilting it up from the front).
c. Remove keys from mode locks etc.
d. Remove the grey name-plate located half way down and to the left of the register.
e. Remove the single screw located behind the panel (bottom right of printer mechanism).
f. Push in the two tabs located either side of the register and slide the top cover forwards. The cover should now lift upwards, away from the register.
g. Move the top cover on to its side towards the right of the register (take care as there are still cables linking the top and bottom halves).
May 28, 2015 | Cash Registers & POS Equipment
Apr 15, 2015 | Cash Registers & POS Equipment
Mar 26, 2015 | Cash Registers & POS Equipment
Jan 31, 2015 | Casio Parts Cash Register PC Desktop
406 people viewed this question
Usually answered in minutes!