Question about RCA F32450 32" TV

1 Answer

Tv won't power on

If not the tube, what could it be? tried another outlet, didn't work. thx

Posted by on

  • kyoung191 Jul 12, 2008

    have a rca 32v 420t model tv. green power botton lights up but tv won't turn on. no sound and no picture.?????

    tried unplugging and different outlet and no change.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

Maybe the switch.

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Sylvania 6727DF TV and it won't turn on tried different outlet different remote checked the transistors I can't find what's wrong even the ohm's r weak on the cord


Contact any experienced service technician. Its main power regulator section has the fault. The work is a skilled one, and not a user repairable fault.

Aug 26, 2012 | Sylvania 6727DF TV

1 Answer

Blue screen. Won't get any channels, or picture. Tried programing. Didn't work


It sounds that the tuner is faulty. Befror confirm it, a through checkup is necessary. Seek tech support.

May 24, 2012 | Prima C2012 TV

2 Answers

When I plug the tv it won't turn on nor does the


The red light is usually one of the first things that is powered by the power supply of the set. If even this is not working the place to start diagnosis is in the power supply. If you are not a qualified technician taking safety precautions then please refer the repair to a professional TV repair shop.

Jul 18, 2011 | Panasonic Standard (CRT) Televisions

1 Answer

TV will not power on. prog timer flashers


Try connecting the TV directly to a different wall outlet and check. If the issue persists, try power resetting the TV. Turn Off the TV and remove the power plug from the wall outlet for 1 minute and reconnect it and check the operation. If the issue persists, then the TV requires service.

Jul 28, 2010 | Mitsubishi CS-35305 TV

1 Answer

Sony trinitron tube tv Standby is flashing and the tv wont turn on


Try connecting the TV directly to a different wall outlet and check. If the issue persists, try power resetting the TV. Turn Off the TV and remove the power plug from the wall outlet for 1 minute and reconnect it and check the operation. If the issue persists, then the TV requires service.

Jul 06, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

2 Answers

I currently have my KV-27FS120 Sony TV connected to a cable box, which is receicing 100% signal. However, my television when powered on, the picture will tend to flash at times for a half a second and then...


Check whether the issue occurs with all the external devices like DVD Player, VCR, etc. If the issue is occurring with all the devices then the issue is with the TV.
Try these steps to check whether the issue is resolved.
1.Disconnect the power cable and connect it to a different working wall outlet.
2. Disconnect surge protector if you are using any.
3.Power reset the TV by turning it OFF for atleast one minute.
3. Reset the TV to the Factory defaults.
To reset the TV, turn it ON.
Press the RESET button on the Remote and press the POWER button on the TV at the same time. Now, TV will turn OFF and then back ON automatically.
Now, proceed with the Auto Program.
Check whether the issue is resolved after the Auto Program is finished.

All Sony TVs have a self-diagnose mechanism where the Standby light blinks to indicate that there is an internal malfunction in it.

Note: Your TV does not have the replacable LAMP.

If the issue persists TV requires service. Contact nearest Sony authorized repair center,


Jul 22, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Sony wega tv was on and it shut itself off and we tried to reset power and the standby light is now blinking red 6 times with no picture.


Why not try this.

If it is a tube type.

1. Turn off the TV.
2. Disconnect it from the outlet.
3. Connect the power cord after 1 minute
4. Power the TV.

Mar 01, 2009 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

RCA 36' tube tv won't turn on


possible that a fuse blew while transferring tv, most like to happen despite care in handling if tv was on for a while, kind of like moving a light bulb that is hot and suddenly filament breaks when you move the bulb slightly. Other than that I'd say it's a good time to get a new tv just in time too for the digital transition.

Feb 06, 2009 | RCA F36450 36" TV

1 Answer

Sony KV36H5500 WEGA TV (flat screen tube) will not turn on


Pull the back Off Disconnect CRT board connected at End of picture tube then turn set on and see if it comes on with volume, high voltage you can feel front of tv for static elect.... Let me know what happens then i can tell you what is wrong with TV.

Dec 27, 2008 | Sony KV-32XBR85 TV

1 Answer

Sayno Tv


You didn"t say already working in AV mode or not. Suppose if it is worked means this is the simple one just change programme (-) button in TV front panel till becomes 1 or 0. After 1 or 0 again you press down the same button you get AV mode. Even you won"t get try in menu features to change AV mode. Even you won"t get there is a problem in Micom section. Technical persons only sort out your problem by changing EEPROM ic. I hope the above information is useful to you.

Sep 02, 2007 | Sanyo DS31520 31" TV

Not finding what you are looking for?
RCA F32450 32" TV Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68202 Answers

John mullen

Level 2 Expert

245 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...