Question about Samsung J700 Cellular Phone

1 Answer

What Is Network Failure - Samsung J700 Cellular Phone

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 554 Answers

A network which contains many network components of both hardware and software can incur failures due to one (or even multiple) of its contained components incurs a failure. Ranging from the largest to the smallest and from hardware to software, network failures can be divided into the following categories:

  • Control plane failure:this type of failure is mainly related to software, i.e., network control plane software. For example, in a GMPLS-based network which is made up of a control plane and data plane, the control plane failure would lose the control of the data plane, which means that we cannot establish new service connections, or terminate or modify an existing service connections within the data plane, even though the existing connections can still perform normally to carry user's data. In other type of networks such as IP networks, the control plane failure can be even more serious. For example, the pollution of IP lookup tables at some routers would cause all the IP traffic on these nodes difficult to be forwarded. Similar stories occur for viruses attacking IP routers. They disable the IP networks through disabling IP network control plane.
  • Subnetwork failure: this is a type failure occurred with a regional subnetwork that commonly shares a risk, e.g., a region that has high occurring frequency of earthquake. In addition, some large disasters such as flooding, tsunami, etc. can also disable a regional subnetwork.
  • Node failure: this is a type of failure occurred with a single network node. The reasons for this kind of failure include accidents or disasters at a network operational center, such as power shutdown due to fire, flooding, etc.
  • Network card failure: network card failure is a type of failure under the umbrella of the node failure type. Rather than the shutdown of the whole switch node, sometimes a failure can occur only with a network interface card. For example, the failures or faults such as a laser outage, fault of a circuit board, or software bugs, etc. can also contribute to a network card failure.
  • Link failure: link failure in general is the most common network failure that occurs due to fiber cut.
  • SRLG failure: SRLG failure is a generic concept to define all types of network failures whenever a common SRLG incurs a failure. Here a SRLG can be a fiber link, node, subnetwork, or control plane, etc.
  • Single failure and multiple failures: in general network failure implies a single network failure because network failure normally seldom occurs. However, under some situations, there can be more than failure occurring with a network. This kind of situation is called multiple failure, example, dual failures and triple failures. For a network, planning for full recovery of multiple failures generally requires much high protection capacity than that of purely for a single failure.

    Posted on Jan 04, 2011

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    When turning on it flashes ck cable. and cables are fine


    Possible connector issues or maybe hdd? Have you checked the bios for missing items?

    Mar 11, 2015 | Compaq Computers & Internet

    Tip

    Network failure types


    <span> <p>A network which contains many network components of both hardware and software can incur failures due to one (or even multiple) of its contained components incurs a failure. Ranging from the largest to the smallest and from hardware to software, network failures can be divided into the following categories:<br /> <li>Control plane failure:</b>this type of failure is mainly related to software, i.e., network control plane software. For example, in a GMPLS-based network which is made up of a control plane and data plane, the control plane failure would lose the control of the data plane, which means that we cannot establish new service connections, or terminate or modify an existing service connections within the data plane, even though the existing connections can still perform normally to carry user's data. In other type of networks such as IP networks, the control plane failure can be even more serious. For example, the pollution of IP lookup tables at some routers would cause all the IP traffic on these nodes difficult to be forwarded. Similar stories occur for viruses attacking IP routers. They disable the IP networks through disabling IP network control plane.</li> <li>Subnetwork failure: </b>this is a type failure occurred with a regional subnetwork that commonly shares a risk, e.g., a region that has high occurring frequency of earthquake. In addition, some large disasters such as flooding, tsunami, etc. can also disable a regional subnetwork.</li> <li>Node failure: </b>this is a type of failure occurred with a single network node. The reasons for this kind of failure include accidents or disasters at a network operational center, such as power shutdown due to fire, flooding, etc.</li> <li>Network card failure: </b>network card failure is a type of failure under the umbrella of the node failure type. Rather than the shutdown of the whole switch node, sometimes a failure can occur only with a network interface card. For example, the failures or faults such as a laser outage, fault of a circuit board, or software bugs, etc. can also contribute to a network card failure.</li> <li>Link failure: </b>link failure in general is the most common network failure that occurs due to fiber cut.</li> <li><a href="http://www.network-protection.net/shared-risk-link-group-srlg/">SRLG</a> failure: </b>SRLG failure is a generic concept to define all types of network failures whenever a common SRLG incurs a failure. Here a SRLG can be a fiber link, node, subnetwork, or control plane, etc.</li> <p>Single failure and multiple failures: in general network failure implies a single network failure because network failure normally seldom occurs. However, under some situations, there can be more than failure occurring with a network. This kind of situation is called multiple failure, example, dual failures and triple failures. For a network, planning for full recovery of multiple failures generally requires much high protection capacity than that of purely for a single failure.<br /></span>

    on Jan 04, 2011 | Cell Phones

    1 Answer

    How can I get my proscan tablet to connect to networks it keeps saying failure to connect


    Firstly try to use one network at a time.Utilize required software APP and proceure to recognise signal. please check if you have available DATA

    Dec 07, 2014 | Tablets & eReaders

    1 Answer

    PXE-E61 : media test failure, check For Realtek RTL8101E/8102E PCI-E Ethernet Controller v1.06 (080222) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM.


    The system is not finding any bootable media (Hard Drive) and is attempting to boot via the network card (PXE Boot) the error message is saying that there is not PXE network to boot from and it is exiting the process.
    Generally, this is caused by a hard Drive failure. Reseat the drive and or drive connections and see if the system will find the hard drive.
    Generally, a Hard drive failure

    Jun 17, 2011 | Computers & Internet

    1 Answer

    I have by cannon 6570i moddel ihave continew error {chek the network conection chek the tcp ip the defalt key is curruptedor invelid}


    1) Select the following service mode COPIER>TEST>NETWORK>PING, and select PING.
    2) Enter the IP addressof your PC using the numeric keys on the control panel, and press OK.
    3) Press the start key.
    - OK is displayed if Ping succeeds, but NG is displayed if it ends in failure.

    Perform this procedure only when connecting the machine to networks.
    If the machine fails to be connected to networks, any of the following causes is probable.
    a. Connection failure between networks and the machine
    b. TCP/IP setting failure of the machine
    c. User network failure
    d. Main controller PCB failure
    The detailed check methods are as follows.

    Checking with Loopback Address
    you can check whether TCP/IP settings of
    the machine are appropriate by executing Ping with this address.
    1) Enter the loopback address (127.0.0.1) in PING.
    - If NG is displayed, check TCP/IP settings of the machine again, and re-execute Ping.
    - If OK is displayed, perform the next check.
    Checking with Local Host Address
    The local host address is the IP address of the machine. Since the local host address returns in response to the network controller by executing Ping with the address, you can check whether the network controller (main controller PCB) is in a normal condition.
    1) Enter the IP address of the machine in PING.
    If NG is displayed, take the following actions, and re-execute Ping.
    - IP address error of the machine: Check to see again if the IP address settings of the machine are appropriate. Ask the system administrator whether the allocated IP address is valid.
    - Failure in the main controller PCB: Replace the main controller PCB
    If OK is displayed, a cause may be user's network environment. Inform the system administrator of the current situation, and ask for measures.

    Apr 16, 2011 | Canon imageRUNNER 5570 Copier

    1 Answer

    No network operator/no signal


    Possible failure of the trans receiver input, the network section.
    Since this is a hardware failure I request that you will need assistance from Nokia care to change the IC. Take estimate and decide.Avail the warranty if within the period.

    Oct 15, 2010 | Nokia 5800 XpressMusic Smartphone

    1 Answer

    Have a bizhub C353 conected to a network. Using a


    have a bizhub 250 trying to scan to pc via smb on a network. Keep getting login failure. Can you help

    Nov 12, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

    1 Answer

    When turning my laptop on i get a message media test failure


    You see this message when the laptop trying to boot from a remote server using the network card. If you didn’t see the PXE-E61 message before, it means that the network card was listed after the hard drive in the boot order (you can set the order in BIOS) and the laptop booted directly from the hard drive. Now, when the hard drive has failed, the laptop cannot detect it and tries to boot from the next available device – the network card. Your laptop is not configured to boot from a remote server using the network card, that’s why you are getting PXE-E61 Media test failure error. You have to replace the hard drive and reinstall the operating system.

    Jan 19, 2009 | Dell Inspiron 1501 Laptop

    1 Answer

    My phone shows network failure


    how do i transfer themes from Pc to mobile

    Jun 12, 2008 | Sony Ericsson W200i Cellular Phone

    1 Answer

    Network Failure for update version 1.82 for Ps3


    you have to diable, media server in your network settings. also if you want a chat invitatation to work both parties must disable it.

    Jun 29, 2007 | Sony Playstation 3 (PS3) Console

    Not finding what you are looking for?
    Samsung J700 Cellular Phone Logo

    448 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Samsung Cell Phones Experts

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    Fotis Papastamatiou

    Level 2 Expert

    96 Answers

    Bill Long

    Level 3 Expert

    587 Answers

    Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...