Question about Microwave Ovens

1 Answer

I have juicer from Jack lalanne company. The peg screw plastic plate is broken but motor works fine. Please help me. The model # CL-003AP. Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,909 Answers

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model 1630 new in 2000. Turntable will not rotate, it tries but will not rotate.


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Mar 23, 2011 | GE JVM1630 Microwave Oven

1 Answer

Turntable not rotating


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 26, 2011 | Neff Microwave Ovens

1 Answer

Black and decker microwave works fine except the table not turning. Few months earlier it stopped turning but started working again after few days by itself. This oven has convection facility also and it...


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 26, 2011 | Microwave Ovens

1 Answer

Timer works ,but when start is pushed the turntable doesn't turn


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 25, 2011 | KitchenAid Microwave Ovens

1 Answer

TURNTABLE QUIT ROTATING model #RSBG669T


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 25, 2011 | Microwave Ovens

1 Answer

Hi, We have a Sharp R-898M microwave that works ok but the turn table will not rotate. Can you help?


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 21, 2011 | Sharp R-820B Convection/Microwave Oven

1 Answer

NEED TO REPLACE MOTOR. NEED MANUAL ON HOW TO DO THIS


Replacement of the turntable motor should be carried out by a qualified appliance repair service.

YOUR SAFETY IS PARAMOUNT!

Attempt this only if you are competent.

But here is a basic method if you are mechanically minded and have electrical safety knowledge.

I am assuming the plastic coupler is not split or broken and causing the problem.

The motor assembly is fixed to the base of the oven usually with two screws and access is obtained usually by removing the inspection plate directly beneath the motor. It is usually a plug in synchronous motor that revolves at a few revs per minute but the plastic cogs in the motors gear box fail and the motor assembly must be replaced. They are fairly inexpensive and obtainable usually from a domestic appliance repair shop.
If you feel confident, disconnect it from the mains power, remove anything in the cavity and turn it upside down if it is a tabletop model, a little more complicated if it is built in!
Remove the inspection plate, sometimes it must be cut out with sharp cutters, and disconnect the motor. Remove the motor and go and get a new one. Fit the new motor and fit the inspection cover back on the base by turning it to fit and using an extra screw fix it then put the microwave back in its position. Plug it back in, with the turntable and plate. Put a cup of water on the plate inside of the oven and heat for 20 seconds to check the plate goes round.
Hope this helps.

Feb 07, 2011 | Microwave Ovens

1 Answer

Can Concord grapes be juiced with the Jack LaLanne juicer? Are the seeds to large and hard?


you can juice grapes but you will hav to put in another fruit thats hard like a carrot apple celery to push the juicer from grapes out

Aug 18, 2010 | Microwave Ovens

1 Answer

No response to power button


IT WAS NOT A MICROWAVE BUT A JACK LALANNE POWER JUICER YOU WERE NO NO NO NO HELP

Sep 18, 2009 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...