I dont know how to combine the cartridge in the printer

Replace color cartridge:Reason: Color cartridge carries three color for color combination, in that any one of color empty or dried up color combination wont happen perfectly, result printer get mismatch colors.. In your case it might be magenta color over.. replace color cartridge to get good print outs..

I would recommend that if you are purchasing compatible cartridges for the first time that you purchase a complete set. This is because the compatibles may not function combined with the original cartridges you received with your printer.

Some cartridges also need you to transfer the chip from the original cartridge.

Inkjet printers use a combination of inks to produce colors; while you may not realize it, your printer uses black ink to print colors as well, to darken the hue of a color. Otherwise, it would be limited to very "bright" colors. Replace the black cartridge, you will be fine.

A lot of printer manufactures place a small chip on the ink cartridge. Combined with the printer software it knows you re-filled the cartridge. This forces you to buy new ink. A work around that works with some printers. Keep you're old ink cartridges. Replace with new and when it empties replace with you're re-filled ink cartridge. Store you're old re-filled cartridges in a dry cool place when not in use. With HP printers users keep three cartridges.

Good luck.
Mike

You may want to try the series of steps required for "cleaning" the inside of the printer. Usually there are a combination of reset buttons that are used to clean a printer and it could take about 10 minutes. The Canon website usually has which combination of buttons will do that.

Hi,


This is single cartridge for black and color printing. With the combination of Yellow, Magenta and Cyan we get many colors including black. If you want to refill this color cartridge, you need refill ink.


For further assistance, visit;
http://www.oddparts.com/ink/l12a1980.htm


Regards;
Hassan

hi i dont have the tricolor cartridge in my hp 5610 and i want to work only with black cartridge and my printer says there is no cartridge on the left , is it posible to solve this problem and work with one cartridge only ? i can print but copy and fax doesnt work . thanx

Not knowing what sort of printer you have it's hard to pin-point exactly what the issue may be. Taking an educated guess I'm going to guess that you are using an inkjet of some sort. These printers will often use a combination of the cyan, magenta, and yellow inks to make black and shades of gray, and it is possible to get pink instead of gray if the cyan and and yellow are to low to provide a mix to produce gray. Try new ink cartridges to see if that makes any difference...some printers, like DesignJets use individual cartridges for each colour, and most small printers use a combination cartridget that contains cyan, magenta, and yellow ink in different reservoirs in the same tank.

If you are using a printer that doesn't require both the colour cartridge and the black cartridge in to function, try pulling out the colour cartridge and printing in grayscale. Most printer drivers are designed to recognize the fact that the printer only has the black cartridge in it and will automatically make the necessary adjustments.

well i think u hav a combinattion of c8 and c9 cartridges..
only use all c8 cartridges or only c9 cartridges..
dont use a combination of c8 c9 cartridges....
its debindas ingudam here

sounds like a problem with your fuser allso called a fixing unit.