Question about Avaya AT&T Merlin BIS 34D Telephone

1 Answer

Avaya 5 slot processor module PACS R6.O.B CO1 with 4 port messaging

We have 9 rotating lines on our phone system. When someone calls our office the first two lines light up but, our phone does not ring. People call right back and comment that they had just called but, that the phone never rang etc........

Posted by on

  • sanchez1026 Jul 10, 2008

    Thank You very much for responding to my problem but, fortunately I was able to figure that the voice messaging processor has gone bad! Again Thank you for courtious response. Ruben Sanchez

  • Anonymous May 11, 2010

    Does the line flash red while they call in?

×

1 Answer

Glad to hear it

Posted on Jul 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nec cant do inter office calls


Perhaps your phone automatically grabs an outside line, therefor when you dial you're making an outside call, so you need to grab the ICM line before making an internal call. Or, your phone is restricted from any calls without an access code, extremely rare.

Jul 02, 2014 | NEC Lands Phones

1 Answer

Line 1 disconnects people on hold


Try these first and let me know
Intercom does not function correctly
• Make sure line 1 is connected properly and common to all phones on the system.
• Make sure all phone ID’s (station numbers) involved have been assigned.
Transfer does not function correctly
• Make sure receiver phones (stations) have same line connected.
Intercom indicator turns red and green alternately
• The station address needs to be re-assigned due to a duplicate station address in the system. See “Changing the Phone ID (Station Address)”.
Good luck,
Lee

Jun 17, 2008 | GE RCA 4-Line Speakerphone

1 Answer

After power outage incoming calls cause all lines to light up


If this is happening on the entire system, then make sure you have the number of lines programmed correctly. If this is correct you may have a bad processor card. If this is a happening on an extension only, then the port/card may be damaged I would temporarily move the extension to another port on a different card and see if the trouble follows. If it does you have an issue with the phone not the port/card.

May 07, 2014 | Avaya Corded Phone avaparp18d

1 Answer

How do i forward a line to my cell phone?when someone calls my number and i am away from the office i would like the call to go directly to my cell phone


You will have to call your phone company and get them to roll your land line over to your cell phone (there is a charge for this) Note, anytime you do not answer your office line your cell will ring.

Apr 01, 2011 | Panasonic KX-T7633 Corded Phone

1 Answer

This issue just started this week with our Avaya 5420 phone system. When anyone in the office goes to make an outbound call, we dial the number, then receive a long silent pause and them sharp beeping...


You have a dead line somewhere. When you dial 9 it looks in a group of trunks for a call to go out on. Test the dial tone of all the lines. If that isnt it. There might be a problem in the ARS routing.

Dec 29, 2010 | Avaya 5400 Series 5410 Phone

1 Answer

Hi, I'm working at a doctor's office where we have the KX-T7731. Whenever someone is speaking on line 1, we cannot hear the ringtone for the incoming calls on line 2 or 3. Since this is a doctor's...


Let's pretend that this is connected to the TA family of phone sytsems. It could be one of 18 different systems, but let's guess.
From the intercom, dial 7311# and 7321# That sets the call waiting on busy for both outside and inside calls and lets the phone "soft ring".

The real question is whether you should have programmed more than one phone to ring, but I'll leave that for another time.

Carl

Aug 16, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

I am trying to help a church in NY with an Avaya system prob


Are you saying that line 3 does not work? Are you sure its not the dialtone? You could swap the cables going into line 2 and line 3, see if the problem follows the port or the dialtone.

May 06, 2010 | Avaya Corded Phone avaparp18d

1 Answer

Comdial Unisyn phones no longer ring in all locations


you can contact me at brcrory@buyrite.com depending on where you are i can service the system or recomend someone

Apr 09, 2010 | Comdial Unisyn 1122S Corded Phone

Not finding what you are looking for?
Lands Phones Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Lands Phones Experts

george  peters
george peters

Level 3 Expert

858 Answers

kakima

Level 3 Expert

98608 Answers

Cindy Wells

Level 3 Expert

4798 Answers

Are you an Avaya Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...