Question about DISH Network 135899 Remote Control

1 Answer

Remote (2) works to tun the TV on and off.... But nothing is working in the SAT mode. Remote (1) is working fine.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 29 Answers

Hi, Mary with Dish Network Customer Service. I am sorry you are having a problem with your TV2 remote. It sounds like it needs to be readdressed to the Dish receiver box. Take the remote to TV1, using TV1 remote, press the "Menu" button twice. TV screen should show "System Info", towards the bottom of the screen it will say "Primary Remote Address" and "Secondary Remote Address". Take TV2 remote, press and release the "SAT" button, on the top left corner of remote. The press the "Record" button 3 times. The number in the white box, next to "Secondary Remote Address" should have changed, if not unplug receiver from power for 10 seconds and then follow the instructions again. This should resolve your issue but if you are still having a problem, you may need to contact Tech Support directly. I hope this helps.

Posted on Jan 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Program dishnetwork remote


Anthony Stewart,

I hope this has been resolved for you by now, but if not I would be happy to help! Below I have listed the steps to program the remote to both the TV and Receiver. If you have any other questions, let me know!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if it works.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Jul 02, 2012 | DISH Network 32 Ir 137180 Remote 5900 3100...

1 Answer

My 5.3ir remote quit working for sattellite and tv functions,how would i go about re-programming it


Michael Jewer,

I can definitely help in programming your remote Michael. I have put below the steps to program a remote to your receiver and TV. This link will provide you with the codes for any equipment you wish to program.

Codes link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Addressing Remote to Receiver:
1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

Addressing Remote to TV:
1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you require any further assistance let me know here!

Tommy Faust
DISH Network

Oct 31, 2011 | DISH Network IR Remote Control

1 Answer

The number 2 remote control do not work the remote


ramoshummer,

I would need more information to provide you a specific resolution, but below I have included basic steps to programming your remote to both your TV and your DISH Network receiver.

Link for codes if needed: http://www.dishnetwork.com/SupportSection/remote-setup

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

If those don't solve your problem or you're experiencing a different issue let me know here or at thomas.faust@dishnetwork.com and I will check it out!

Tommy Faust
DISH Network

Sep 08, 2011 | DISH Network IR Remote Control

1 Answer

Dish Network controller doesn't work if you happen to pause or stop when the screen is black or on a dark picture. You have to turn TV and control box off then back on to regain controller.


falcondan

The remote works fine other than this stated problem? What type receiver and TV do you have? Do this just began occurring? Have you checked the batteries to make sure they are fresh? Is this on TV 1 or TV 2? One thing you may try is readdressing the remote to the receiver.

Remote: All Other Remotes
  1. Go to System Info screen (press Menu button 2 times on remote).
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button.
  5. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.

Jun 25, 2011 | DISH Network IR Remote Control

1 Answer

My remote wont work but sat and all other buttons light up but they do not work for guild or anything else plz help


Hey john_aust127. I would need more information to provide you a specific resolution, but I can at least give you some information to get you on the right path.

You can follow this link: http://www.dishnetwork.com/SupportSection/remote-setup which contains more information on programming your remote to your receiver, along with codes to program your remote to the TV. I have also provided the steps for both below.

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

If you have any other questions or would like any more help with this you can reach me here or at thomas.faust@dishnetwork.com

Tommy Faust
DISH Network

Jun 23, 2011 | DISH Network IR Remote Control

1 Answer

My remote contro can't turn on. code 137180. Can I reprogram it?.. thank you, Mary


Hey mpabon0712,

You can definitely reprogram your remote, though I am unsure if you are referring to the satellite or the TV. I will provide you steps for both just to make sure. If you need any help with the steps or codes you can also check out this link for more information:

http://www.dishnetwork.com/SupportSection/remote-setup

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #.
4.) Try functions (Volume, Power, etc..) and see if working.
5.) If no function, repeat steps 1-4 with another code.

Hope that helps and feel free to ask if you have anymore questions!

Tommy Faust
DISH Network

May 22, 2011 | DISH Network IR Remote Control

1 Answer

No communication between receiver and remote


amandaharwoo,

The first thing I would do, if you haven't already, is replace the batteries in the remote. The lights will still illuminate if the batteries are low but won't perform the remote functions. If that doesn't fix the problem, the remote may need to be readdressed to the receiver. I have provided the steps below. If you have further problems, please respond to the site.

  • Remote: All Other Remotes
    1. Go to System Info screen
    2. Hold down the SAT button until all mode lights light up.
    3. Enter a number between 1 and 15 using the numeric keypad on the remote.
    4. Press the pound (#) button
    5. Once the SAT button blinks three times, press record. Note: If successful the number selected in step 3 will appear in the System Info screen under Remote Address.

Ray Calo
DSIH Network

Jun 13, 2010 | DISH Network 721 DVR Remote Control

1 Answer

Dish network control not working on 2nd. tv


You have a dual receiver and 2 remotes. make sure that receiver is in dual mode. That you press the sat key on remote 2 if it will still not operate take remote 2 to the receiver. With remote #1 press the menu button twice you should then be on they system info screen. Pick up remote #2 press and hold sat key until it blinks press record 3 times . press red power button and if tv2 light goes off and on the remote should work again for tv2 . Use remote #1 press select exit screen,

Jun 02, 2010 | DISH Network IR Remote Control

1 Answer

Recently my TV2 connection has become an issue: I get the Press Select to watch TV on the screen, but the remote will not work. (This is a UHF remote) I've even replaced the remote - and yes it's a Dish...


Check your UHF antanae on the back of the reciver to make sure it is standing straight up. you can also see if the tv 2 remote works at the tv 1 location to check for interference. if you have a dvr check to make sure shared view is disabled by pressing menu option 6 then option 2 and the disable. if this option is greyed out, put your reciever into single mode by pressing the mode button and try again. if none of this works, If your tv 2 remote still does not work at tv 1 ( ie: changes chan at tv 2 location at rec but not at tv 2. then readdress your remote by pressing menu, opt 6, opt 1 and opt 3, this will be system info. do this at tv 1 location, then with tv 2 rem in hand, press the sat key till all buttons light up at top, then release, enter any number 1-15 that is different from rem 1 add. then press pound. then press record 3 times to see if number changes for rem add. 2. if not then you have a defective rec. call 1-800-333-3474 for technical assistance.

Nov 10, 2009 | DISH Network IR Remote Control

2 Answers

Having a problem...


Have you try pressing the SAT button?

Feb 10, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
DISH Network 135899 Remote Control Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...