Question about Apex Digital LD4088 LCD TV

1 Answer

My remote control suddenly stopped working. I replaceed the batteries and tried a universal remote with the same results. At first they worked if I was within a few feet of the tv. Now they work from farther away, but none of the buttons do what they are suppose to. The channels go in the opposite direction or skip several at once. Also, the volume goes up and down in the wrong direction or even go up and down with the menu button, the channel button, etc. The channels also change with buttons such as channel, menu, and the power button. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Apex Digital Master
  • 1,779 Answers

First I would unplug the set for 20 minutes. If that takes care of the problem, i would say the eprom had corrupted data. This in most cases will return. The other two things that can be at fault are the IR receiver in the set or the Micro Processor. In the event the later is the issue then I would take it in and get an estimate for the repair first.

Posted on Jan 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung Remote AH59-01778e not working


If it is a universal remote control, you have to set-it up once again, with the setup code to your device, after the battery replacement. If it is its original remote control, check whether the infrared emission from the remote control is OK or not. If you wish to get more information about how to check a remote control, and setup code list and set-up procedure to many popular brand remote controls (if the remote control is a universal one), try these links.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.
http://electronicshelponline.blogspot.com/

Jan 08, 2014 | Televison & Video

1 Answer

Remote for grundig glcd1906hdvw stopped working. Tried all the suggested "fixes".


It will be best to buy one universal remote control to setup with the TV, rather than trying to repair the present remote control. Setup code list to remote control will be there along with the packing. If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given. Check them and determine which remote control should be selected for your TV.

Mar 09, 2013 | Televison & Video

1 Answer

Suddenly without any problems for almost 2 years my remote control stopped working. I replaced the batteries, and still would not work. I went to Radio Shack and bought a universal remote, but I have tried...


I have very good luck with the Philips universal remote. The model number of the remote is SRP1003/27. I would suggest you find one the next time you are a a large discount store. The model number is near the upc code. Thanks for asking and show all hands of support!

Jun 01, 2011 | Philips 32PFL7332D 32 in. LCD HDTV

2 Answers

Sony RM-Y180 remote control


Did you install the batteries correctly?
Some remotes (Universal) need to be re-programed when you install new batteries.
Go to remotefinder.rca.com/default.aspx?site=rca for proper codes.

Oct 30, 2008 | Sony RM-Y180 Remote Control

1 Answer

Remote stopped working


original remotes of the unit don't require codes. check the battery, otherwise try using universal remote where codes are required for different models

Oct 15, 2008 | Samsung Televison & Video

2 Answers

RCA Universal Remote stopped working


I have the same problem on my RCA UNIVERSAL remote too..any one could me ?

thanks

Jan 08, 2008 | RCA 244889 Remote Control

Not finding what you are looking for?
Apex Digital LD4088 LCD TV Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...