Question about ParkerVision SIGNALMAX WR1500 (884181000031) Router

1 Answer

How to get to the DMZ

How can I get to the DMZ on ParkerVision WR1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 143 Answers

It seems that the wr1500 doesn't have a DMZ feature. im not sure if it has a latest firmware that will provide DMZ but what you can do is use the port forwarding feature. you just need to know the ports of the applications that you want to pass the router's firewall

hope this'll help you and just ask me if you have other concern

ciao!

Posted on Jul 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have two ParkerVision WR1500 4-port Wireless DSL/Cable Routers. The first one I have connected my Ethernet Cable from my modem to the WAN port. This is where I get my Internet Signal. My understanding...


You won't get internet connection that way because there is no connection between the first parkervision and the 2nd one.
Best way is use only one parkervision router. Connect WAN port to modem for internet, 1st lan port connect to your pc and 2nd lan port connect to 2nd pc in other room. 2nd way is, use only one parkervision. Connect WAN port to modem for internet, 1st lan port connect to your pc, setup wireless SSID and connect your 2nd pc to this router for internet wirelessly. Assuming your 2nd pc has wireless capability.

Apr 13, 2011 | ParkerVision SIGNALMAX WR1500...

1 Answer

Need the transformer specs for ParkerVision WR1500-WR3000


p/n 30-112-120602
model ad48-1201200du
here you go
input 120vac 60hz 250mA
output 12vdc 1200mA

Apr 26, 2010 | ParkerVision SIGNALMAX WR1500...

1 Answer

How do I secure my parkervision wr1500 router


You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here
for step by step instructions

Mar 24, 2010 | ParkerVision SignalMAX WR1500 / SignalMAX...

1 Answer

What is the parkervision wr1500 defaul password?


By default your password for this router is 1234, but if it doesn't work it means that it was change already so better try your commonly use password and if still wont work reset the router to bring it back to its default settings with default password.

Mar 23, 2010 | ParkerVision SIGNALMAX WR1500...

2 Answers

Voltage/Ma of AC adapter for WR1500??


The power supply on my ParkerVision WR1500 router is 12 vdc, 1.2a, center pin positive. http://straylightsoftware.com/downloads/parker2.html

Oct 29, 2008 | ParkerVision SIGNALMAX WR1500...

2 Answers

ParkerVision Signalmax WR1500


from the original docs:

Reset Button
The WR1500 Wireless Router reset button is built into the rear panel. Use this button to restore the factory default password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP sever enabled with a pool of 8 IP addresses starting at 192.168.1.33.

note my unit resets to ip 192.168.150.1

Sep 29, 2008 | ParkerVision SIGNALMAX WR1500...

1 Answer

Parker Vision Router WR1500


You need to forward the remote desktop port to your server. The Remote Desktop port is 3389. Go to the port forwarding section of your router and find out your Server's network IP address and assign it to forward the Remote Desktop port of "3389". Save your changes and try connecting again.

Sep 06, 2007 | ParkerVision SIGNALMAX WR1500...

2 Answers

Reconnection problem


first try conecting a defrent computer ot the router then try to connect to the net. if that don`t work then update the firmware try here http://itchy.parkervision.com/support/WiFi/downloads/index.php if that don`t work then call 937-278-9141.

Aug 29, 2006 | ParkerVision SIGNALMAX WR1500...

Not finding what you are looking for?
ParkerVision SIGNALMAX WR1500 (884181000031) Router Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top ParkerVision Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98816 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a ParkerVision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...