Question about Jura Capresso C1500 Espresso & Coffee Maker

2 Answers

How to reset machine when filter is changed - Jura Capresso C1500 Espresso & Coffee Maker

Posted by on

  • jmwhitehurst Jan 05, 2011

    I need to know how to reset this model so that it will stop reading need to replace filter after it is replaced

  • jmwhitehurst Jan 07, 2011

    Have changed filter on Capresso C 1500 but error message still appears prompting me to change filter. How do I reset.



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 5,370 Answers

To reset :---hold the filter button until the indicator light stops blinking and stays illuminated.---------- As per manual it says:----After 60 pots of coffee the green indicator light starts blinking. Replace the filter and push and hold the filter button until the indicating light stops blinking and stays illuminated. TIP: Once the filter is wet, certain cleaning agents will diminish over time. Replace the filter at least every six weeks or when the indicator light blinks, whichever comes first. ------------ Also see if the filter is not fitted properly.Remove the filter and refit it again and run the rinse cycle.Let the water once flow from the unit.Then see if still the filter indicator comes up. ------------- This should help.Thanks.Helpmech.

Posted on Jan 07, 2011


Click on the link below to contact Jura and they can provide you with the owners manual and instructions on how to reset your C1500 espresso and coffee machine:

CUSTOMER SERVICE 1-800-767-3554
Monday through Friday from 9:00 am to 9:00 pm E.S.T. and Saturday 9:00 am to 5:00 pm E.S.T.

P.O. Box 775, 81 Ruckman Road, Closter, NJ 07624
Phone : (800)767-3554, Fax : (201)-767-9684
email :

Posted on Jan 05, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the secret for resetting the IAP-10-100 machine after changing the filter?

Unit should filter air after hepa filter change/carbon filter clean/reinstall, but "change filter" indicator light will still be on. Insert a small diameter rod (bent paper clip) into "reset" hole (next to indicator) and push button, and indicator light will go off.

Note: Hepa filter can be vacuumed to extend life.

Jul 18, 2014 | Idylis Hepa Tabletop Air Purifier -...

2 Answers

Failure to change Filter Time

unplug projector for about an hour, and then remove bulb, and filter, inspect areas for damage, also inspect it to make sure your inserting it correctly. put filter and bulb back in, put covers back on, then plug it back in. reset the timer. if you still have problems let me know.

May 06, 2008 | Hitachi Performa CP-RS55 Multimedia...

1 Answer

Change the water filter

I believe that this is an automatic warning to get you to replace the inline water filter located in the back of the refrigerator side up near the top. This sells water filters at 30+ dollars a pop. There is a procedure in your manual to replace the filter, but you could just reset the warning by holding the "filter reset button" for 3 seconds. that button is on the front door of the machine.

Jun 13, 2014 | KitchenAid Superba KSRG25FK Side by Side...

2 Answers

How do i reset the waterfilter light


(Select Models)

For some refrigerator models featuring

water filters, the Water Filter Change

Reminder function monitors the life of the

filter and provides a reminder when it is time

for the filter to be changed.

When the system detects either 12 months

of usage, or the filtering of 416 gallons of

water (whichever comes first), the CHANGE

FILTER indicator light will illuminate. This

indicates that the water filter should be

changed and the light reset.

To reset CHANGE FILTER light: Press and

hold the LIGHT and LOCK pads until the

CHANGE FILTER light blinks (approx. 3

seconds). The control is now reset for 12

months or another 416 gallons.

Note: The Water Filter Reminder will

operate if the filter bypass is in place.

If you have other questions please let me know, Thanks Sea Breeze

Jun 10, 2011 | Jenn-Air JCD2389G Side by Side...

1 Answer

Red service light stays on.

this could be a filter clean just like a fridge when you clean filter it resets that you have changed filter,try cleaning your filter in machine and then turn off and restart washer if this doesnt work in your booklet if can help you reset this button as if you have had a service on machine.hope this helps you.

May 03, 2011 | Washing Machines

1 Answer

The control panel does not seem to work on the door. None of the switches work, ice,water, options, alarm. The change filter sign on the main display is highlighted. I tried turning the refrigerator...

Yes the filter needs to be changed after the change filter light is indicated.After changing the filter the unit has to be reseted.The reset procedure is as follows:--- press and hold the Water Filter Reset button for 5 seconds. Newer models: press the Options button until "filter change" is selected, press selection buttons +/- until the "filter change" display goes out.-------------------- Thank you.

Jan 31, 2011 | Siemens KA62DV50GB Side by Side...

1 Answer

It was time to change the filter and clean the coffee maker-I changed the filter and cleaned the coffee maker and now it will not work

You didn't say how you cleaned it but changing the filter shouldn't render it inoperative there is a reset button to reset the change filter timer but that shouldn't cause it to fail..Need more info.

Nov 28, 2010 | Kenmore DCC-KE12 Coffee Maker

2 Answers

Kyocera mita 6030

The optimizing performace may be because of the temperature in the room.Clean out all filters in the machine.Do not reset the drum light unless you do change the drum as the copy quality may degrade.

Apr 21, 2010 | Kyocera Mita Office Equipment & Supplies

3 Answers

Change the waterfilter

select waterfilter from the menu and select reset the change waterfilter message will not be there anymore i have the upgraded model the ekv 6600.1m

May 17, 2009 | Kuppersbusch K?ppersbusch EKV 6800.0 M...

1 Answer

How to reset?

The button I think you are talking about is the bag switch. It is located in the bottom right corner where you put the bag. If the bag does not cover it, the machine will not run.
Also, when the machine cuts off when the bag is full, you have to push the power switch off and back on to reset the full bag switch located in the switch control housing inside the machine.

Mar 13, 2009 | Electrolux UltraLux 2000 Bagged Canister...

Not finding what you are looking for?
Jura Capresso C1500 Espresso & Coffee Maker Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1889 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides