Question about Desa International Blower Glow Warm Wall Heater

1 Answer

My glo-warm wall mount heater pilot light will not light. I tried the ignitor, saw blue spark , and nothing. I also tried using a lighter, I got it to light barely once and that was it. I can't smell any gas coming through the line either?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 146 Answers

Without the model number of the heater it is hard to give an accurate answer but I will give you some suggestions.

I would start with cleaning the pilot ODS assembly.
http://www.msservice.net/ts/reseat_thermo-clean_pilot-ODS.htm

I would check the regulator on the heater...if it is propane these gas get raw gases in the regulator and cause the unit not to pressure up correctly.

Give these items a try first before replacing any parts.

Thanks

M Cramer
www.allpartsinc.com

Posted on Jan 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When my glo warm heater reaches desired temp it not only shuts off but pilot light goes out too.


Maybe it's a direct spark ignitor so when call for heating pilot would open and spark ignitor would lite it

Jan 05, 2018 | Heating & Cooling

1 Answer

Pilot light wont light will spark, but no propane


verify the inlet pressure to the heater. those pezioelectric spark lighters are garbage. make sure all manual shut off valves to the heater are open. Pilot tubing may also be blocked

Nov 25, 2013 | Glo-warm 503284 30000 BTU Propane Gas Vent...

1 Answer

Pilotlight will not light, getting spark, but no propane.


make sure you have the gas valve knob on turned to pilot while pressing that down while pushing the spark it should light or it is tripped on a safety like rollout switch or oxygen depletion sensor if equipped which all ventless heaters are

May 12, 2009 | Dyna-Glo D-E37 Wall Mounted Panel Heater

1 Answer

Dyna-glo parts


thermocouples you can buy from any heating spares oulet or national energy a hone well is most common for useing as a replacement

Feb 03, 2009 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

4 Answers

Comfort glo propane ventless heater won't light


I have several of these heaters in my rent houses and love them. The most problem I have is not being able to ignite the pilot with the user control igniter. Remove the screws that hold the front cover in place along with the front cover. Hold the pilot control down and ignite with a lighter. Keep the pilot engaged until thermocouple is warm enough to keep pilot gas flowing. If it will light this way then you need to blow out the pilot orifice. It seems that every year I have to go in after the summer season when the heater is off and clean the pilot/orifice lines with high pressure air. I believe spiders/bugs/dust block pilot orifice when it is not in use. You can also tell that orifice is blocked when you don't get a good blue pilot flame with pressure behind it allowing the flame to submerse the thermocouple. If the the thermocouple is not getting enought heat it will turn pilot gas off for safety reasons.

Nov 16, 2008 | Desa International GWP20T GLOWARM Wall...

2 Answers

My glo-warm propane heater keeps shutting off automatically-pilot and all.


my heater says if the pilot light keeps going off automatically it is a safety function that means it does not have enough fresh air to operate

Nov 03, 2008 | Desa International Blower Glow Warm Wall...

2 Answers

Natural Gas Heater Dyna-Glo


it s the thermocouple excannge it should solve the problem , try national energy they do spares

Feb 16, 2008 | Dyna-Glo D-E37 Wall Mounted Panel Heater

3 Answers

Glo-Warm Wall Gas Wall-heater parts...


We had a problem keeping the pilot light to stay on, and this site recommended that it could possibly be the thermocoupler that was causing our problems also. We ordered the thermocouple, put it on,hooked it back up and it worked great! Thank you so much.
ordered thermocouple from www.masterparts.net

Nov 19, 2007 | Rinnai Desa Vent-Free Infrared Gas Heater:...

Not finding what you are looking for?
Desa International Blower Glow Warm Wall Heater Logo

679 people viewed this question

Ask a Question

Usually answered in minutes!

Top Desa International Heating & Cooling Experts

Paul Carew

Level 3 Expert

3315 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

vance jones

Level 2 Expert

120 Answers

Are you a Desa International Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...