Question about Singer Sewing Machines

1 Answer

I have a touch & sew model 755. it is a backup for my other singer. The bobin case keeps jumping out of the slot it goes in. Just got this mach. no books with it. The thread birdnests on the bobbin side of the fabric. It acts like the bobbin case is too loose.

Posted by on

  • dottieking24 Jan 04, 2011

    You can keep your answer! I think it is really bad when you charge for a simple question. I am not asking you to repair the machine. I just think it needs to be threaded right. a simple picture would have been fine.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,788 Answers

I think that you may have the wrong size bobbin in it or you need a new bobbin case. If, you go online to you can see a new case, also a repair kit for the bobbin. They also sell bobbins for this machine. In my search for this info, I found a site that had a free copy of your manual, It looks like you have got yourself one little beauty. Hope it works good for you but if not I am sure that you would lots of takers for it. Good luck and Happy New Year.

Posted on Jan 04, 2011

  • Mary Dunn Jan 04, 2011

    I do not receive any money for my answers, I do it to try and help people in this economy. In fact, I always click on the ones that do not have any money involved. So, I do not blame you for being angry but please do not be mad at me.

  • Mary Dunn Jan 04, 2011

    I also spotted a free threading diagram, on for your machine. I really had no idea that you were being charged when I deliberately pick ones that no one else wants because there is no payday. Hummmmm


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to reinstal a matrix of bobine in a sewing machine singer 6218?

go google and type in ---workshop manual for singer sewing machine model 6218--- and there is a site .com that has a download version
there are other site as well it that is not what you want

Nov 26, 2015 | Singer Sewing Machines

1 Answer

Singer sewing machine Model 9134, problem trying to put the bobin case back in after cleaning, how do I put it back together?

make sure the needle is in the upper most position and the clip on the bobbin case is facing you
It should just clip in on the shaft

May 01, 2015 | Singer Sewing Machines

1 Answer

I have a Singer Touch and Sew #758. The bobbin case keeps popping out of possition when I try to sew. I have cleaned and oiled the machine, checked all the threading, tried different bobbins, etc. The...

it does sound as if the sprung bracket is not holding the case in position. Move the latch to the right, remove and install the case and then move the retainer back into its proper position

Feb 17, 2014 | Singer Drop-In Bobbin 758B-28BH Mechanical...

2 Answers

Model 8280. The thread on the bottom keeps bunching up. It is a horrible mass of thread. Then, it stops moving. Can you help me?

I had the same problem and I tried everything including removing the bobin case, cleaning out lint, changing the needle, adjusting the tension but it did not work. Then I finally tried reloading the bobin thread, making sure to load the bobin according the manual directions....and the problem was more tangles... just a nice even stitch...yeah!

Jan 04, 2009 | Singer 8280 Mechanical Sewing Machine

1 Answer

My Singer 2639 Bobbin case pops up out of position after few stitches and needle hits case, Singer says it needs retiming and take it to repair. I cannot continue paying repair as this happens too often.

Hi, I used to have the same problem. I pulled the whole bobin casing out, cleaned it oiled it. When I put it back in, I made sure the actual bobin was turing the right direction so the cotton didnt snag and pull casing up.

If you havent already tried this give it a go.Its amazing how much gunk gets in there.

Sep 03, 2008 | Singer 7462 Mechanical Sewing Machine

2 Answers

I have model 8280 and the bobbin thread keeps bunching up on the bottom. I have tried to rethread it but it keeps happening.

i think your putting in your bobin backwards,
to check put your bobin in and hold bobin , and bobin case by thread if it unrolls its backwards,
hope this helps!!

Jul 26, 2008 | Singer 8280 Mechanical Sewing Machine

1 Answer

MY machine has never worked perfet liked I hoped it would. When I embroider the top thread ends up all lose and

This could be caused by many things but I would suggest that you take the machine to your local dealer for them to have a look at as the bobbin case may be the problem and they may have to replace it. If you look at the bobbin case it should be smooth all the way around - if there's rough edges then that could cause a problem. Also if the bobbin case jumps out of the socket then this is a good indication that you need to have it replaced.

Apr 26, 2008 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5101 Answers


Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides