- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the modem came with a disc, run it, the drivers are probably missing. If you don't have a disk then you need to go to your control panel, go to add hardware, look for any icons that have yellow questions marks on it, fix it and your good to go. Or you may need to renew your IP address. Without an address you can't go online. Hope this helps.
You need to configure the modem for it to allow game hosting. Enable NAT/GAMING setting of your modem. You can do so by pulling its interface and configure the settings from there. The interface of the modem can be pulled up by typing the default gateway of the modem in the address bar of a browser.
erm...cant you just plug in your 3 usb to your pc and connect to your ps3 via the ethernet cable? that should work...but i think the main issue is that it might be too slow to play online...either that or you play online for ten mins and then your done for the month lol
The answer is posted by user Andreole on Amazon.com :The web is full of posts by irate purchasers of this little camera that simply couldn't get it to work. With good reason. The software that is shipped with the product is total junk. Fortunately what is available on-line is better. Here's how to solve the black screen problem on an XP. The key is not to allow the machine to install the driver for you. You must install the driver from the device manager in your system folder. The reality is that it is a nice little device ONCE you get it to work.
First, toss the software that came with the camera. Go to http://www.dynexproducts.com/pc-459-10-dynex-desktop-web-camera.aspx and download the software you actually need to run the device. (If you previously installed the software, it would be best to remove it before starting.) Download the new software, unzip it and you'll have a dynex folder containing an install file. With your camera NOT connected to your computer, install the software, including the WebCompanion2 program from ArcSoft (this will happen automatically after the Dynex software installs). Reboot if asked to do so. Hook up the camera. Abort any attempt by the computer to search for the needed driver itself. Go to your control panel and find your systems folder. In that folder, find the device manager under the hardware tab. Locate "imaging device" and locate the Dynex camera. Right click on it, then select "update driver". Again, don't let the computer find what you need. Opt to manually locate it and direct the computer to look to the dynex folder most likely on your desktop or found under Programs. Three drivers are found. Two certified and labeled "PC Cam", the other not certified and labeled "Dynex Cam". Select Dynex. That's it. Your camera should work.
Obviously, this is not the way these products should work. You should not have to go through so much grief just to install it.
You need to log on to the router using the default gateway.
Go to Start menu -> Accessories -> Command Prompt
Note the default gateway
open your browser, in the address bar type in the default gateway ip address - like 192.168.1.254 --- or whatever the IP is.
That should open your router config pages... if it asks you for a user name and password... default usernames depend on your ISP usually, but try for the username Admin, admin, Administrator, administrator and for the password try the same as the username or leave blank... If you have no luck contact your ISP for logging on details.
A web page will open - go to
Game And Application Sharing
At top right click configure
Make sure UPnP and Extended Security are selected if you have those options
Then at the bottom
Create a New Game or Application
from there you just need to select which protocols you need to work with or select ANY
Enter the port you want opened
and add the same port number to the destination / trigger port.
That should be you. If not you need to telnet into you router
Telnet <default gateway IP>
and type Menu
The follow the previous instructions.