Question about Savv LM-S6001 Car Monitor

1 Answer

Need video jack

How do i find a replcement video jack for my savv from system to the headrest monitor??

Posted by on

  • ericpine Feb 25, 2009

    I am looking for a pinout or some information for my SAVV LM s6001 LCD screen (so I can use it!). Funny how you cant find a single thing about this device. I'll try to get some generic info and do some testing in my spare time.

  • ericpine Feb 25, 2009

    I am looking for a pinout for ready cable for my SAVV LM-S6001 LCD screen. I will do a bit of tesiting in my spare time with the data I have and do find.



    -ep

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I interfaced the SAVV LM-S6001 today. Here's what I found;

Looking straight on at the male 8 pin DIN connector here's how I'll describe it. There are 3 pins across the top row. From left to right I'll call them 8, 7, 6. There are 2 pins on the left side of the middle row, 5 leftmost and 4 adjacent to the center. Moving right, there is a gap and then pin 3 on the rightmost side of the middle row. There are two pins on the bottom row, pin 2 on left and pin 1 on right. Draw that on some paper.

8 7 6
o o o
5 o o o 3
o o
2 1

Pin 1 is +12VDC
Pin 2 is center contact of both audio and video RCA jacks
Pin 3 is -12VDC
Pin 4 is outer RCA contact for Video
Pin 5 -n/c
Pin 6 -n/c
Pin 7 -n/c
Pin 8 is outer RCA contact for Audio

Now, I don't know what pin 7 does, but it is wired next to pin 4 suggesting a video application, Svideo is my best guess. I can only test for a composite video connection that I am using.

It's alive!

Posted on Mar 01, 2009

  • ericpine Mar 02, 2009

    Something is going on with my pinout, I am getting noisy audio. I will revise my solution asap. I am dealing with a Pal device here in the states, so I might need a second opinion here. At the least, my power pinout is correct.

  • ericpine Mar 02, 2009

    Ok, here is the revised pinout



    Pin 1 is +12VDC
    Pin 2 is center contact video RCA jack
    Pin 3 is -12VDC, AUDIO GROUND, (outside can of audio RCA plug)
    Pin 4 -n/c
    Pin 5 -n/c
    Pin 6 -n/c
    Pin 7 -Video Ground (outer can of video RCA plug)

    Pin 8 is center pin RCA contact for Audio




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to convert 8 pin s- video to rca savv


only way is to look online for adapter, if available.

Jun 15, 2014 | Car Video Monitors

1 Answer

How do i make the headrest poles wider?


good day, most of the headrest can be adjust horizontally just besides the poles. hope this helps, have a nice day

Feb 09, 2010 | Power Acoustik HD-8BK 8" UNIVERSAL...

1 Answer

There is a buzz through my lcd headrests when car engine is running. The amount of buzz & pitch is proportional with engine revs


You need a surpresser.
The problem is that there is 'feed back',
from the alternator output to the head unit.
Have fun:

Jul 26, 2009 | Icon MT-5800 5.8'' Widescreen Headrest LCD...

1 Answer

Dual DVD Headrest System


you could try an fm modulator which allows you to tune your radio to the set frequency and then gives you sound through your speakers

May 23, 2008 | Myron & Davis Myron Davis 6.0 " TFT/LCD...

2 Answers

Connecting headrest monitors to Kenwood DDX-6019


Youll have to run sets of cables from your head unit to the seats, youll prob only need video, power, and ground if the sound will come from your speakers. For the same display on either monitor run to first position then link the 2 monitors.

May 10, 2008 | Sony XVM-R70 7 in. Car Monitor

1 Answer

HD-95 Headrests


i ran 3 wires from my amp and the rca jacks to the tv and they work fine. a hot ground and remote.

Apr 09, 2008 | Power Acoustik HD-95 Car Monitor

1 Answer

10.4 inch headrest lcd monitors


MOST OF ALL VIDEO OUTPUTS AR NOT STRONG I SUGGEST
ADD A VIDEO AMPLIFIER

Mar 18, 2008 | Car Video Monitors

1 Answer

No picture


A blue screen suggests no input signal, or a signal that the electronics in the screen can't handle. I don't think you need the remote, but, it may help. I suggest you try the dvd on a working monitor and check that it's a compatible output. The LM-S6001 is a multi-system monitor both NTSC(US) and PAL(Europe/Aisa). The monitor has a composite video (usually yellow) and RCA(phono) input and DIN, the manufacturer is unclear if both plugs are present. You can assume it's auto-switching, but that may not be the case. More information is needed to fully understand your problem. 1. make/model of DVD. 2. description of external plugs on monitor.

Apr 24, 2007 | Savv LM-S6001 Car Monitor

Not finding what you are looking for?
Savv LM-S6001 Car Monitor Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Savv Car Video Monitors Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Custom Exchange
Custom Exchange

Level 3 Expert

397 Answers

yadayada
yadayada

Level 3 Expert

61289 Answers

Are you a Savv Car Video Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...