Question about Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

1 Answer

Clean lite is on and unit will not run - Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Posted by on

  • brianlangows Jan 04, 2011

    unit reset but still does not run

  • brianlangows Jan 05, 2011

    you guys are the best Thanks for the help you guys rock

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

Try pressing normalwash-heatdry-normalwash-heatdry-normalwash-heatdry-normalwash-heat then all the lights come on. Let run for a little bit. then keep pressing the start button. untell the unit shuts off, then try running a cycle. The control board has a memory in it. So if you have cold water running in it one time. It will take longer to warm up. Your memory in the control board says its taking to long to warm up. Shutting down thinking their is something wrong with your heating cycle.

Posted on Jan 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unit has power bur will not turn on


You need to be specific to get help. Just what is happening? What is not turning on? The compressor? The fan(s).

Is thermostat properly set?

Jun 19, 2016 | Heating & Cooling

1 Answer

Unit takes about a minute to light then the built up gas explodes(for lack of a better word). Unit runs fine after that. This can't be right. What could be the problem?


burner orifices need to be cleaned out. pull the burner assembly out and clean the burners and manifold orifices. im surprised the flame roll out didn't blow the fusible link

May 31, 2014 | Jandy Lite 2 Natural Gas Pilot Light...

1 Answer

Gateway 500C: Dead. green PSU lite doesn't lite when pressing test switch


Obviously your Power Supply Unit is dead. You just have to replace it.

Feb 17, 2013 | Gateway Computers & Internet

2 Answers

Gas furnance won't stay lit.


have a furnace man take a look it sounds like the itermitter control

Feb 05, 2009 | Goodman GMS80904BNA Open Flame Mid-Size...

1 Answer

Toshiba TDP SC25 projector


The manual says it might be because the power went out when it was on. Just a note here, as projectors age they become more sensitive to power outages. When not in use turn off completely if you can. They have an on/off button.

Otherwise not sure but think you may need to replace the fan. Try cleaning it first but gently.

Jan 31, 2009 | Toshiba TDP-SC25U Multimedia Projector

1 Answer

Ds lite


sounds like bent pins or possible dirty systems needing a cleaning. If Lob_12345 would be willing to sell/trade for one of the broken units I would be able to run further tests with this issue. you can contact me at scrodamoon@gmail.com

and as far as a defect....anything man made ushally breaks at some point...unless its cast iron and 600lbs and built to with stand a war.

Jul 27, 2008 | Nintendo DS Lite Console

1 Answer

Ionic breeze quadra s 1837


I had a problem with my Ionic Breeze Quadra. Green light would only blink for a second then the red light stayed on. I cleaned unit very good but problem came right back. I blew out the breeze with an air compressor. Not much came out, but now I am green and back in action. I used about 75 psi to clean out.

Mar 23, 2008 | Sharper Image Ionic Breeze® Quadra® Air...

1 Answer

Nintendo ds lite


Try opening the system up and cleaning it out.

Dec 20, 2007 | Nintendo DS Lite Console

1 Answer

Invalid disk error


I had a problem with a Lite-On Lite-On that had been working fine then stopped reading any disc--sometimes it would go through the motions of recording if a disc was in and a timed recording was due to start. After recording it would not read the disc. A google search led me to find the a dirty laser would cause this. I removed the cover and with a clean lint free cloth I used rubbing alcohol to clean it and it has worked fine since. While I had the cover off I took the unit to my garage and used an air compressor to blow all the dust out of the unit and cleaned the laser again just in case. That was about 6 weeks ago and it works fine. My unit has a cooling fan that I think contributed to the dust problem.

Nov 14, 2007 | Lite On LVC-9016G DVD Recorder/VCR

Not finding what you are looking for?
Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103 Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...