Question about Epson AcuLaser C900 Printer

1 Answer

Photoconductor Epson Aculaser c1100

I read your article on replacing a fuse in the C900. Do you know if there is a similar fix for the C1100? If so where? I hope you can help! The printer was producing perfect copies then just stopped and asked me to replace the very expensive photoconductor

Posted by on

  • Silverpajoe Oct 07, 2008

    Exactly the same pb, I've found a piece on the side of Photoconductor, what to do with it, or where to find such a part (similar a coin of money, in it you can see a self, and in the middle a very tiny piece like a microcircuit)

  • Anonymous Oct 20, 2008

    I not want to spend for new photo conductor unit because it is good

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This link offers you the rc1100 drum eset chip and how to fit it...

http://www.zinetic.co.uk/Epson_Aculaser_c1100_Drum_Reset_Chip-details.aspx

Posted on Oct 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson Aculaser Photoconductor Unit problem !!!!


send it back and get a refund and try another supplier

Jan 30, 2012 | Epson Aculaser C1100 Printer

1 Answer

After changing the black cartridge of epson aculaser c1100, a message flashed: Service Req E511


Hello,

Welcome to FixYa, the world's largest product support community.

The message E 511: Service Required is commonly due to the Photo Conductor Unit's tabs getting stuck. So the first thing we need to do is to remove the PHoto Conductor Unit. Here are the step to remove the Photo Conductor Unit off of your EPSON Aculaser C1100.

1. Turn the printer on, and open cover B.

deathschythe_1.jpg


2. Raise the yellow lever inside cover B.
deathschythe_2.jpg

3. Remove the photoconductor unit.

deathschythe_3.jpg

4. Check the white tabs on the underside of the photoconductor unit. These are spring-loaded plastic tabs that should depress when you press and release it. If the white tabs no longer spring back you need to replace the photoconductor unit.

After removing or ultimately replacing the photoconductor unit, please follow the step by step giude on how to remove the photoconductor unit in reverse order.

Jun 09, 2011 | Epson Aculaser C1100 Printer

2 Answers

Error: service reg E511 what does this mean?


Part of the photoconductor unit known as the transfer belt is not being detected when the E511 Service Requested error comes up. Epson in the UK has the troubleshooting outlined here:

http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support;jsessionid=035E9EA2127A8A5A478481112D9F98B2.acc2?target=article&extn=.html&articleId=1319

Jun 19, 2010 | Epson Aculaser C1100 Printer

2 Answers

Espon aculaser c1100 service req e511


Error E511 is due to ur photoconductor.. the black transfer belt is out of position... it can be corrected if you know how to open up the photoconductor unit...

May 14, 2010 | Epson Aculaser C1100 Printer

1 Answer

I HAVE E511 PROBLEM ON THE C1100


The "Service Req E511" error message means that part of the photoconductor unit called the transfer belt is not being detected. Please see the following Epson article which may help. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

Jan 29, 2010 | Epson Aculaser C1100 Printer

2 Answers

Epson C1100 Photoconductor kill chip


You can buy a new chip , empty the waste toner and then keep printing. Its only if the message is "replace photocnductor " though..

http://www.tonerangel.us/instructions/default.aspx

Jan 07, 2009 | Epson Aculaser C1100 Printer

1 Answer

Epson C1100 Print quality


no this is not a photoconductor problem. your fuser unit is faulty, it is not getting up to the correct temprature to "fuse" the toner to the paper hence why you are able towipe the toner from the page. Hope this helps Cops Pete@wedotoners.com

Oct 10, 2007 | Epson Aculaser C1100 Printer

Not finding what you are looking for?
Epson AcuLaser C900 Printer Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4948 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...